Isolation of 17-alpha-estradiol 17-beta-D-glucopyranoside from rabbit urine, and its synthesis and characterization.

D. G. Williamson,D. Collins,D. S. Layne,R. B. Conrow,S. Bernstein

DOI: https://doi.org/10.1021/BI00839A012

IF: 3.321

1969-11-01

Biochemistry

Abstract:

What problem does this paper attempt to address?

LinkLab: A Scalable and Heterogeneous Testbed for Remotely Developing and Experimenting IoT Applications

Yi Gao,Jiadong Zhang,Gaoyang Guan,Wei Dong

DOI: https://doi.org/10.1109/IoTDI49375.2020.00025

2020-01-01

Abstract:Developing and experimenting IoT applications are still difficult and time-consuming, mainly due to their heterogeneous hardware and diverse software. Testbeds are useful for developers to test the performance of IoT applications before deploying them to the fields. In this paper, we present LinkLab (http://linklab.emnets.org), a scalable IoT testbed for heterogeneous devices. Compared with existing IoT testbeds, LinkLab not only supports running experiments but also supports remote development via a web-based IDE and remote compiling. Therefore, LinkLab is able to improve the efficiency of the developing-experimenting-optimizing loop for IoT developers. By using a distributed architecture, LinkLab is a scalable, multi-site, and multi-user IoT testbed, with fine-grained access control and a flexible naming mechanism. Further, an incremental online compilation and a multi-user cache techniques are used to speed up the cross compilation process. LinkLab is implemented with more than 150 IoT devices and evaluated by case studies, micro-benchmarks, and real experiments. Results show that LinkLab achieves convenient application development, efficient online compilation, and robust device management under various evaluation settings.
An Open, Programmable, Multi-vendor 5G O-RAN Testbed with NVIDIA ARC and OpenAirInterface

Davide Villa,Imran Khan,Florian Kaltenberger,Nicholas Hedberg,Ruben Soares da Silva,Anupa Kelkar,Chris Dick,Stefano Basagni,Josep M. Jornet,Tommaso Melodia,Michele Polese,Dimitrios Koutsonikolas

DOI: https://doi.org/10.48550/arXiv.2310.17062

2024-03-15

Abstract:The transition of fifth generation (5G) cellular systems to softwarized, programmable, and intelligent networks depends on successfully enabling public and private 5G deployments that are (i) fully software-driven and (ii) with a performance at par with that of traditional monolithic systems. This requires hardware acceleration to scale the Physical (PHY) layer performance, end-to-end integration and testing, and careful planning of the Radio Frequency (RF) environment. In this paper, we describe how the X5G testbed at Northeastern University has addressed these challenges through the first 8-node network deployment of the NVIDIA Aerial RAN CoLab (ARC), with the Aerial Software Development Kit (SDK) for the PHY layer, accelerated on Graphics Processing Unit (GPU), and through its integration with higher layers from the OpenAirInterface (OAI) open-source project through the Small Cell Forum (SCF) Functional Application Platform Interface (FAPI). We discuss software integration, the network infrastructure, and a digital twin framework for RF planning. We then profile the performance with up to 4 Commercial Off-the-Shelf (COTS) smartphones for each base station with iPerf and video streaming applications, measuring a cell rate higher than 500 Mbps in downlink and 45 Mbps in uplink.

Networking and Internet Architecture
Performance Analysis and Comparison of Full-Fledged 5G Standalone Experimental TDD Testbeds in Single & Multi-UE Scenarios

Maryam Amini,Catherine Rosenberg

2024-07-02

Abstract:Open-source software and Commercial Off-The-Shelf hardware are finally paving their way into the 5G world, resulting in a proliferation of experimental 5G testbeds. Surprisingly, very few studies have been published on the comparative analysis of testbeds with different hardware and software elements. In this paper, we first introduce a precise nomenclature to characterize a 5G-standalone single-cell testbed based on its constituent elements and main configuration parameters. We then build 30 distinct such testbeds and systematically analyze their performance with an emphasis on element interoperability (by considering different combinations of hardware and software elements from different sources), the number and type of User Equipment (UE) as well as the Radio Access Network hardware and software elements to address the following questions: 1) How is the performance (in terms of bit rate and latency) impacted by different elements? 2) How does the number of UEs affect these results? 3) What is the impact of the user(s)' location(s) on the performance? 4) What is the impact of the UE type on these results? 5) How far does each testbed provide coverage? 6) And finally, what is the effect of the computing resources available to each open-source software? This study focuses on TDD testbeds.

Networking and Internet Architecture
Fully reconfigurable cognitive OFDMA testbed

Lianxiang Wang,Zhaoyang Zhang,Lu Ye,Benkang Gong,Wentao Lou

DOI: https://doi.org/10.1109/ChinaCom.2011.6158290

2011-01-01

Abstract:In this paper, we report our design and implementation of a testbed for demonstration of cognitive OFDMA transmission. Our implementation is based on a powerful fully programmable software radio platform, i.e., the Microsoft Research Software Radio(MRSR) platform. Two kinds of nodes are designed in the testbed, one acts as the primary user(PU) which communicates in the authorized frequency band with dynamic spectrum activity, and the other acts as the secondary user(SU) which opportunistically accesses the vacant frequency without disrupting the transmission of primary user. To this end, the SU nodes are equipped with reliable multi-carrier sensing functionality, as well as some special multi-channel signalling and processing capabilities. Test results show that the SU nodes can alter their power, frequency and other parameters dynamically and communicate efficiently in response to the PU's spectrum activity.
A Modular, End-to-End Next-Generation Network Testbed: Towards a Fully Automated Network Management Platform

Ali Chouman,Dimitrios Michael Manias,Abdallah Shami

2024-03-23

Abstract:Experimentation in practical, end-to-end (E2E) next-generation networks deployments is becoming increasingly prevalent and significant in the realm of modern networking and wireless communications research. The prevalence of fifth-generation technology (5G) testbeds and the emergence of developing networks systems, for the purposes of research and testing, focus on the capabilities and features of analytics, intelligence, and automated management using novel testbed designs and architectures, ranging from simple simulations and setups to complex networking systems; however, with the ever-demanding application requirements for modern and future networks, 5G-and-beyond (denoted as 5G+) testbed experimentation can be useful in assessing the creation of large-scale network infrastructures that are capable of supporting E2E virtualized mobile network services. To this end, this paper presents a functional, modular E2E 5G+ system, complete with the integration of a Radio Access Network (RAN) and handling the connection of User Equipment (UE) in real-world scenarios. As well, this paper assesses and evaluates the effectiveness of emulating full network functionalities and capabilities, including a complete description of user-plane data, from UE registrations to communications sequences, and leads to the presentation of a future outlook in powering new experimentation for 6G and next-generation networks.

Networking and Internet Architecture
X5G: An Open, Programmable, Multi-vendor, End-to-end, Private 5G O-RAN Testbed with NVIDIA ARC and OpenAirInterface

Davide Villa,Imran Khan,Florian Kaltenberger,Nicholas Hedberg,Rúben Soares da Silva,Stefano Maxenti,Leonardo Bonati,Anupa Kelkar,Chris Dick,Eduardo Baena,Josep M. Jornet,Tommaso Melodia,Michele Polese,Dimitrios Koutsonikolas

2024-06-23

Abstract:As Fifth generation (5G) cellular systems transition to softwarized, programmable, and intelligent networks, it becomes fundamental to enable public and private 5G deployments that are (i) primarily based on software components while (ii) maintaining or exceeding the performance of traditional monolithic systems and (iii) enabling programmability through bespoke configurations and optimized deployments. This requires hardware acceleration to scale the Physical (PHY) layer performance, programmable elements in the Radio Access Network (RAN) and intelligent controllers at the edge, careful planning of the Radio Frequency (RF) environment, as well as end-to-end integration and testing. In this paper, we describe how we developed the programmable X5G testbed, addressing these challenges through the deployment of the first 8-node network based on the integration of NVIDIA Aerial RAN CoLab (ARC), OpenAirInterface (OAI), and a near-real-time RAN Intelligent Controller (RIC). The Aerial Software Development Kit (SDK) provides the PHY layer, accelerated on Graphics Processing Unit (GPU), with the higher layers from the OAI open-source project interfaced with the PHY through the Small Cell Forum (SCF) Functional Application Platform Interface (FAPI). An E2 agent provides connectivity to the O-RAN Software Community (OSC) near-real-time RIC. We discuss software integration, the network infrastructure, and a digital twin framework for RF planning. We then profile the performance with up to 4 Commercial Off-the-Shelf (COTS) smartphones for each base station with iPerf and video streaming applications, measuring a cell rate higher than 500 Mbps in downlink and 45 Mbps in uplink.

Networking and Internet Architecture
Prototyping Next-Generation O-RAN Research Testbeds with SDRs

Pratheek S. Upadhyaya,Aly S. Abdalla,Vuk Marojevic,Jeffrey H. Reed,Vijay K. Shah

DOI: https://doi.org/10.48550/arXiv.2205.13178

2022-05-26

Abstract:Open RAN (O-RAN) defines an emerging cellular radio access network (RAN) architecture for future 6G wireless networks, emphasizing openness and intelligence which are considered the foundations of future 6G wireless networks. While the inherent complexity and flexibility of the RAN give rise to many new research problems, progress in developing solutions is hampered due to the lack of end-to-end, fully developed platforms that can help in pursuing use cases in realistic environments. This has motivated the formation of open-source frameworks available to the wireless community. However, the rapid evolution of dedicated platforms and solutions utilizing various software-based technologies often leaves questions regarding the interoperability and interactions between the components in the framework. This article shows how to build a software-defined radio testbed featuring an open-source 5G system that can interact with the near-real-time (near-RT) RAN intelligent controller (RIC) of the O-RAN architecture through standard interfaces. We focus on the O-RAN E2 interface interactions and outline the procedure to enable a RAN system with E2 capabilities. We demonstrate the working of two xApps on the testbed with detailed E2 message exchange procedures and their role in controlling next-generation RANs.

Networking and Internet Architecture,Distributed, Parallel, and Cluster Computing
Open Source-based Over-The-Air 5G New Radio Sidelink Testbed

Melissa Elkadi,Doekseong Kim,Ejaz Ahmed,Moein Sadeghi,Anh Le,Paul Russell,Bo Ryu

2023-10-07

Abstract:The focus of this paper is to demonstrate an over-the-air (OTA) 5G new radio (NR) sidelink communication prototype. 5G NR sidelink communications allow NR UEs to transfer data independently without the assistance of a base station (gNB), which enables V2X communications, including platooning, autonomous driving, sensor extension, industrial IoT, public safety communication and much more. Our design leverages the open-source OpenAirInterface5G (OAI) software, which operates on software-defined radios (SDRs) and can be easily extended for mesh networking. The software includes all signal processing components specified by the 3GPP 5G sidelink standards, including Low-Density Parity Check (LDPC) encoding/decoding, polar encoding/decoding, data and control multiplexing, modulation/demodulation, and orthogonal frequency-division multiplexing (OFDM) modulation/demodulation. It can be configured to operate with different bands, bandwidths, and antenna settings. The first milestone in this work was to demonstrate the completed Physical Sidelink Broadcast Channel (PSBCH) development, which conducts synchronization between a Synchronization Reference (SyncRef) UE and a nearby UE. The SyncRef UE broadcasts a sidelink synchronization signal block (S-SSB) periodically, which the nearby UE detects and uses to synchronize its timing and frequency components with the SyncRef UE. Once a connection is established, the next developmental milestone is to transmit real data (text messages) via the Physical Sidelink Shared Channel (PSSCH). Our PHY sidelink framework is tested using both an RF simulator and an OTA testbed with multiple nearby UEs. Beyond the development of synchronization and data transmission/reception in 5G sidelink, we conclude with various performance tests and validation experiments. The results of these metrics show that our simulator is comparable to the OTA testbed.

Networking and Internet Architecture,Signal Processing
Performance Evaluation of an Open Source Implementation of a 5G Standalone Platform

Jan Erik Håkegård,Henrik Lundkvist,Ashish Rauniyar,Peter Morris

DOI: https://doi.org/10.1109/access.2024.3367120

IF: 3.9

2024-02-28

IEEE Access

Abstract:Fifth-generation (5G) mobile communication systems are currently implemented worldwide. Moreover, the diversity between different deployments is growing, from operator-deployed macro networks to local private networks. The 5G system is very flexible with a large number of parameters and configurations impacting platform performance. With the availability of private spectrum and open-source software, there is an increasing possibility to get insight into what performance can be achieved in different dimensions, and how it depends on the configuration of various parameters, through experiments and testing. This paper presents a detailed account of a 5G Standalone (SA) platform based on the open5GS and srsRAN software suites installed on a general-purpose workstation. The performance of the platform is measured and compared to theoretical results and information from the 3GPP standardisation documentation. While some aspects of the performance are close to the theoretical expectations, others are further away. The software-defined radio (SDR) platform and the lack of hardware acceleration are probably the main limiting factors on coverage, uplink throughput and latency. The paper goes through several radio parameters and their impact on performance and discusses the performance implications and limitations of the experimental platform to share the lessons learned.

computer science, information systems,telecommunications,engineering, electrical & electronic
A comprehensive study on the synchronization procedure in 5G NR with 3GPP-compliant link-level simulator

Riccardo Tuninato,Daniel Gaetano Riviello,Roberto Garello,Bruno Melis,Roberto Fantini

DOI: https://doi.org/10.1186/s13638-023-02317-5

2023-10-29

EURASIP Journal on Wireless Communications and Networking

Abstract:The 5G New Radio synchronization procedure is the first step that the user must complete to access the mobile network. It mainly consists of the detection of the primary and secondary synchronization signals (PSS and SSS, respectively) and the decoding of the physical broadcast channel (PBCH). Our goal is to provide a comprehensive study of the synchronization procedure and investigate different techniques and approaches, through the implementation of a 5G New Radio-compliant simulator. Of significant interest is the investigation of impairments such as the fading channel, the frequency offset, and the delay spread. The results are provided in terms of detection probability for the PSS and SSS detection, and in terms of block error rate for the PBCH. From the data collected, there is evidence that choosing M-sequences for the PSS leads to an appreciably robust solution against frequency offset. The structure of the Gold sequences for SSS generation can be exploited to reduce the detection complexity, and different approaches can be chosen to improve reliability against delay spread. Moreover, the polar coding for 5G PBCH outperforms the former 4G coding technique, but they are still sensible to frequency offset. Finally, the simulator functionalities are validated through real captures of 5G signals.

telecommunications,engineering, electrical & electronic
Performance Analysis of a 5G Transceiver Implementation for Remote Areas Scenarios

Wheberth Dias,Danilo Gaspar,Luciano Mendes,Marwa Chafii,Maximilian Matthé,Peter Neuhaus,Gerhard Fettweis

DOI: https://doi.org/10.1109/EuCNC.2018.8443268

2019-05-02

Abstract:The fifth generation of mobile communication networks will support a large set of new services and applications. One important use case is the remote area coverage for broadband Internet access. This use case ha significant social and economic impact, since a considerable percentage of the global population living in low populated area does not have Internet access and the communication infrastructure in rural areas can be used to improve agribusiness productivity. The aim of this paper is to analyze the performance of a 5G for Remote Areas transceiver, implemented on field programmable gate array based hardware for real-time processing. This transceiver employs the latest digital communication techniques, such as generalized frequency division multiplexing waveform combined with 2 by 2 multiple-input multiple-output diversity scheme and polar channel coding. The performance of the prototype is evaluated regarding its out-of-band emissions and bit error rate under AWGN channel.

Signal Processing
6G Radio Testbeds: Requirements, Trends, and Approaches

Gilles Callebaut,Liang Liu,Thomas Eriksson,Liesbet Van der Perre,Ove Edfors,Christian Fager

2023-09-13

Abstract:The proof of the pudding is in the eating - that is why 6G testbeds are essential in the progress towards the next generation of wireless networks. Theoretical research towards 6G wireless networks is proposing advanced technologies to serve new applications and drastically improve the energy performance of the network. Testbeds are indispensable to validate these new technologies under more realistic conditions. This paper clarifies the requirements for 6G radio testbeds, reveals trends, and introduces approaches towards their development.

Signal Processing
Design of a Scalable 4G Portable Network Using Low Cost SDR And Raspberry Pi

Nupur Choudhury,Chinmoy Kalita,Kandarpa Kumar Sarma

DOI: https://doi.org/10.37394/23204.2021.20.15

2021-10-16

Abstract:Of late, Software Defined Radio (SDR) approach has become an effective means to design high data rate wireless systems for a range of applications. There are methods with which low cost SDR based 4th generation (4G) or long term evolution (LTE) systems can be designed. Using low cost Raspberry Pi systems, the SDR aided 4G systems can be designed for high data rate communication. The work is related to the design of a 4G wireless system using low cost SDR solutions and integrated to a programmable controller based on a Raspberry Pi. Experimental results show that the system is effective in a range of conditions.

Networking and Internet Architecture
Small-Scale Testbed for Evaluating C-V2X Applications on 5G Cellular Networks

Kaj Munhoz Arfvidsson,Kleio Fragkedaki,Frank J. Jiang,Vandana Narri,Hans-Cristian Lindh,Karl H. Johansson,Jonas Mårtensson

2024-05-10

Abstract:In this work, we present a small-scale testbed for evaluating the real-life performance of cellular V2X (C-V2X) applications on 5G cellular networks. Despite the growing interest and rapid technology development for V2X applications, researchers still struggle to prototype V2X applications with real wireless networks, hardware, and software in the loop in a controlled environment. To help alleviate this challenge, we present a testbed designed to accelerate development and evaluation of C-V2X applications on 5G cellular networks. By including a small-scale vehicle platform into the testbed design, we significantly reduce the time and effort required to test new C-V2X applications on 5G cellular networks. With a focus around the integration of small-scale vehicle platforms, we detail the design decisions behind the full software and hardware setup of commonly needed intelligent transport system agents (e.g. sensors, servers, vehicles). Moreover, to showcase the testbed's capability to produce industrially-relevant, real world performance evaluations, we present an evaluation of a simple test case inspired from shared situational awareness. Finally, we discuss the upcoming use of the testbed for evaluating 5G cellular network-based shared situational awareness and other C-V2X applications.

Systems and Control,Emerging Technologies,Networking and Internet Architecture
Experimental assessment of SDR-based 5G positioning: methodologies and insights

Ivan Palamà,Stefania Bartoletti,Giuseppe Bianchi,Nicola Blefari Melazzi

DOI: https://doi.org/10.1007/s12243-023-00987-2

2023-09-16

Annals of Telecommunications

Abstract:While GPS has traditionally been the primary positioning technology, 3GPP has more recently begun to include positioning services as native, built-in features of future-generation cellular networks. With Release 16 of the 3GPP, finalized in 2021, a significant standardization effort has taken place for positioning in 5G networks, especially in terms of physical layer signals, measurements, schemes, and architecture to meet the requirements of a wide range of regulatory, commercial and industrial use cases. However, experimentally driven research aiming to assess the real-world performance of 5G positioning is still lagging behind, root causes being (i) the slow integration of positioning technologies in open-source 5G frameworks, (ii) the complexity in setting up and properly configuring a 5G positioning testbed, and (iii) the cost of a multi-BS deployment. This paper sheds some light on all such aspects. After a brief overview of state of the art in 5G positioning and its support in open-source platforms based on software-defined radios (SDRs), we provide advice on how to set up positioning testbeds, and we demonstrate, via a set of real-world measurements, how to assess aspects such as reference signal configurations, localization algorithms, and network deployments. Our contribution further includes an assessment of the efficacy of utilizing measurements obtained from a single-link limited-size testbed to forecast localization performance in more elaborate (and hence more expensive) multi-node network settings. We posit that our methodological insights can assist in lowering the entry cost barriers associated with conducting 5G positioning experiments and, consequently, promote additional experimental research in this domain.

telecommunications
Poster Abstract: Enabling Concurrent Iot Transmissions In Distributed C-Ran

Xiaoran Fan,Zhenzhou Qi,Zhenhua Jia,Yanyong Zhang

DOI: https://doi.org/10.1145/3274783.3275197

2018-01-01

Abstract:As rapid expansion of the low-cost next billion devices, wireless sensor networks (WSN) undertake much denser low-end internet of things (IoT) nodes nowadays. In the meantime, the future next 5 generation (5G) radio base stations (BS) are granted more capabilities. Distributed cloud radio access network (C-RAN) is becoming available for the future massive WSN. However, real-world distributed C-RAN is less explored for low-end IoT based WSN due to its difficulties in implementation. In this paper, we built a distributed C-RAN which has tens of distributed radio frontends using USRP N210s in a 20 x 20 x 3 m(3) area. By exploiting the inherent hardware properties of low-end IoT devices and the spatial diversity of distributed C-RAN system, we show the distributed C-RAN can potentially decode collided signals from low-end IoT devices with all signal processing been done on the cloud.
Building a real-time physical layer labeled data logging facility for 6G research

Franco Minucci,Raquel Marina Noguera Oishi,Haoqiu Xiong,Dieter Verbruggen,Cel Thys,Rizqi Hersyandika,Robbert Beerten,Achiel Colpaert,Vida Ranjbar,Sofie Pollin

2024-10-02

Abstract:This work describes the architecture and vision of designing and implementing a new test infrastructure for 6G physical layer research at KU Leuven. The Testbed is designed for physical layer research and experimentation following several emerging trends, such as cell-free networking, integrated communication, sensing, open disaggregated Radio Access Networks, AI-Native design, and multiband operation. The software is almost entirely based on free and open-source software, making contributing and reusing any component easy. The open Testbed is designed to provide real-time and labeled data on all parts of the physical layer, from raw IQ data to synchronization statistics, channel state information, or symbol/bit/packet error rates. Real-time labeled datasets can be collected by synchronizing the physical layer data logging with a positioning and motion capture system. One of the main goals of the design is to make it open and accessible to external users remotely. Most tests and data captures can easily be automated, and experiment code can be remotely deployed using standard containers (e.g., Docker or Podman). Finally, the paper describes how the Testbed can be used for our research on joint communication and sensing, over-the-air synchronization, distributed processing, and AI in the loop.

Networking and Internet Architecture,Signal Processing
A Calibrated and Automated Simulator for Innovations in 5G

Conrado Boeira,Antor Hasan,Khaleda Papry,Yue Ju,Zhongwen Zhu,Israat Haque

2024-04-16

Abstract:The rise of 5G deployments has created the environment for many emerging technologies to flourish. Self-driving vehicles, Augmented and Virtual Reality, and remote operations are examples of applications that leverage 5G networks' support for extremely low latency, high bandwidth, and increased throughput. However, the complex architecture of 5G hinders innovation due to the lack of accessibility to testbeds or realistic simulators with adequate 5G functionalities. Also, configuring and managing simulators are complex and time consuming. Finally, the lack of adequate representative data hinders the data-driven designs in 5G campaigns. Thus, we calibrated a system-level open-source simulator, Simu5G, following 3GPP guidelines to enable faster innovation in the 5G domain. Furthermore, we developed an API for automatic simulator configuration without knowing the underlying architectural details. Finally, we demonstrate the usage of the calibrated and automated simulator by developing an ML-based anomaly detection in a 5G Radio Access Network (RAN).

Networking and Internet Architecture,Signal Processing
Testbed as a RegUlatory Science Tool (TRUST): A Testbed Design for Evaluating 5G-Enabled Medical Devices

Yongkang Liu,Mohamad Omar Al Kalaa

DOI: https://doi.org/10.1109/access.2023.3299242

IF: 3.9

2023-08-09

IEEE Access

Abstract:The fifth-generation (5G) cellular communication technology introduces technical advances that can expand medical device access to connectivity services. However, assessing the safety and effectiveness of emerging 5G-enabled medical devices is challenging as relevant evaluation methods have not yet been established. In this paper, we propose a design model for 5G testbed as a regulatory science tool (TRUST) for assessing 5G connectivity enablers of medical device functions. Specifically, we first identify application specific testing needs and general testing protocols. Next, we outline the selection and customization of key system components to create a 5G testbed. A TRUST demonstration is documented through a realistic 5G testbed implementation along with the deployment of a custom-built example use-case for 5G-enabled medical extended reality (MXR). Detailed configurations, example collected data, and implementation challenges are presented. The openness of the TRUST design model allows a TRUST testbed to be easily extended and customized to incorporate available resources and address the evaluation needs of different stakeholders.

computer science, information systems,telecommunications,engineering, electrical & electronic

Isolation of 17-alpha-estradiol 17-beta-D-glucopyranoside from rabbit urine, and its synthesis and characterization.

LinkLab: A Scalable and Heterogeneous Testbed for Remotely Developing and Experimenting IoT Applications

An Open, Programmable, Multi-vendor 5G O-RAN Testbed with NVIDIA ARC and OpenAirInterface

Performance Analysis and Comparison of Full-Fledged 5G Standalone Experimental TDD Testbeds in Single & Multi-UE Scenarios

Fully reconfigurable cognitive OFDMA testbed

A Modular, End-to-End Next-Generation Network Testbed: Towards a Fully Automated Network Management Platform

X5G: An Open, Programmable, Multi-vendor, End-to-end, Private 5G O-RAN Testbed with NVIDIA ARC and OpenAirInterface

Prototyping Next-Generation O-RAN Research Testbeds with SDRs

Open Source-based Over-The-Air 5G New Radio Sidelink Testbed

Performance Evaluation of an Open Source Implementation of a 5G Standalone Platform

A comprehensive study on the synchronization procedure in 5G NR with 3GPP-compliant link-level simulator

Performance Analysis of a 5G Transceiver Implementation for Remote Areas Scenarios

6G Radio Testbeds: Requirements, Trends, and Approaches

Design of a Scalable 4G Portable Network Using Low Cost SDR And Raspberry Pi

Small-Scale Testbed for Evaluating C-V2X Applications on 5G Cellular Networks

Experimental assessment of SDR-based 5G positioning: methodologies and insights

Poster Abstract: Enabling Concurrent Iot Transmissions In Distributed C-Ran

Building a real-time physical layer labeled data logging facility for 6G research

A Calibrated and Automated Simulator for Innovations in 5G

Testbed as a RegUlatory Science Tool (TRUST): A Testbed Design for Evaluating 5G-Enabled Medical Devices