Abstract:This study presents a one-dimensional, non-isothermal, steady-state model to analyze performance of an anode-supported solid oxide fuel cell (SOFC). The modeling domain encompasses components including a NiO-YSZ support and functional layer forming the anode, a YSZ electrolyte, a GDC interlayer, as well as LSCF+GDC and LSCF constituting the cathode. The model distinguishes different types of electrode polarization resistances using experimental impedance data at various temperatures under open circuit voltage (OCV), employing a detailed equivalent circuit model to determine the temperature and partial pressure dependencies of electrode exchange current densities. Moreover, this approach serves as an efficient method for estimating the conductivity of both the anode and cathode. As a result, activation energies and ohmic overpotentials are derived, considering microstructural and geometrical aspects, which allows for accurate quantification of the ohmic resistance associated with ionic conduction. The model incorporates coupled multi-physics elements, such as mass and charge transport, electrochemical reactions, and heat transfer. A notable feature of the model is its consideration of reaction zone layers near the electrolyte, where electrochemical reactions generate electrons, oxide ions, and water vapor. Enhancing prediction accuracy, the model applies multilayer discretization within the electrode and electrolyte to reflect actual material properties and localized conditions more accurately. The model predicts the performance of a single-cell SOFC using pure hydrogen at the anode and varying oxygen concentrations (100%, 50%, 20%, and 10%) at different operating temperatures (700°C, 660°C, 620°C, and 580°C) and design conditions. Simulated results are compared with experimental data, and the impact of various operating and design parameters on SOFC performance is examined. Findings indicate that kinetic and concentration overpotentials in an anode-supported SOFC are lower than ohmic overpotentials, even at higher current densities. Furthermore, ohmic overpotential is identified as the primary contributor to total cell potential loss, highlighting the need for its minimization to improve cell performance.

Numerical Modeling of Electrolyte-Supported Button Solid Oxide Direct Carbon Fuel Cell Based on Boudouard Reaction

Numerical Modeling and Current Collection Designs for Flat-Chip Solid Oxide Fuel Cell

Numerical Simulation and Optimization of Operating and Structural Parameters for Solid Oxide Fuel Cell

Towards Feasible Temperature Management and Thermo-Mechanical Stability of Carbon-Assisted Solid Oxide Electrolysis Cell

Experimental Characterization and Elementary Reaction Modeling of Solid Oxide Electrolyte Direct Carbon Fuel Cell

Numerical modeling of an anode-supported SOFC button cell considering anodic surface diffusion

Thermo-Electro-Chemo-Mechanical Coupled Modeling of Solid Oxide Fuel Cell with LSCF-GDC Composite Cathode

Elementary reaction kinetic model of an anode-supported solid oxide fuel cell fueled with syngas

Effect of the Reactant Transportation on Performance of a Planar Solid Oxide Fuel Cell

Numerical research on carbon activity, fuel utilization, chemical reaction, and temperature distribution for IT single planar SOFC

An Analytical Model for an Anode-Supported Solid Oxide Fuel Cell

Elementary reaction modeling and experimental characterization of solid oxide fuel-assisted steam electrolysis cells

Research and Development of Solid Oxide Direct Carbon Fuel Cell

Evaluating the effectiveness of the modified multi-scale multi-physics coupled model for solid oxide fuel cells: A comparative analysis

Numerical simulation of carbon deposition in solid oxide fuel cells

Solid Oxide Fuel Cell Porous Cathode Micro Modeling and Performance Prediction

Simulation-guided design of a finger-like nickel-based anode for enhanced performance of direct carbon solid oxide fuel cells

Numerical Analysis of the Internal Fuel Processing in Solid Oxide Fuel Cells

Experimental Characterization and Modeling of the Electrochemical Reduction of CO2 in Solid Oxide Electrolysis Cells

Numerical Simulation of Multi-Channel Planar Solid Oxide Fuel Cell Unit by Integrating Continuum Micro-Scale Pen Sub-Model

Mechanistic Model Development and Performance Study of Cathode-Supported Tubular Solid Oxide Fuel Cell