Abstract:Developing transition metal-based electrode materials with high charge storage ability and excellent cycle life is a substantial challenge for supercapacitor applications. This report demonstrates an improved specific capacitance and excellent cycling stability for a Ni/Co-hydroxide-(oxy)hydroxide electrode material obtained from the electrochemical reconstruction of a Ni/Co-pyrophosphate precursor. Herein, we have prepared a series of nickel/cobalt pyrophosphate (Ni x Co 100− x 600) ( x = 90, 80, 70, 60, 50, 0) materials through a simple co-precipitation method followed by thermal annealing. Upon electrochemical treatment, the developed nickel/cobalt pyrophosphate materials were transformed into porous Ni/Co-hydroxide-(oxy)hydroxides. This is due to the etching of pyrophosphate anions with electrochemical cycling, confirmed by rigorous physical characterization. Among them, Ni-rich electrodes showed higher specific capacitance values due to the dominant intercalation redox behavior (battery-type storage), yet they suffer from poor cycle stability. In contrast, Co-rich electrodes display low specific capacitance and excellent capacitance retention as the charge storage mainly occurs through surface redox processes. Interestingly, the incorporation of an adequate amount of cobalt into the nickel system has dramatically improved the charge storage ability as well as cycling stability owing to the synergistic effect between Ni and Co redox centers and the balanced charge storage phenomenon contributed by both the surface and intercalation redox processes. Especially, the material developed from Ni 60 Co 40 600 has exhibited a maximum specific capacitance of 566 F g −1 at 1 A g −1 current density and achieved an excellent capacitance retention of 84% (∼99% coulombic efficiency) up to 10 000 cycles. Further, the corresponding hybrid device (Ni 60 Co 40 600//AC) has displayed an operational voltage window of 1.6 V and achieved a maximum energy density of 14.9 W h kg −1 at 794.5 W kg −1 power density and could retain ∼86% of its initial capacity even after 25 000 cycles, thereby indicating the suitability of the electrode for practical applications.

Zincronization-induced surface modification of Co Mn phosphate for improved electrochemical performance in battery-supercapacitor hybrid systems

Enhanced electrochemical performance of battery‐grade cobalt phosphate via magnetron sputtered copper interfacial layer for potential supercapattery applications

Outstanding electrochemical performance of nickel-cobalt phosphate sheets with abundant mesopores for use in aqueous asymmetric supercapacitors and Ni–Zn batteries

Synergistic redox enhancement: silver phosphate augmentation for optimizing magnesium copper phosphate in efficient energy storage devices and oxygen evolution reaction

Inhibition of Redox Behaviors in Hierarchically Structured Manganese Cobalt Phosphate Supercapacitor Performance by Surface Trivalent Cations

Phosphorus-Mediated Local Charge Distribution of N-Configuration Adsorption Sites with Enhanced Zincophilicity and Hydrophilicity for High-Energy-Density Zn-Ion Hybrid Supercapacitors

Unlocking the synergetic potential of cobalt iron phosphate and multiwalled carbon nanotube composites towards supercapacitor application

Phosphate Species up to 70% Mass Ratio for Enhanced Pseudocapacitive Properties.

Anion and Cation Substitution in Transition-Metal Oxides Nanosheets for High-Performance Hybrid Supercapacitors

Enhanced the electrochemical performance of CoMgS nanocomposite electrode with the doping of ZnO for supercapacitor-battery hybrid device and photochemical activity

Zn-Co phosphide porous nanosheets derived from metal-organic-frameworks as battery-type positive electrodes for high-performance alkaline supercapacitors

Phosphate Ions Functionalized Spinel Iron Cobaltite Derived from Metal Organic Framework Gel for High-Performance Asymmetric Supercapacitors.

Exploring The Potency of EDTA-Based Ni-Co-MOF Nanospheres for Highly Durable Battery-Supercapacitor Hybrids

Designing of a High Performance NiMgPO4/CNT Electrode Material for a Battery-Supercapacitor Hybrid Device

Electrochemical surface reconstruction of nickel cobalt pyrophosphate to Ni/Co-hydroxide-(oxy)hydroxide: an efficient and highly durable battery-type supercapacitor electrode material

Zinc Ions Doping in Layered Bimetallic Nickel‐Cobalt Glycerol Nanosheets for Enhanced Electrochemical Performance of Supercapacitors

Phosphorus incorporation-induced adsorption behavior modulation for carbon cathodes enables ultrastable and high-energy aqueous Zn-ion hybrid capacitors

Phosphate ion-functionalized nickel-cobalt layered double hydroxide nanosheets derived from metal-organic framework compounds for high-performance asymmetric supercapacitors

A New Approach in Surface Modification of Manganese Based Cathode Materials for Enhanced Performance in Zinc Aqueous Batteries

Unleashing the Full Potential of Electrochromic Heterostructured Nickel-Cobalt Phosphate for Optically Active High-Performance Asymmetric Quasi-Solid-State Supercapacitor Devices

Electroactivated Modulation of Highly Aligned Manganese-Doped Cobalt Sulfide Nanoplate Arrays for High-Performance Hybrid Supercapacitors