Interleukin-8 neutralization for COPD.

Ken-ichiro Inoue,H. Takano,R. Yanagisawa,T. Yoshikawa

DOI: https://doi.org/10.1378/CHEST.128.1.464

IF: 9.6

2005-07-01

Chest

Abstract:

What problem does this paper attempt to address?

Millimeter wave‐based patient setup verification and motion tracking during radiotherapy

Max Bressler,Jingxuan Zhu,Joshua Olick‐Gibson,Jonathan Haefner,Shuang Zhou,Qinghao Chen,Thomas Mazur,Yao Hao,Paul Carter,Tiezhi Zhang

DOI: https://doi.org/10.1002/mp.17019

IF: 4.506

2024-03-10

Medical Physics

Abstract:Background Position verification and motion monitoring are critical for safe and precise radiotherapy (RT). Existing approaches to these tasks based on visible light or x‐ray are suboptimal either because they cannot penetrate obstructions to the patient's skin or introduce additional radiation exposure. The low‐cost mmWave radar is an ideal solution for these tasks as it can monitor patient position and motion continuously throughout the treatment delivery. Purpose To develop and validate frequency‐modulated continuous wave (FMCW) mmWave radars for position verification and motion tracking during RT delivery. Methods A 77 GHz FMCW mmWave module was used in this study. Chirp Z Transform‐based (CZT) algorithm was developed to process the intermediate frequency (IF) signals. Absolute distances to flat Solid Water slabs and human shape phantoms were measured. The accuracy of absolute distance and relative displacement were evaluated. Results Without obstruction, mmWave based on the CZT algorithm was able to detect absolute distance within 1 mm for a Solid Water slab that simulated the reflectivity of the human body. Through obstructive materials, the mmWave device was able to detect absolute distance within 5 mm in the worst case and within 3.5 mm in most cases. The CZT algorithm significantly improved the accuracy of absolute distance measurement compared with Fast Fourier Transform (FFT) algorithm and was able to achieve submillimeter displacement accuracy with and without obstructions. The surface‐to‐skin distance (SSD) measurement accuracy was within 8 mm in the anterior of the phantom. Conclusions With the CZT signal processing algorithm, the mmWave radar is able to measure the absolute distance to a flat surface within 1 mm. But the absolute distance measurement to a human shape phantom is as large as 8 mm at some angles. Further improvement is necessary to improve the accuracy of SSD measurement to uneven surfaces by the mmWave radar.

radiology, nuclear medicine & medical imaging
Toward submillimeter accuracy in the management of intrafraction motion: the integration of real-time internal position monitoring and multileaf collimator target tracking

Amit Sawant,Ryan L Smith,Raghu B Venkat,Lakshmi Santanam,Byungchul Cho,Per Poulsen,Herbert Cattell,Laurence J Newell,Parag Parikh,Paul J Keall

DOI: https://doi.org/10.1016/j.ijrobp.2008.12.057

2009-06-01

Abstract:Purpose: We report on an integrated system for real-time adaptive radiation delivery to moving tumors. The system combines two promising technologies-three-dimensional internal position monitoring using implanted electromagnetically excitable transponders and corresponding real-time beam adaptation using a dynamic multileaf collimator (DMLC). Methods and materials: In a multi-institutional academic and industrial collaboration, a research version of the Calypso position monitoring system was integrated with a DMLC-based four-dimensional intensity-modulated radiotherapy delivery system using a Varian 120-leaf multileaf collimator (MLC). Two important determinants of system performance-latency (i.e., elapsed time between target motion and MLC response) and geometric accuracy-were investigated. Latency was quantified by acquiring continuous megavoltage X-ray images of a moving phantom (with embedded transponders) that was tracked in real time by a circular MLC field. The latency value was input into a motion prediction algorithm within the DMLC tracking system. Geometric accuracy was calculated as the root-mean-square positional error between the target and the centroid of the MLC aperture for patient-derived three-dimensional motion trajectories comprising two lung tumor traces and one prostate trace. Results: System latency was determined to be approximately 220 milliseconds. Tracking accuracy was observed to be sub-2 mm for the respiratory motion traces and sub-1 mm for prostate motion. Conclusion: We have developed and characterized a research version of a novel four-dimensional delivery system that integrates nonionizing radiation-based internal position monitoring and accurate real-time DMLC-based beam adaptation. This system represents a significant step toward achieving the eventual goal of geometrically ideal dose delivery to moving tumors.
Nephropathy in a Hypercholesterolemic Mouse Model with Streptozotocin-Induced Diabetes

S. Hammad,D. Hazen‐Martin,M. Sohn,Leslie Eldridge,L. Powell-Braxton,Wesley B. Won,T. Lyons

DOI: https://doi.org/10.1159/000073942

2003-11-19

Kidney & Blood Pressure Research

Abstract:Background/Aims: The contribution of preexisting hypercholesterolemia to diabetic nephropathy remains unclear. We assessed the impact of hypercholesterolemia on diabetic nephropathy using a double knockout (DKO) mouse, null for the low-density lipoprotein receptor (Ldlr–/–) and the apoB mRNA editing catalytic polypeptide 1 (Apobec1–/–). Methods: Wild-type (WT) and DKO mice received sham or streptozotocin injections at age 7 weeks, yielding control (WT-C, DKO-C) and diabetic (WT-D, DKO-D) groups. At sacrifice (age 40 weeks), albuminuria was determined by ELISA, and kidney sections were examined by light and electron microscopy. Results: Albuminuria increased in diabetic mice (WT-D: 82.4 ± 37.2 µg/18 h; DKO-D: 58.0 ± 45.7 µg/18 h) versusnondiabetic controls (WT-C: 10.2 ± 7.2 µg/18 h; DKO-C: 8.6 ± 5.3 µg/18 h) (p < 0.0001), but was unaffected by hypercholesterolemia. Light microscopy of kidney sections demonstrated increased collagen levels in glomeruli in WT-D mice, but not in DKO-D mice or either control group. Electron microscopy showed a thickened glomerular basement membrane in WT-D mice only. The proximal tubular basement membrane thickness was increased in both diabetic groups versusnondiabetic controls (p < 0.01); in WT-D mice this was attributable to collagen accumulation, but in DKO-D mice it was mainly caused by lipid vacuoles. Conclusions: In this animal model, preexisting hypercholesterolemia did not exacerbate either glomerular lesions of diabetes (collagen accumulation, basement membrane thickening) or albuminuria, but appeared to mitigate these effects. Furthermore, the combination of hypercholesterolemia and diabetes resulted in a significant lipid accumulation in the tubular basement membrane.
Simultaneous Motion Monitoring and Truth-In-Delivery Analysis Imaging Framework for MR-guided Radiotherapy

Nikolai J. Mickevicius,Xinfeng Chen,Zachary Boyd,Hannah J. Lee,Geoffrey S. Ibbott,Eric S. Paulson

DOI: https://doi.org/10.1088/1361-6560/aaec91

2018-06-20

Abstract:Intrafraction motion can play a pivotal role in the success of abdominal and thoracic radiation therapy. Hybrid magnetic resonance-guided radiotherapy systems have the potential to control for intrafraction motion. Recently, we introduced an MRI sequence capable of acquiring real-time cine imaging in two orthogonal planes (SOPI). We extend SOPI here to permit dynamic updating of slice positions in one plane while keeping the other plane position fixed. In this implementation, cine images from the static plane are used for motion monitoring and as image navigators to sort stepped images in the other plane, producing dynamic 4D image volumes for use in dose reconstruction. A custom 3D-printed target filled with radiochromic FXG gel was interfaced to a dynamic motion phantom. 4D-SOPI was acquired in a dynamic motion phantom driven by an actual patient respiratory waveform displaying amplitude/frequency variations and drifting and in a healthy volunteer. Unique 4D-MRI epochs were reconstructed from a time series of phantom motion. Dose from a static 4cmx15cm field was calculated on each 4D respiratory phase bin and epoch image, scaled by the time spent in each bin, and then rigidly accumulated. The phantom was then positioned on an Elekta MR Linac and irradiated while moving. Following irradiation, actual dose deposited to the FXG gel was determined by applying a R1 versus dose calibration curve to R1 maps of the phantom. The 4D-SOPI cine images produced a respiratory motion navigator that was highly correlated with the actual phantom motion (CC=0.9981). The mean difference between the accumulated and measured dose inside the target was 4.4% of the maximum prescribed dose. These results provide early validation that 4D-SOPI simultaneously enables real-time motion monitoring and truth-in-delivery analysis for integrated MR-guided radiation therapy (MR-gRT) systems.

Medical Physics
Real-time intrafraction motion monitoring in external beam radiotherapy

Jenny Bertholet,Antje Knopf,Björn Eiben,Jamie McClelland,Alexander Grimwood,Emma Harris,Martin Menten,Per Poulsen,Doan Trang Nguyen,Paul Keall,Uwe Oelfke

DOI: https://doi.org/10.1088/1361-6560/ab2ba8

IF: 3.5

2019-08-01

Physics in Medicine and Biology

Abstract:Abstract Radiotherapy (RT) aims to deliver a spatially conformal dose of radiation to tumours while maximizing the dose sparing to healthy tissues. However, the internal patient anatomy is constantly moving due to respiratory, cardiac, gastrointestinal and urinary activity. The long term goal of the RT community to ‘see what we treat, as we treat’ and to act on this information instantaneously has resulted in rapid technological innovation. Specialized treatment machines, such as robotic or gimbal-steered linear accelerators (linac) with in-room imaging suites, have been developed specifically for real-time treatment adaptation. Additional equipment, such as stereoscopic kilovoltage (kV) imaging, ultrasound transducers and electromagnetic transponders, has been developed for intrafraction motion monitoring on conventional linacs. Magnetic resonance imaging (MRI) has been integrated with cobalt treatment units and more recently with linacs. In addition to hardware innovation, software development has played a substantial role in the development of motion monitoring methods based on respiratory motion surrogates and planar kV or Megavoltage (MV) imaging that is available on standard equipped linacs. In this paper, we review and compare the different intrafraction motion monitoring methods proposed in the literature and demonstrated in real-time on clinical data as well as their possible future developments. We then discuss general considerations on validation and quality assurance for clinical implementation. Besides photon RT, particle therapy is increasingly used to treat moving targets. However, transferring motion monitoring technologies from linacs to particle beam lines presents substantial challenges. Lessons learned from the implementation of real-time intrafraction monitoring for photon RT will be used as a basis to discuss the implementation of these methods for particle RT.

engineering, biomedical,radiology, nuclear medicine & medical imaging
First experimental measurement of the effect of cardio-synchronous brain motion on the dose distribution during microbeam radiation therapy

Mitchell Duncan,Mattia Donzelli,Paolo Pellicioli,Elke Brauer-Krisch,Jeremy A Davis,Michael L F Lerch,Anatoly B Rosenfeld,Marco Petasecca

DOI: https://doi.org/10.1002/mp.13899

Abstract:Purpose: Microbeam radiation therapy (MRT) is an emerging radiation oncology modality ideal for treating inoperable brain tumors. MRT employs quasi-parallel beams of low-energy x rays produced from modern synchrotrons. A tungsten carbide multislit collimator (MSC) spatially fractionates the broad beam into rectangular beams. In this study, the MSC creates beams 50 μm wide ("peaks") separated by a center-to-center distance of 400 μm ("valleys"). The peak to valley dose ratio (PVDR) is of critical importance to the efficacy of MRT. The underlying radiobiological advantage of MRT relies on high peak dose for tumor control and low valley dose for healthy tissue sparing. Cardio synchronous brain motion of the order 100-200 μm is comparable to microbeam width and spacing. The motion can have a detrimental effect on the PVDR, full width at half maximum (FWHM) of the microbeams, and ultimately the dose distribution. We present the first experimental measurement of the effect of brain motion on MRT dose distribution. Dosimetry in MRT is difficult due to the high dose rate (up to 15-20 kGy/s) and small field sizes. Methods: A real-time dosimetry system based on a single silicon strip detector (SSSD) has been developed with spatial resolution ~10 μm. The SSSD was placed in a water-equivalent phantom and scanned through the microbeam distribution. A monodirectional positioning stage reproduced brain motion during the acquisition. Microbeam profiles were reconstructed from the SSSD and compared with Geant4 simulation and radiochromic HD-V2 film. Results: The SSSD is able to reconstruct dose profiles within 2 μm compared to film. When brain motion is applied the SSSD shows a two time increase in FWHM of profiles and 50% reduction in PVDR. This is confirmed by Geant4 and film data. Conclusions: Motion-induced misalignment and distortion of microbeams at treatment delivery will result in a reduced PVDR and increased irradiation of additional healthy tissue compromising the radiobiological effectiveness of MRT. The SSSD was able to reconstruct dose profiles under motion conditions and predict similar effects on FWHM and PVDR as by the simulation. The SSSD is a simple to setup, real-time detector which can provide time-resolved high spatial resolution dosimetry of microbeams in MRT.
Results of Images Acquired with Backscattered Mv Radiation Using A Pinhole Collimator

D. Bernard,J. Turian,Z. Wu,N. Darwish,J. Chu

DOI: https://doi.org/10.1118/1.4888229

2014-01-01

Abstract:Purpose:To ascertain the feasibility of acquiring real time images of small lung tumors from scattered photons while undergoing radiation treatment. There are several methodologies currently used to track tumor location such as MV‐cine acquisition and kV fluoroscopy. However, MVcine offers no information parallel to the beam axis while kV fluoroscopy offers little potential for soft tissue discernability while also increasing the patient dose. This study investigates the feasibility of observing an actual simulated tumor while exploring techniques that may improve image quality.Methods:A prototype imager consisting of a gamma camera pinhole collimator and a computed radiography (CR) plate were used in conjunction with a Varian TrueBeam linac. One study consisted of a 2.5 cm diameter solid water cylinder representing a solid tumor imbedded within a lung equivalent material slab. The cylinder with the lung slab was sandwiched between 1 cm lung equivalent slabs and these were sandwiched between 2 slabs of solid water. The top water slab was 1 cm thick. The other imaging study consisted of three different density plugs, 0.46, 1.09, and 1.82 g/cm3 placed on the accelerator couch. The gantry was orientated 70° relative to the CR plate. The slabs and plugs were irradiated with 2000 MU and 500 MU respectively using the 6FFF mode.Results:The solid water plug was visually discernible in the slab phantom. The ratio of the signal coming from the higher density plugs (placed on the treatment couch) to that between the plugs increased from 1.02 to about 3.0 after subtracting the background image acquired with no plugs present.Conclusion:Preliminary results indicate that a lung tumor could be visualized with scattered radiation during treatment. Improvements in discerning an object can be enhanced by filtering out the head leakage and background scattered radiation not emanating from the imaged object.
Distortion-Free Diffusion MRI using an MRI-Guided Tri-Cobalt 60 Radiotherapy System: Sequence Verification and Preliminary Clinical Experience.

Yu Gao,Fei Han,Ziwu Zhou,Minsong Cao,Tania Kaprealian,Mitchell Kamrava,Chenyang Wang,John Neylon,Daniel A Low,Yingli Yang,Peng Hu

DOI: https://doi.org/10.1002/mp.12465

IF: 4.506

2017-01-01

Medical Physics

Abstract:Purpose: Monitoring tumor response during the course of treatment and adaptively modifying treatment plan based on tumor biological feedback may represent a new paradigm for radiotherapy. Diffusion MRI has shown great promises in assessing and predicting tumor response to radiotherapy. However, the conventional diffusion-weighted single-shot echo-planar-imaging (DW-ssEPI) technique suffers from limited resolution, severe distortion, and possibly inaccurate ADC at low field strength. The purpose of this work was to develop a reliable, accurate and distortion-free diffusion MRI technique that is practicable for longitudinal tumor response evaluation and adaptive radiotherapy on a 0.35 T MRI-guided radiotherapy system. Methods: A diffusion-prepared turbo spin echo readout (DP-TSE) sequence was developed and compared with the conventional diffusion-weighted single-shot echo-planar-imaging sequence on a 0.35 T MRI-guided radiotherapy system (ViewRay). A spatial integrity phantom was used to quantitate and compare the geometric accuracy of the two diffusion sequences for three orthogonal orientations. The apparent diffusion coefficient (ADC) accuracy was evaluated on a diffusion phantom under both 0 degrees C and room temperature to cover a diffusivity range between 0.40 x 10(-3) and 2.10 x 10(-3) mm(2)/s. Ten room temperature measurements repeated on five different days were conducted to assess the ADC reproducibility of DP-TSE. Two glioblastoma (GBM) and six sarcoma patients were included to examine the in vivo feasibility. The target registration error (TRE) was calculated to quantitate the geometric accuracy where structural CT or MR images were co-registered to the diffusion images as references. ADC maps from DP-TSE and DW-ssEPI were calculated and compared. A tube phantom was placed next to patients not treated on ViewRay, and ADCs of this reference tube were also compared. Results: The proposed DP-TSE passed the spatial integrity test (< 1 mm within 100 mm radius and < 2 mm within 175 mm radius) under the three orthogonal orientations. The detected errors were 0.474 0.355 mm, 0.475 +/- 0.287 mm, and 0.546 +/- 0.336 mm in the axial, coronal, and sagittal plane. DW-ssEPI, however, failed the tests due to severe distortion and low signal intensity. Noise correction must be performed for the DW-ssEPI to avoid ADC quantitation errors, whereas it is optional for DP-TSE. At 0 degrees C, the two sequences provided accurate quantitation with < 3% variation with the reference. In the room temperature study, discrepancies between ADCs from DP-TSE and the reference were within 4%, but could be as high as 8% for DW-ssEPI after the noise correction. Excellent ADC reproducibility with a coefficient of variation < 5% was observed among the 10 measurements of DP-TSE, indicating desirable robustness for ADC-based tumor response assessment. In vivo TRE in DP-TSE was less than 1.6 mm overall, whereas it could be greater than 12 mm in DW-ssEPI. For GBM patients, the CSF and brain tissue ADCs from DP-TSE were within the ranges found in literature. ADC differences between the two techniques were within 8% among the six sarcoma patients. For the reference tube that had a relatively low diffusivity, the two diffusion sequences provided matched measurements. Conclusion: A diffusion technique with excellent geometric fidelity, accurate, and reproducible ADC measurement was demonstrated for longitudinal tumor response assessment using a low-field MRI-guided radiotherapy system. (C) 2017 American Association of Physicists in Medicine
SU-E-J-61: Monitoring Tumor Motion in Real-Time with EPID Imaging During Cervical Cancer Treatment

W. Mao,B. Hrycushko,Y. Yan,R. Foster,K. Albuquerque

DOI: https://doi.org/10.1118/1.4924148

2015-01-01

Abstract:Purpose: Traditional external beam radiotherapy for cervical cancer requires setup by external skin marks. In order to improve treatment accuracy and reduce planning margin for more conformal therapy, it is essential to monitor tumor positions interfractionally and intrafractionally. We demonstrate feasibility of monitoring cervical tumor motion online using EPID imaging from Beam's Eye View. Methods: Prior to treatment, 1∼2 cylindrical radio opaque markers were implanted into inferior aspect of cervix tumor. During external beam treatments on a Varian 2100C by 4-field 3D plans, treatment beam images were acquired continuously by an EPID. A Matlab program was developed to locate internal markers on MV images. Based on 2D marker positions obtained from different treatment fields, their 3D positions were estimated for every treatment fraction. Results: There were 398 images acquired during different treatment fractions of three cervical cancer patients. Markers were successfully located on every frame of image at an analysis speed of about 1 second per frame. Intrafraction motions were evaluated by comparing marker positions relative to the position on the first frame of image. The maximum intrafraction motion of the markers was 1.6 mm. Interfraction motions were evaluated by comparing 3D marker positions at different treatment fractions. The maximum interfraction motion was up to 10 mm. Careful comparison found that this is due to patient positioning since the bony structures shifted with the markers. Conclusion: This method provides a cost-free and simple solution for online tumor tracking for cervical cancer treatment since it is feasible to acquire and export EPID images with fast analysis in real time. This method does not need any extra equipment or deliver extra dose to patients. The online tumor motion information will be very useful to reduce planning margins and improve treatment accuracy, which is particularly important for SBRT treatment with long delivery time.
Real-time intra-fraction motion management in breast cancer radiotherapy: analysis of 2028 treatment sessions

D. Reitz,G. Carl,S. Schönecker,M. Pazos,P. Freislederer,M. Niyazi,U. Ganswindt,F. Alongi,M. Reiner,C. Belka,S. Corradini

DOI: https://doi.org/10.1186/s13014-018-1072-4

IF: 4.309

2018-07-16

Radiation Oncology

Abstract:BackgroundIntra-fraction motion represents a crucial issue in the era of precise radiotherapy in several settings, including breast irradiation. To date, only few data exist on real-time measured intra-fraction motion in breast cancer patients. Continuous surface imaging using visible light offers the capability to monitor patient movements in three-dimensional space without any additional radiation exposure. The aim of the present study was to quantify the uncertainties of possible intra-fractional motion during breast radiotherapy.Material and methodsOne hundred and four consecutive patients that underwent postoperative radiotherapy following breast conserving surgery or mastectomy were prospectively evaluated during 2028 treatment sessions. During each treatment session the patients’ motion was continuously measured using the Catalyst™ optical surface scanner (C-RAD AB, Sweden) and compared to a reference scan acquired at the beginning of each session. The Catalyst system works through an optical surface imaging with light emitting diode (LED) light and reprojection captured by a charge coupled device (CCD) camera, which provide target position control during treatment delivery with a motion detection accuracy of 0.5 mm. For 3D surface reconstruction, the system uses a non-rigid body algorithm to calculate the distance between the surface and the isocentre and using the principle of optical triangulation. Three-dimensional deviations and relative position differences during the whole treatment fraction were calculated by the system and analyzed statistically.ResultsOverall, the maximum magnitude of the deviation vector showed a mean change of 1.93 mm ± 1.14 mm (standard deviation [SD]) (95%-confidence interval: [0.48–4.65] mm) and a median change of 1.63 mm during dose application (beam-on time only). Along the lateral and longitudinal axis changes were quite similar (0.18 mm ± 1.06 mm vs. 0.17 mm ± 1.32 mm), on the vertical axis the mean change was 0.68 mm ± 1.53 mm. The mean treatment session time was 154 ± 53 (SD) seconds and the mean beam-on time only was 55 ± 16 s. According to Friedman’s test differences in the distributions of the three possible directions (lateral, longitudinal and vertical) were significant (p < 0.01), in post-hoc analysis there were no similarities between any two of the three directions.ConclusionThe optical surface imaging system is an accurate and easy tool for real-time motion management in breast cancer radiotherapy. Intra-fraction motion was reported within five millimeters in all directions. Thus, intra-fraction motion in our series of 2028 treatment sessions seems to be of minor clinical relevance in postoperative radiotherapy of breast cancer.

oncology,radiology, nuclear medicine & medical imaging
Investigating the Feasibility of Rapid MRI for Image-Guided Motion Management in Lung Cancer Radiotherapy

Amit Sawant,Paul Keall,Kim Butts Pauly,Marcus Alley,Shreyas Vasanawala,Billy W. Loo,Jacob Hinkle,Sarang Joshi,Billy W. Loo Jr.

DOI: https://doi.org/10.1155/2014/485067

2014-01-01

BioMed Research International

Abstract:Cycle-to-cycle variations in respiratory motion can cause significant geometric and dosimetric errors in the administration of lung cancer radiation therapy. A common limitation of the current strategies for motion management is that they assume a constant, reproducible respiratory cycle. In this work, we investigate the feasibility of using rapid MRI for providing long-term imaging of the thorax in order to better capture cycle-to-cycle variations. Two nonsmall-cell lung cancer patients were imaged (free-breathing, no extrinsic contrast, and 1.5 T scanner). A balanced steady-state-free-precession (b-SSFP) sequence was used to acquire cine-2D and cine-3D (4D) images. In the case of Patient 1 (right midlobe lesion, ~40 mm diameter), tumor motion was well correlated with diaphragmatic motion. In the case of Patient 2, (left upper-lobe lesion, ~60 mm diameter), tumor motion was poorly correlated with diaphragmatic motion. Furthermore, the motion of the tumor centroid was poorly correlated with the motion of individual points on the tumor boundary, indicating significant rotation and/or deformation. These studies indicate that image quality and acquisition speed of cine-2D MRI were adequate for motion monitoring. However, significant improvements are required to achieve comparable speeds for truly 4D MRI. Despite several challenges, rapid MRI offers a feasible and attractive tool for noninvasive, long-term motion monitoring.

biotechnology & applied microbiology,medicine, research & experimental
Investigation of mmWave Radar Technology For Non-contact Vital Sign Monitoring

Steven Marty,Federico Pantanella,Andrea Ronco,Kanika Dheman,Michele Magno

DOI: https://doi.org/10.1109/MeMeA57477.2023.10171940

2023-09-15

Abstract:Non-contact vital sign monitoring has many advantages over conventional methods in being comfortable, unobtrusive and without any risk of spreading infection. The use of millimeter-wave (mmWave) radars is one of the most promising approaches that enable contact-less monitoring of vital signs. Novel low-power implementations of this technology promise to enable vital sign sensing in embedded, battery-operated devices. The nature of these new low-power sensors exacerbates the challenges of accurate and robust vital sign monitoring and especially the problem of heart-rate tracking. This work focuses on the investigation and characterization of three Frequency Modulated Continuous Wave (FMCW) low-power radars with different carrier frequencies of 24 GHz, 60 GHz and 120 GHz. The evaluation platforms were first tested on phantom models that emulated human bodies to accurately evaluate the baseline noise, error in range estimation, and error in displacement estimation. Additionally, the systems were also used to collect data from three human subjects to gauge the feasibility of identifying heartbeat peaks and breathing peaks with simple and lightweight algorithms that could potentially run in low-power embedded processors. The investigation revealed that the 24 GHz radar has the highest baseline noise level, 0.04mm at 0° angle of incidence, and an error in range estimation of 3.45 +- 1.88 cm at a distance of 60 cm. At the same distance, the 60 GHz and the 120 GHz radar system shows the least noise level, 0.0lmm at 0° angle of incidence, and error in range estimation 0.64 +- 0.01 cm and 0.04 +- 0.0 cm respectively. Additionally, tests on humans showed that all three radar systems were able to identify heart and breathing activity but the 120 GHz radar system outperformed the other two.

Signal Processing
Dual-Modality X-Ray-Induced Radiation Acoustic and Ultrasound Imaging for Real-Time Monitoring of Radiotherapy

Wei Zhang,Ibrahim Oraiqat,Hao Lei,Paul L. Carson,Issam EI Naqa,Xueding Wang

DOI: https://doi.org/10.34133/2020/9853609

2020-05-26

BME Frontiers

Abstract:Objective . The goal is to increase the precision of radiation delivery during radiotherapy by tracking the movements of the tumor and other surrounding normal tissues due to respiratory and other body motions. Introduction . This work presents the recent advancement of X-ray-induced radiation acoustic imaging (xRAI) technology and the evaluation of its feasibility for real-time monitoring of geometric and morphological misalignments of the X-ray field with respect to the target tissue by combining xRAI with established ultrasound (US) imaging, thereby improving radiotherapy tumor eradication and limiting treatment side effects. Methods . An integrated xRAI and B-mode US dual-modality system was established based on a clinic-ready research US platform. The performance of this dual-modality imaging system was evaluated via experiments on phantoms and ex vivo and in vivo rabbit liver models. Results . This system can alternatively switch between the xRAI and the US modes, with spatial resolutions of 1.1 mm and 0.37 mm, respectively. 300 times signal averaging was required for xRAI to reach a satisfactory signal-to-noise ratio, and a frame rate of 1.1 Hz was achieved with a clinical linear accelerator. The US imaging frame rate was 22 Hz, which is sufficient for real-time monitoring of the displacement of the target due to internal body motion. Conclusion . Our developed xRAI, in combination with US imaging, allows for mapping of the dose deposition in biological samples in vivo , in real-time, during radiotherapy. Impact Statement . The US-based image-guided radiotherapy system presented in this work holds great potential for personalized cancer treatment and better outcomes.

English Else
DMLC motion tracking of moving targets for intensity modulated arc therapy treatment: a feasibility study

Jens Zimmerman,Stine Korreman,Gitte Persson,Herb Cattell,Michelle Svatos,Amit Sawant,Raghu Venkat,David Carlson,Paul Keall

DOI: https://doi.org/10.1080/02841860802266722

Abstract:Purpose: Intensity modulated arc therapy offers great advantages with the capability of delivering a fast and highly conformal treatment. However, moving targets represent a major challenge. By monitoring a moving target it is possible to make the beam follow the motion, shaped by a Dynamic MLC (DMLC). The aim of this work was to evaluate the dose delivered to moving targets using the RapidArc (Varian Medical Systems, Inc.) technology with and without a DMLC tracking algorithm. Material and methods: A Varian Clinac iX was equipped with a preclinical RapidArc and a 3D DMLC tracking application. A motion platform was placed on the couch, with the detectors on top: a PTW seven29 and a Scandidos Delta4. One lung plan and one prostate plan were delivered. Motion was monitored using a Real-time Position Management (RPM) system. Reference measurements were performed for both plans with both detectors at state (0) "static, no tracking". Comparing measurements were made at state (1) "motion, no tracking" and state (2) "motion, tracking". Results: Gamma analysis showed a significant improvement from measurements of state (1) to measurements of state (2) compared to the state (0) measurements: Lung plan; from 87 to 97% pass. Prostate plan; from 81 to 88% pass. Sub-beam information gave a much reduced pattern of periodically spatial deviating dose points for state (2) than for state (1). Iso-dose curve comparisons showed a slightly better agreement between state (0) and state (2) than between state (0) and state (1). Conclusions: DMLC tracking together with RapidArc make a feasible combination and is capable of improving the dose distribution delivered to a moving target. It seems to be of importance to minimize noise influencing the tracking, to gain the full benefit from the application.
Online 4D ultrasound guidance for real-time motion compensation by MLC tracking

Svenja Ipsen,Ralf Bruder,Rick O'Brien,Paul J Keall,Achim Schweikard,Per R Poulsen

DOI: https://doi.org/10.1118/1.4962932

Abstract:Purpose: With the trend in radiotherapy moving toward dose escalation and hypofractionation, the need for highly accurate targeting increases. While MLC tracking is already being successfully used for motion compensation of moving targets in the prostate, current real-time target localization methods rely on repeated x-ray imaging and implanted fiducial markers or electromagnetic transponders rather than direct target visualization. In contrast, ultrasound imaging can yield volumetric data in real-time (3D + time = 4D) without ionizing radiation. The authors report the first results of combining these promising techniques-online 4D ultrasound guidance and MLC tracking-in a phantom. Methods: A software framework for real-time target localization was installed directly on a 4D ultrasound station and used to detect a 2 mm spherical lead marker inside a water tank. The lead marker was rigidly attached to a motion stage programmed to reproduce nine characteristic tumor trajectories chosen from large databases (five prostate, four lung). The 3D marker position detected by ultrasound was transferred to a computer program for MLC tracking at a rate of 21.3 Hz and used for real-time MLC aperture adaption on a conventional linear accelerator. The tracking system latency was measured using sinusoidal trajectories and compensated for by applying a kernel density prediction algorithm for the lung traces. To measure geometric accuracy, static anterior and lateral conformal fields as well as a 358° arc with a 10 cm circular aperture were delivered for each trajectory. The two-dimensional (2D) geometric tracking error was measured as the difference between marker position and MLC aperture center in continuously acquired portal images. For dosimetric evaluation, VMAT treatment plans with high and low modulation were delivered to a biplanar diode array dosimeter using the same trajectories. Dose measurements with and without MLC tracking were compared to a static reference dose using 3%/3 mm and 2%/2 mm γ-tests. Results: The overall tracking system latency was 172 ms. The mean 2D root-mean-square tracking error was 1.03 mm (0.80 mm prostate, 1.31 mm lung). MLC tracking improved the dose delivery in all cases with an overall reduction in the γ-failure rate of 91.2% (3%/3 mm) and 89.9% (2%/2 mm) compared to no motion compensation. Low modulation VMAT plans had no (3%/3 mm) or minimal (2%/2 mm) residual γ-failures while tracking reduced the γ-failure rate from 17.4% to 2.8% (3%/3 mm) and from 33.9% to 6.5% (2%/2 mm) for plans with high modulation. Conclusions: Real-time 4D ultrasound tracking was successfully integrated with online MLC tracking for the first time. The developed framework showed an accuracy and latency comparable with other MLC tracking methods while holding the potential to measure and adapt to target motion, including rotation and deformation, noninvasively.
Markerless motion tracking with simultaneous MV and kV imaging in spine SBRT treatment-a feasibility study

Weixing Cai,Qiyong Fan,Feifei Li,Xiuxiu He,Pengpeng Zhang,Laura Cervino,Xiang Li,Tianfang Li

DOI: https://doi.org/10.1088/1361-6560/acae16

2023-01-23

Abstract:Objective. Motion tracking with simultaneous MV-kV imaging has distinct advantages over single kV systems. This research is a feasibility study of utilizing this technique for spine stereotactic body radiotherapy (SBRT) through phantom and patient studies.Approach. A clinical spine SBRT plan was developed using 6xFFF beams and nine sliding-window IMRT fields. The plan was delivered to a chest phantom on a linear accelerator. Simultaneous MV-kV image pairs were acquired during beam delivery. KV images were triggered at predefined intervals, and synthetic MV images showing enlarged MLC apertures were created by combining multiple raw MV frames with corrections for scattering and intensity variation. Digitally reconstructed radiograph (DRR) templates were generated using high-resolution CBCT reconstructions (isotropic voxel size (0.243 mm)3) as the reference for 2D-2D matching. 3D shifts were calculated from triangulation of kV-to-DRR and MV-to-DRR registrations. To evaluate tracking accuracy, detected shifts were compared to known phantom shifts as introduced before treatment. The patient study included a T-spine patient and an L-spine patient. Patient datasets were retrospectively analyzed to demonstrate the performance in clinical settings.Main results. The treatment plan was delivered to the phantom in five scenarios: no shift, 2 mm shift in one of the longitudinal, lateral and vertical directions, and 2 mm shift in all the three directions. The calculated 3D shifts agreed well with the actual couch shifts, and overall, the uncertainty of 3D detection is estimated to be 0.3 mm. The patient study revealed that with clinical patient image quality, the calculated 3D motion agreed with the post-treatment cone beam CT. It is feasible to automate both kV-to-DRR and MV-to-DRR registrations using a mutual information-based method, and the difference from manual registration is generally less than 0.3 mm.Significance. The MV-kV imaging-based markerless motion tracking technique was validated through a feasibility study. It is a step forward toward effective motion tracking and accurate delivery for spinal SBRT.
First experimental investigation of simultaneously tracking two independently moving targets on an MRI-linac using real-time MRI and MLC tracking

Paul Z Y Liu,Bing Dong,Doan Trang Nguyen,Yuanyuan Ge,Emily A Hewson,David E J Waddington,Ricky O'Brien,Gary P Liney,Paul J Keall

DOI: https://doi.org/10.1002/mp.14536

Abstract:Purpose: High quality radiotherapy is challenging in cases where multiple targets with independent motion are simultaneously treated. A real-time tumor tracking system that can simultaneously account for the motion of two targets was developed and characterized. Methods: The multitarget tracking system was implemented on a magnetic resonance imaging (MRI)-linac and utilized multi-leaf collimator (MLC) tracking to adapt the radiation beam to phantom targets reproducing motion with prostate and lung motion traces. Multitarget tracking consisted of three stages: (a) pretreatment aperture segmentation where the treatment aperture was divided into segments corresponding to each target, (b) MR imaging where the positions of the two targets were localized, and (c) MLC tracking where an updated treatment aperture was calculated. Electronic portal images (EPID) acquired during irradiation were analyzed to characterize geometric uncertainty and tracking latency. Results: Multitarget MLC tracking effectively accounted for the motion of both targets during treatment. The root-mean-square error between the centers of the targets and the centers of the corresponding MLC leaves were reduced from 5.5 mm without tracking to 2.7 mm with tracking for lung motion traces and reduced from 4.2 to 1.4 mm for prostate motion traces. The end-to-end latency of tracking was measured to be 328 ± 44 ms. Conclusions: We have demonstrated the first experimental implementation of MLC tracking for multiple targets having independent motion. This technology takes advantage of the imaging capabilities of MRI-linacs and would allow treatment margins to be reduced in cases where multiple targets are simultaneously treated.
Experimental investigation of a general real-time 3D target localization method using sequential kV imaging combined with respiratory monitoring

Byungchul Cho,Per Poulsen,Dan Ruan,Amit Sawant,Paul J Keall

DOI: https://doi.org/10.1088/0031-9155/57/22/7395

2012-11-21

Abstract:The goal of this work was to experimentally quantify the geometric accuracy of a novel real-time 3D target localization method using sequential kV imaging combined with respiratory monitoring for clinically realistic arc and static field treatment delivery and target motion conditions. A general method for real-time target localization using kV imaging and respiratory monitoring was developed. Each dimension of internal target motion T(x, y, z; t) was estimated from the external respiratory signal R(t) through the correlation between R(t(i)) and the projected marker positions p(x(p), y(p); t(i)) on kV images by a state-augmented linear model: T(x, y, z; t) = aR(t) + bR(t - τ) + c. The model parameters, a, b, c, were determined by minimizing the squared fitting error ∑‖p(x(p), y(p); t(i)) - P(θ(i)) · (aR(t(i)) + bR(t(i) - τ) + c)‖(2) with the projection operator P(θ(i)). The model parameters were first initialized based on acquired kV arc images prior to MV beam delivery. This method was implemented on a trilogy linear accelerator consisting of an OBI x-ray imager (operating at 1 Hz) and real-time position monitoring (RPM) system (30 Hz). Arc and static field plans were delivered to a moving phantom programmed with measured lung tumour motion from ten patients. During delivery, the localization method determined the target position and the beam was adjusted in real time via dynamic multileaf collimator (DMLC) adaptation. The beam-target alignment error was quantified by segmenting the beam aperture and a phantom-embedded fiducial marker on MV images and analysing their relative position. With the localization method, the root-mean-squared errors of the ten lung tumour traces ranged from 0.7-1.3 mm and 0.8-1.4 mm during the single arc and five-field static beam delivery, respectively. Without the localization method, these errors ranged from 3.1-7.3 mm. In summary, a general method for real-time target localization using kV imaging and respiratory monitoring has been experimentally investigated for arc and static field delivery. The average beam-target error was 1 mm.
Performance Assessment of a Programmable Five Degrees-of-freedom Motion Platform for Quality Assurance of Motion Management Techniques in Radiotherapy

Chen-Yu Huang,Paul Keall,Adam Rice,Emma Colvill,Jin Aun Ng,Jeremy T. Booth

DOI: https://doi.org/10.1007/s13246-017-0572-0

2017-01-01

Australasian Physical & Engineering Sciences in Medicine

Abstract:Inter-fraction and intra-fraction motion management methods are increasingly applied clinically and require the development of advanced motion platforms to facilitate testing and quality assurance program development. The aim of this study was to assess the performance of a 5 degrees-of-freedom (DoF) programmable motion platform HexaMotion (ScandiDos, Uppsala, Sweden) towards clinically observed tumor motion range, velocity, acceleration and the accuracy requirements of SABR prescribed in AAPM Task Group 142. Performance specifications for the motion platform were derived from literature regarding the motion characteristics of prostate and lung tumor targets required for real time motion management. The performance of the programmable motion platform was evaluated against (1) maximum range, velocity and acceleration (5 DoF), (2) static position accuracy (5 DoF) and (3) dynamic position accuracy using patient-derived prostate and lung tumor motion traces (3 DoF). Translational motion accuracy was compared against electromagnetic transponder measurements. Rotation was benchmarked with a digital inclinometer. The static accuracy and reproducibility for translation and rotation was <0.1 mm or <0.1°, respectively. The accuracy of reproducing dynamic patient motion was <0.3 mm. The motion platform’s range met the need to reproduce clinically relevant translation and rotation ranges and its accuracy met the TG 142 requirements for SABR. The range, velocity and acceleration of the motion platform are sufficient to reproduce lung and prostate tumor motion for motion management. Programmable motion platforms are valuable tools in the investigation, quality assurance and commissioning of motion management systems in radiation oncology.
Su-Gg-J-148: Evaluation of Performance of A Conceptual Time-Resolved Proton Range Telescope for In-Room Respiration Monitoring Using Monte Carlo Simulations and 4dct Patient Data

B. Han,A. Ding,X. Xu,B. Bednarz,G. Sharp,N. Choi,G. Chen,K. Riper

DOI: https://doi.org/10.1118/1.3468371

2010-01-01

Abstract:Purpose: To demonstrate the feasibility to perform and optimize a time‐resolved proton range telescope (TRRT) in localization of moving lung tumors and quantification of proton range variations. Method: A TRRT is designed to detect transmission protons and provide a fluoroscopic image showing tumor location and range perturbations prior to or during treatment. MCNPX code with a particle‐tracking feature was used to simulate and evaluate the TRRT performance, especially in visualizing and quantifying the proton range variations during respiration. Monoenergetic protons, 235 MeV in a 15cm × 15cm field, were tracked one by one as they pass through position detectors, 4DCT phantom, and finally scintillators that measured position and residual energies. Mass density and elemental composition of tissues were defined from a set of 4DCT of a lung patient. Radiological pathlength in the patient was determined by an energy‐range algorithm. Effects of multiple Coulomb scattering on image quality were determined by comparison with a pure ray‐tracing algorithm in Aqualyzer. Results: Interesting water equivalent length (WEL) maps for 10 respiratory phases were obtained to form fluoroscopic sequences. Appropriate color‐map windowing was used to visualize and measure tumor trajectories. The tumor trajectory extracted from the proton fluoroscopic simulation agreed with ground‐truth established by 4DCT to about 1mm. WEL difference maps were reconstructed to quantify respiration‐induced range changes. The maximum proton range pullback for the tumor target was measured to be 2.29 cm. Rejection of wide angle scatter events was found to effectively sharpen the image. Clinical applications to track the tumor during proton therapy using the range telescope are discussed. Conclusion: The performance of a TRRT is systematically studied and demonstrated by Monte Carlo simulations. When parameters are optimized, localization of a 2cm tumor is possible with an accuracy of about 1mm. Technical requirements for an operational device are discussed, including GPU acceleration.

Interleukin-8 neutralization for COPD.

Millimeter wave‐based patient setup verification and motion tracking during radiotherapy

Toward submillimeter accuracy in the management of intrafraction motion: the integration of real-time internal position monitoring and multileaf collimator target tracking

Nephropathy in a Hypercholesterolemic Mouse Model with Streptozotocin-Induced Diabetes

Simultaneous Motion Monitoring and Truth-In-Delivery Analysis Imaging Framework for MR-guided Radiotherapy

Real-time intrafraction motion monitoring in external beam radiotherapy

First experimental measurement of the effect of cardio-synchronous brain motion on the dose distribution during microbeam radiation therapy

Results of Images Acquired with Backscattered Mv Radiation Using A Pinhole Collimator

Distortion-Free Diffusion MRI using an MRI-Guided Tri-Cobalt 60 Radiotherapy System: Sequence Verification and Preliminary Clinical Experience.

SU-E-J-61: Monitoring Tumor Motion in Real-Time with EPID Imaging During Cervical Cancer Treatment

Real-time intra-fraction motion management in breast cancer radiotherapy: analysis of 2028 treatment sessions

Investigating the Feasibility of Rapid MRI for Image-Guided Motion Management in Lung Cancer Radiotherapy

Investigation of mmWave Radar Technology For Non-contact Vital Sign Monitoring

Dual-Modality X-Ray-Induced Radiation Acoustic and Ultrasound Imaging for Real-Time Monitoring of Radiotherapy

DMLC motion tracking of moving targets for intensity modulated arc therapy treatment: a feasibility study

Online 4D ultrasound guidance for real-time motion compensation by MLC tracking

Markerless motion tracking with simultaneous MV and kV imaging in spine SBRT treatment-a feasibility study

First experimental investigation of simultaneously tracking two independently moving targets on an MRI-linac using real-time MRI and MLC tracking

Experimental investigation of a general real-time 3D target localization method using sequential kV imaging combined with respiratory monitoring

Performance Assessment of a Programmable Five Degrees-of-freedom Motion Platform for Quality Assurance of Motion Management Techniques in Radiotherapy

Su-Gg-J-148: Evaluation of Performance of A Conceptual Time-Resolved Proton Range Telescope for In-Room Respiration Monitoring Using Monte Carlo Simulations and 4dct Patient Data