Electrocatalytic reforming of waste plastics into high value-added chemicals and hydrogen fuel

Rui Shi,Ke-Sheng Liu,Fulai Liu,Xiao Yang,Chun-Chao Hou,Yong Chen

DOI: https://doi.org/10.1039/d1cc05032j

IF: 4.9

2021-01-01

Chemical Communications

Abstract:We report an electroreforming strategy to upcycle waste PET into value-added chemicals and H 2 using Pd as the anode and Ni foam as the cathode.

chemistry, multidisciplinary

What problem does this paper attempt to address?

Electrocatalytic upcycling of polyethylene terephthalate to commodity chemicals and H2 fuel

Hua Zhou,Yue Ren,Zhenhua Li,Ming Xu,Ye Wang,Ruixiang Ge,Xianggui Kong,Lirong Zheng,Haohong Duan

DOI: https://doi.org/10.1038/s41467-021-25048-x

IF: 16.6

2021-08-17

Nature Communications

Abstract:Abstract Plastic wastes represent a largely untapped resource for manufacturing chemicals and fuels, particularly considering their environmental and biological threats. Here we report electrocatalytic upcycling of polyethylene terephthalate (PET) plastic to valuable commodity chemicals (potassium diformate and terephthalic acid) and H 2 fuel. Preliminary techno-economic analysis suggests the profitability of this process when the ethylene glycol (EG) component of PET is selectively electrooxidized to formate (>80% selectivity) at high current density (>100 mA cm −2 ). A nickel-modified cobalt phosphide (CoNi 0.25 P) electrocatalyst is developed to achieve a current density of 500 mA cm −2 at 1.8 V in a membrane-electrode assembly reactor with >80% of Faradaic efficiency and selectivity to formate. Detailed characterizations reveal the in-situ evolution of CoNi 0.25 P catalyst into a low-crystalline metal oxy(hydroxide) as an active state during EG oxidation, which might be responsible for its advantageous performances. This work demonstrates a sustainable way to implement waste PET upcycling to value-added products.

multidisciplinary sciences
Electro-Reforming Polyethylene Terephthalate Plastic to Co-Produce Valued Chemicals and Green Hydrogen.

Jianying Wang,Xin Li,Ting Zhang,Yuetian Chen,Tianfu Wang,Yixin Zhao

DOI: https://doi.org/10.1021/acs.jpclett.1c03658

IF: 6.888

2022-01-01

The Journal of Physical Chemistry Letters

Abstract:Upcycling plastic waste pollution for sustainable resources and energy is an ideal solution to plastic waste-related environmental issues. Polyethylene terephthalate (PET), one of the most prominent single-use daily plastics with up to millions of tons produced annually, has recently been explored with respect to chemical recycling to ameliorate its environmental impact. In this work, we report an electrochemical upcycling approach to electrocatalytic oxidation of PET hydrolysate using Cu-based nanowire catalysts. We demonstrate that the electrocatalyst can catalyze the ethylene glycol (EG) molecule derived from PET waste toward formate with high selectivity and exhibit a lower onset potential for EG oxidation than for water oxidation. Experimental and density functional theory calculation results reveal that the oxidation pathway of EG on CuO can selectively break the C-C bond to generate formic acid. This work sheds light on employing earth-abundant metal catalysts to convert PET plastic waste to produce valued chemicals and green hydrogen.
Photovoltaic-driven electrocatalytic upcycling poly(ethylene terephthalate) plastic waste coupled with hydrogen generation

Ting Zhang,Xin Li,Jianying Wang,Yanfeng Miao,Tianfu Wang,Xufang Qian,Yixin Zhao

DOI: https://doi.org/10.1016/j.jhazmat.2023.131054

2023-05-15

Abstract:The electrochemical upconversion of plastic wastes has been demonstrated as an attractive alternative to the sluggish OER process to simultaneously produce valued chemicals and reduce the energy consumption. Herein, we report a photovoltaic-driven electrocatalytic strategy to upcycle poly(ethylene terephthalate) (PET) into value-added formic acid products and co-produce green hydrogen. The waste PET was dissolved by KOH and then directly pumped into an electrochemical flow reactor (EFR) including CuO nanowires (NWs) anode and Pt/C 20% cathode (PV-EFR) and driven by the commercial silicon photovoltaic (PV) panels. This PV-EFR system exhibits a solar-to-chemical (STC) efficiency of 32.6% under AM 1.5 G simulated sunlight (100 mW cm-2), and high Faradaic efficiencies (FE, ∼ 67% for formic acid, and ∼90% for green hydrogen) with exceptional 120 h long-term stability in the STC mode. Such a photovoltaic-driven electrocatalytic strategy exhibits great potential for the rational utilization of renewable energy sources to produce high-value chemicals and fuels by upconversion of waste plastics.
Photoelectrochemical conversion of plastic waste into high-value chemicals coupling hydrogen production

Bowen Zhang,Huiyan Zhang,Yuyang Pan,Jingjing Shao,Xintie Wang,Yuting Jiang,Xiaoyu Xu,Sheng Chu

DOI: https://doi.org/10.1016/j.cej.2023.142247

IF: 15.1

2023-03-09

Chemical Engineering Journal

Abstract:There is no satisfactory treatment technology for plastic waste, which has been a global challenge so far. Here, we report a photoelectrochemical approach for efficient valorization of waste polyethylene terephthalate (PET) plastic to produce formate coupled with green hydrogen production. Due to the cocatalytic effect of nickel phosphate (Ni-Pi) on α-Fe 2 O 3 photoanode, the Faradaic efficiency of PET hydrolysate solution to formate reached as high as 87% in aqueous electrolyte without any additional oxidant. In addition, an integrated PET oxidation-hydrogen production system achieved a photocurrent density of 1.5 mA/cm 2 at a cell voltage of 1.1 V, which is 270 mV lower than the conventional water splitting. Furthermore, we also demonstrate that high selective formate production was also applicable to real-world waste PET plastic. This work provides a sustainable paradigm on photoelectrochemical strategy to upcycle waste PET plastic into value-added chemicals and green hydrogen.

engineering, chemical, environmental
Corrosion Engineering of Part-Per-Million Single Atom Pt1/Ni(OH)2 Electrocatalyst for PET Upcycling at Ampere-Level Current Density

Minwei Song,Yufeng Wu,Ziyi Zhao,Mengting Zheng,Changlong Wang,Jun Lu

DOI: https://doi.org/10.1002/adma.202403234

IF: 29.4

2024-01-01

Advanced Materials

Abstract:The plastic waste issue has posed a series of formidable challenges for the ecological environment and human health. While conventional recycling strategies often lead to plastic down-cycling, the electrochemical strategy of recovering valuable monomers enables an ideal, circular plastic economy. Here a corrosion synthesized single atom Pt1/Ni(OH)2 electrocatalyst with part-per-million noble Pt loading for highly efficient and selective upcycling of polyethylene terephthalate (PET) into valuable chemicals (potassium diformate and terephthalic acid) and green hydrogen is reported. Electro-oxidation of PET hydrolysate, ethylene glycol (EG), to formate is processed with high Faraday efficiency (FE) and selectivity (>90%) at the current density close to 1000 mA cm-2 (1.444 V vs RHE). The in situ spectroscopy and density functional theory calculations provide insights into the mechanism and the understanding of the high efficiency. Remarkably, the electro-oxidation of EG at the ampere-level current density is also successfully illustrated by using a membrane-electrode assembly with high FEs to formate integrated with hydrogen production for 500 h of continuous operation. This process allows valuable chemical production at high space-time yield and is highly profitable (588-700 $ ton-1 PET), showing an industrial perspective on single-atom catalysis of electrochemical plastic upcycling.
Upcycling PET in parallel with energy-saving H2 production via bifunctional nickel-cobalt nitride nanosheets

Xuan Liu,Zhongying Fang,Dengke Xiong,Shuaiqi Gong,Yanli Niu,Wei Chen,Zuofeng Chen

DOI: https://doi.org/10.1007/s12274-022-5085-9

IF: 9.9

2022-10-26

Nano Research

Abstract:We describe here an electro-reforming strategy to upcycle polyethylene terephthalate (PET) waste with simultaneous hydrogen production by a bifunctional nickel-cobalt nitride nanosheets electrocatalyst. PET plastics are digested in alkaline solution giving an electrochemically active monomer ethylene glycol (EG). The introduction of Co in Co-Ni3N/carbon cloth (CC) promotes the redox behavior of Ni2+/Ni3+, which is beneficial for EG oxidation at an ultra-low potential (1.15 V vs. reversible hydrogen electrode (RHE)) and breaks through the limitation of high catalytic potentials of simple Ni-based electrocatalysts (1.30 V). In PET hydrolysate with Co-Ni3N/CC couples, an integrated EG oxidation-hydrogen production system achieves a current density of 50 mA·cm−2 at a cell voltage of 1.46 V, which is 370 mV lower than the conventional water splitting. The in-situ Raman and Fourier transform infrared (FTIR) spectroscopies and density functional theory (DFT) calculations identify the catalytic mechanism and point to advantages of heterostructure engineering in optimizing adsorption energies and promoting catalytic activities for EG oxidation.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Photovoltaic-driven Electro-Reforming of Poly (ethylene Terephthalate) (PET) Waste Plastics and Nitrate Pollutants

Sen Yang,Chengcheng Cai,Jiyi Sun,Nodirali Normakhamatov,Avez Sharipov,Chenbao Lu,Xiaodong Zhuang,Xufang Qian,Yixin Zhao,Tianfu Wang

DOI: https://doi.org/10.1016/j.ces.2024.120186

IF: 4.7

2024-01-01

Chemical Engineering Science

Abstract:The electrochemical conversion of waste plastics and nitrate pollutants has advantages in the simultaneous achievement of value-added chemical production and environmental pollutants remediation. Here, we report a photovoltaic-driven electro-reforming strategy to convert poly (ethylene terephthalate) (PET) to platform chemical formic acid, and simultaneously reduce nitrate to ammonia. This strategy directly uses commercial silicon photovoltaic panel as the power source that achieves the oxidation of PET hydrolysate to produce formic acid by NiCo 2 O 4 /N-doped carbon nanotubes (NCNTs) anode, and the reduction of nitrate-containing wastewater to produce ammonia by CuO nanowires (NWs) cathode. This integrated system exhibits a high Faraday efficiency of 98 % for formic acid production and conversion of 90 % for nitrate under 30 mW cm -2 simulated sunlight. This study suggests that photovoltaic-driven electro-reforming of PET waste plastic coupled with nitrate reduction could be a feasible strategy to realize the sustainable production of chemicals from environmental pollutants.
Electrocatalytic Valorization of Poly(ethylene terephthalate) Plasticand CO(2 )for Simultaneous Production of Formic Acid

Jianying Wang,Xin Li,Maolin Wang,Ting Zhang,Xinyu Chai,Junlin Lu,Tianfu Wang,Yixin Zhao,Ding Ma

DOI: https://doi.org/10.1021/acscatal.2c01128

IF: 12.9

2022-01-01

ACS Catalysis

Abstract:The electro-reforming of polymer plastic waste and CO2has the meritsfor producing value-added chemicals and alleviating environmental pollution. Herein,we report an electrocatalytic integrating strategy for efficient valorization ofpoly(ethylene terephthalate) (PET) plastic and CO2to simultaneously produce formicacid at both anode and cathode. The NiCo2O4electrocatalyst displays a high Faradaicefficiency of 90% for formic acid production, which indicates the excellent selectivity forPET hydrolysate oxidation. By coupling the PET hydrolysate oxidation reaction withthe CO2reduction reaction, the assembled electrolyzer exhibits a low cell voltage of 1.55V to drive the integrated two half-reactions. Furthermore, a high Faradaic efficiency of155% for formic acid can be achieved at a cell voltage of 1.90 V. This study suggests thatelectrocatalytic valorization of PET plastic coupling with CO2reduction could be an energy-efficient and economically viablestrategy to realize the production of value-added chemicals
Photovoltaic-driven Ni(ii)/Ni(iii) Redox Mediator for the Valorization of PET Plastic Waste with Hydrogen Production

Jianying Wang,Xin Li,Ting Zhang,Xinyu Chai,Mingze Xu,Menglei Feng,Chengcheng Cai,Zuofeng Chen,Xufang Qian,Yixin Zhao

DOI: https://doi.org/10.1039/d4sc01613k

IF: 8.4

2024-01-01

Chemical Science

Abstract:Electrocatalytic valorization of PET plastic waste provides an appealing route by converting intermittent renewable energy into valuable chemicals and high-energy fuels. Normally, anodic PET hydrolysate oxidation and cathodic water reduction reactions occur simultaneously in the same time and space, which increases the challenges for product separation and operational conditions. Although these problems can be addressed by utilizing membranes or diaphragms, the parasitic cell resistance and high overall cost severely restrict their future application. Herein, we introduce a Ni(ii)/Ni(iii) redox mediator to decouple these reactions into two independent processes: an electrochemical process for water reduction to produce hydrogen fuel assisted by the oxidation of the Ni(OH)2 electrode into the NiOOH counterpart, followed subsequently by a spontaneous chemical process for the valorization of PET hydrolysate to produce formic acid with a high faradaic efficiency of ∼96% by the oxidized NiOOH electrode. This decoupling strategy enables the electrochemical valorization of PET plastic waste in a membrane-free system to produce high-value formic acid and high-purity hydrogen production. This study provides an appealing route to facilitate the transformation process of PET plastic waste into high-value products with high efficiency, low cost and high purity.
Electrochemical Production of Glycolate Fuelled By Polyethylene Terephthalate Plastics with Improved Techno‐Economics

Mengmeng Du,Yu Zhang,Sailei Kang,Chao Xu,Yingxin Ma,Lejuan Cai,Ye Zhu,Yang Chai,Bocheng Qiu

DOI: https://doi.org/10.1002/smll.202303693

IF: 13.3

2023-05-27

Small

Abstract:Valorization of polyethylene terephthalate (PET) plastics into commodity chemicals remains an attractive prospect. In this work, the efficient electrooxidation of real‐word PET bottles is implemented to high‐value glycolate with high Faradaic efficiency and selectivity in alkaline solution under a low applied potential of 0.55 V over Pt‐loaded γ‐NiOOH nanosheets grown on nickel foam. Electrochemical valorization of polyethylene terephthalate (PET) waste streams into commodity chemicals offers a potentially sustainable route for creating a circular plastic economy. However, PET wastes upcycling into valuable C2 product remains a huge challenge by the lack of an electrocatalyst that can steer the oxidation economically and selectively. Here, it is reported a catalyst comprising Pt nanoparticles hybridized with γ‐NiOOH nanosheets supported on Ni foam (Pt/γ‐NiOOH/NF) that favors electrochemical transformation of real‐word PET hydrolysate into glycolate with high Faradaic efficiency (> 90%) and selectivity (> 90%) across wide reactant (ethylene glycol, EG) concentration ranges under a marginal applied voltage of 0.55 V, which can be paired with cathodic hydrogen production. Computational studies combined with experimental characterizations elucidate that the Pt/γ‐NiOOH interface with substantial charge accumulation gives rise to an optimized adsorption energy of EG and a decreased energy barrier of potential determining step. A techno‐economic analysis demonstrates that, with the nearly same amount of resource investment, the electroreforming strategy towards glycolate production can raise revenue by up to 2.2 times relative to conventional chemical process. This work may thus serve as a framework for PET wastes valorization process with net‐zero carbon footprint and high economic viability.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Electrocatalytic Reforming of Polylactic Acid Plastic Hydrolysate over Dynamically Formed γ-NiOOH

Yinfang Chen,Xinyan Zhang,Chunxiao Liu,Weiqing Xue,Miaojin Wei,Sunpei Hu,Qiu Jiang,Tingting Zheng,Xu Li,Chuan Xia

DOI: https://doi.org/10.1021/acsami.4c01733

IF: 9.5

2024-04-11

ACS Applied Materials & Interfaces

Abstract:Upcycling plastic waste into valuable commodity chemicals with clean energy is an appealing strategy for mitigating environmental issues. Polylactic acid (PLA), a biodegradable plastic that is produced annually in millions of tons, can be chemically recycled to valuable products instead of being degraded to carbon dioxide. Here, we demonstrate an electrochemical reforming of PLA hydrolysate to acetate and acetonate using nickel phosphide nanosheets on nickel foam (Ni(2)P/NF) as the catalyst. The...

materials science, multidisciplinary,nanoscience & nanotechnology
Selective electrocatalytic reforming of PET-derived ethylene glycol to formate with a Faraday efficiency of 93.2% at industrial-level current densities

Kesheng Liu,Yuxiang Wang,Fulai Liu,Chuxuan Liu,Rui Shi,Yong Chen

DOI: https://doi.org/10.1016/j.cej.2023.145292

IF: 15.1

2023-08-12

Chemical Engineering Journal

Abstract:The accumulation of plastic waste results in severe environmental pollution and enormous losses of valuable resources, and thus recycling plastic waste has become an urgent scientific and social challenge. Herein, we report the electrocatalytic reforming of polyethylene terephthalate (PET)-derived ethylene glycol (EG) to formate by using a Ni(OH) 2 /Ni foam catalyst, which exhibits > 90% Faraday efficiency and selectivity even at industrially relevant current densities (>500 mA cm -2 at 1.60 V vs RHE). In-situ electrochemical Raman spectroscopy reveals that NiOOH can be swiftly formed at a relatively low potential in the presence of EG and plays a crucial role toward PET-derived EG oxidation. The massive production of NiOOH leads to a large potential gap of 430 mV at 100 mA cm -2 compared to the oxygen evolution reaction (OER), hence improving the Faraday efficiency of EGOR. This work highlights the promising potential of electrocatalytic reforming of PET for practical applications.

engineering, chemical, environmental
Rapid Chemical Recycling of Waste Polyester Plastics Catalyzed by Recyclable Catalyst

Yu-Ji Luo,Jia-Yin Sun,Zhi Li

DOI: https://doi.org/10.1016/j.gce.2023.06.002

2024-01-01

Green Chemical Engineering

Abstract:Waste plastics are serious environmental threats due to their low degradability and low recycling rate. Rapid and efficient waste plastics recycling technologies are urgently demanded for a sustainable future. Herein, we report a rapid, closed-loop, and streamlined process to convert polyesters such as poly(ethylene terephthalate) (PET) back to its purified monomers. Using trifluoromethanesulfonic acid or metal triflates as the recyclable catalyst, polyesters such as PET can be completely depolymerized by simple carboxylic acids within 1 h. By coupling this acidolysis with a subsequent hydrogenolysis process, the consumed carboxylic acid was recovered and the closed-loop of PET depolymerization could be established. All catalysts and depolymerization agents are fully recycled while only PET and hydrogen are consumed.
Sustainable Solar-and Electro-Driven Production of High Concentration H2O2 Coupled to Electrocatalytic Upcycling of Polyethylene Terephthalate Plastic Waste

Xue Feng,Lijun Yang,Lei Zhang

DOI: https://doi.org/10.1016/j.cej.2024.149191

IF: 15.1

2024-01-01

Chemical Engineering Journal

Abstract:The photoelectro-reforming of poly (ethylene terephthalate) (PET) waste coupled with the synthesis of hydrogen peroxide (H2O2) poses significant implications for environmental and energy engineering, yet it presents substantial with challenges. A strategy offering an energy efficient photo-electrolysis is reported, which couples oxygen reduction reaction (ORR) with oxidation reaction of PET hydrolysate (glycol, EGOR), utilizating a porous hollow double-shell with oxygen vacancies Z-scheme Mo2N-Co3O4@Fe2O3/PVDF/NF cathode and a Co3O4/NF anode within a cell electrolyser. The H2O2 concentration by hydrophobic photocathode (3.4 wt%) significantly surpasses that of hydrophilic electrode (1.9 wt%), attributing to the hydrophobic modified enhances the mass transfer and utilization efficiency of O2. The Mo2N-Co3O4@Fe2O3 has photothermal effect by introducing Mo2N with local surface plasmon resonance (LSPR) for the direct synthesis of high concentration H2O2 (21.4 wt%). The photoelectro-reforming of PET by photoanode yields the value-added products such as terephthalic acid (PTA) and potassium diformate (KDF) with a high Faradic efffciency (89 %). Notably, EGOR assistes the ORR, resulting in a yield of H2O2 by ORR that is significantly improved at least three times in comparison to the water oxidation reaction coordinated with ORR. This research contributes to a feasible methodology for H2O2 production, and the transformation of plastics and other waste materials into value-added chemicals.
Electrocatalytic valorization of waste polyethylene furanoate (PEF) bioplastic for the production of formic acid and hydrogen energy

Liwen Ren,Sen Yang,Jianying Wang,Ting Zhang,Xin Li,Tianfu Wang,Yixin Zhao

DOI: https://doi.org/10.1039/d3re00028a

2023-04-14

Abstract:The use of bio-based plastics instead of fossil-derived plastics is a possible solution to mitigate the negative impact of energy crisis and climate change caused by extensive use of non-renewable fossil resources. Polyethylene furanoate (PEF) plastic is regarded as a potential alternative to replace polyethylene terephthalate (PET) plastics due to its sustainablility and biodegradability, but it faces similar problems including long degradation time and waste of carbon resources. In this work, different cobalt-based oxide catalysts have been used as electrocatalysts for the selective oxidation of PEF hydrolysates to produce formic acid. It was found that NiCo2O4 electrocatalyst could achieve 85.8% conversion and a high Faradaic efficiency of 98% towards formic acid production under the reaction conditions of ethylene glycol (EG) oxidation (pH = 14) at the constant potential of 1.40 V vs. reversible hydrogen electrode (RHE). In contrast to PEF degradation to waste organics and CO2 in the open environment, the electrochemical approach presented in this work provides an alternative strategy to produce valuable chemicals and hydrogen energy using waste PEF plastics.

chemistry, multidisciplinary,engineering, chemical
Defective Nickel Sulfide Hierarchical Structure for Efficient Electrochemical Conversion of Plastic Waste to Value-Added Chemicals and Hydrogen Fuel

Zhijie Chen,Wei Wei,Yansong Shen,Bing-Jie Ni

DOI: https://doi.org/10.1039/d3gc01499a

IF: 9.8

2023-07-04

Green Chemistry

Abstract:Valorizing plastic waste into value-added chemicals/fuels in a green manner (e.g., electrochemical reforming) is a sustainable way to address the global pressing plastic pollution. For the electro-reforming of plastic waste (e.g., polyethylene terephthalate (PET)), the development of highly active and selective catalysts remains a challenge. Herein, we have designed a low-cost and highly defective nickel sulfide to selectively convert ethylene glycol (PET monomer) into formate, with the co-production of hydrogen fuel. The optimal B and Co co-doped Ni3S2 (B,Co-NiS) only takes 1.341 V vs. reversible hydrogen electrode (RHE) at 100 mA cm-2 for ethylene glycol oxidation, and it can realize high Faradic efficiency (> 93%) and selectivity (> 92%) for EG-to-formate conversion over a wide potential range. Furthermore, the bifunctional B,Co-NiS assisted real PET waste hydrolysate electrolysis in a membrane-electrode assembly (MEA) can generate 15.24 mmol formate per hour and attain over 70 times H2 production efficiency than conventional water electrolysis. Mechanism analyses indicate the excellent catalytic performance of B,Co-NiS stems from the hierarchical structure, rich S defective sites, regulated electronic properties, and the dopants-facilitated in situ formation of active sulfide@oxyhydroxide phase. This work provides an integrated nanostructure control-composition regulation strategy to design cost-effective catalysts for plastic electro-upcycling and paves the way for low-carbon plastic waste management.

chemistry, multidisciplinary,green & sustainable science & technology
Sustainable Ammonia Electrosynthesis from Nitrate Wastewater Coupled to Electrocatalytic Upcycling of Polyethylene Terephthalate Plastic Waste

Tianlun Ren,Zuan Yu,Hongjie Yu,Kai Deng,Ziqiang Wang,Xiaonian Li,Hongjing Wang,Liang Wang,You Xu

DOI: https://doi.org/10.1021/acsnano.3c01862

IF: 17.1

2023-06-27

ACS Nano

Abstract:Integrating the nitrate reduction reaction (NO(3)RR) with polyethylene terephthalate (PET) hydrolysate oxidation to construct the nitrate/PET hydrolysate coelectrolysis system holds a great promise of realizing the simultaneous upcycling of nitrate wastewater and PET plastic waste, which, however, is still an almost untouched research area. Herein, we develop an ultralow content of Ru-incorporated Co-based metal-organic frameworks as a bifunctional precatalyst, which can be in situ reconstructed...

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Sustainable solar-and electro-driven production of high concentration H 2 O 2 coupled to electrocatalytic upcycling of polyethylene terephthalate plastic waste

Xue Feng,Lijun Yang,Lei Zhang

DOI: https://doi.org/10.1016/j.cej.2024.149191

IF: 15.1

2024-02-03

Chemical Engineering Journal

Abstract:The photoelectro-reforming of poly (ethylene terephthalate) (PET) waste coupled with the synthesis of hydrogen peroxide (H 2 O 2 ) poses significant implications for environmental and energy engineering, yet it presents substantial with challenges. A strategy offering an energy efficient photo-electrolysis is reported, which couples oxygen reduction reaction (ORR) with oxidation reaction of PET hydrolysate (glycol, EGOR), utilizating a porous hollow double-shell with oxygen vacancies Z-scheme Mo 2 N-Co 3 O 4 @Fe 2 O 3 /PVDF/NF cathode and a Co 3 O 4 /NF anode within a cell electrolyser. The H 2 O 2 concentration by hydrophobic photocathode (3.4 wt%) significantly surpasses that of hydrophilic electrode (1.9 wt%), attributing to the hydrophobic modified enhances the mass transfer and utilization efficiency of O 2 . The Mo 2 N-Co 3 O 4 @Fe 2 O 3 has photothermal effect by introducing Mo 2 N with local surface plasmon resonance (LSPR) for the direct synthesis of high concentration H 2 O 2 (21.4 wt%). The photoelectro-reforming of PET by photoanode yields the value-added products such as terephthalic acid (PTA) and potassium diformate (KDF) with a high Faradic efffciency (89 %). Notably, EGOR assistes the ORR, resulting in a yield of H 2 O 2 by ORR that is significantly improved at least three times in comparison to the water oxidation reaction coordinated with ORR. This research contributes to a feasible methodology for H 2 O 2 production, and the transformation of plastics and other waste materials into value-added chemicals.

engineering, chemical, environmental
Rapid Surface Reconstruction of Amorphous‐Crystalline NiO for Industrial‐Scale Electrocatalytic PET Upcycling

Wei Ding,Dongxiao Ji,Kangkang Wang,Yinghui Li,Qingliang Luo,Rongwu Wang,Linlin Li,Xiaohong Qin,Shengjie Peng

DOI: https://doi.org/10.1002/anie.202418640

2024-11-02

Angewandte Chemie International Edition

Abstract:The conversion of plastic waste into valuable chemicals through innovative and selective nano-catalysts offers significant economic benefits and positive environmental impacts. However, our current understanding of catalyst design capable of achieving industrial-grade current densities is limited. Herein, we develop a self-supported amorphous-crystalline NiO electrocatalyst for the electrocatalytic upcycling of polyethylene terephthalate (PET) into formate and hydrogen (H2) fuel. The catalyst achieves an industrial current density of over 1 A cm-2 at 1.5 V vs. RHE, with an 80% Faradaic efficiency and a formate production rate of 7.16 mmol cm-2 h-1. In situ Raman spectroscopy, X-ray absorption spectroscopy, and density functional theory calculations reveal that the rapid transformation of amorphous-crystalline NiO into γ-NiOOH at the amorphous-crystalline interface provides a thermodynamic advantage for formate desorption, leading to the high activity required for industrial applications, which is difficult to achieve for fully crystalline NiO. A techno-economic analysis indicates that recycling waste PET using this catalytic process could generate a profit of $501 per ton. This work presents a cost-effective and highly efficient approach to promoting the sustainable utilization of waste PET.

chemistry, multidisciplinary
Nitrogen-doped Ni3P–NiMoO4 Heterostructure Arrays for Coupling Hydrogen Production with Polyethylene Terephthalate Plastic Electro-Recycling

Hongjing Wang,Wenjie Zhan,Hongjie Yu,Shaojian Jiang,Beibei Wang,Kai Deng,Ziqiang Wang,You Xu,Liang Wang

DOI: https://doi.org/10.1016/j.mtphys.2023.101192

IF: 11.021

2023-01-01

Materials Today Physics

Abstract:The global plastic pollution problem has seriously affected the survival of natural and human organisms. Electrochemical polyethylene terephthalate (PET) plastic reforming powered by renewable electricity, is expected to provide an environmentally friendly, convenient, and efficient way to recycle plastics. Herein, we synthesized a heterostructure array catalyst of nitrogen-doped Ni3P-NiMoO4 on nickel foam (N-Ni3P-NiMoO4/NF) for coupling PET waste plastic electro-recycling and hydrogen production. Due to the rich catalytic active sites provided by the heterogeneous interface structure, N-Ni3P-NiMoO4/NF can achieve a low hydrogen evolution overpotential of 142 mV with a current density of 100 mA cm-2. The PET hydrolysate-containing electrolyte had a potential of 194 mV lower than that of conventional water splitting at a current density of 100 mA cm-2 and catalyze the conversion of PET hydrolysate to formate efficiently with a maximum Faraday efficiency of 92.2%. This work provides a new strategy and approach for upcycling resource utilization and energy-saving hydrogen production of PET waste plastic.

Electrocatalytic reforming of waste plastics into high value-added chemicals and hydrogen fuel

Electrocatalytic upcycling of polyethylene terephthalate to commodity chemicals and H2 fuel

Electro-Reforming Polyethylene Terephthalate Plastic to Co-Produce Valued Chemicals and Green Hydrogen.

Photovoltaic-driven electrocatalytic upcycling poly(ethylene terephthalate) plastic waste coupled with hydrogen generation

Photoelectrochemical conversion of plastic waste into high-value chemicals coupling hydrogen production

Corrosion Engineering of Part-Per-Million Single Atom Pt1/Ni(OH)2 Electrocatalyst for PET Upcycling at Ampere-Level Current Density

Upcycling PET in parallel with energy-saving H2 production via bifunctional nickel-cobalt nitride nanosheets

Photovoltaic-driven Electro-Reforming of Poly (ethylene Terephthalate) (PET) Waste Plastics and Nitrate Pollutants

Electrocatalytic Valorization of Poly(ethylene terephthalate) Plasticand CO(2 )for Simultaneous Production of Formic Acid

Photovoltaic-driven Ni(ii)/Ni(iii) Redox Mediator for the Valorization of PET Plastic Waste with Hydrogen Production

Electrochemical Production of Glycolate Fuelled By Polyethylene Terephthalate Plastics with Improved Techno‐Economics

Electrocatalytic Reforming of Polylactic Acid Plastic Hydrolysate over Dynamically Formed γ-NiOOH

Selective electrocatalytic reforming of PET-derived ethylene glycol to formate with a Faraday efficiency of 93.2% at industrial-level current densities

Rapid Chemical Recycling of Waste Polyester Plastics Catalyzed by Recyclable Catalyst

Sustainable Solar-and Electro-Driven Production of High Concentration H2O2 Coupled to Electrocatalytic Upcycling of Polyethylene Terephthalate Plastic Waste

Electrocatalytic valorization of waste polyethylene furanoate (PEF) bioplastic for the production of formic acid and hydrogen energy

Defective Nickel Sulfide Hierarchical Structure for Efficient Electrochemical Conversion of Plastic Waste to Value-Added Chemicals and Hydrogen Fuel

Sustainable Ammonia Electrosynthesis from Nitrate Wastewater Coupled to Electrocatalytic Upcycling of Polyethylene Terephthalate Plastic Waste

Sustainable solar-and electro-driven production of high concentration H 2 O 2 coupled to electrocatalytic upcycling of polyethylene terephthalate plastic waste

Rapid Surface Reconstruction of Amorphous‐Crystalline NiO for Industrial‐Scale Electrocatalytic PET Upcycling

Nitrogen-doped Ni3P–NiMoO4 Heterostructure Arrays for Coupling Hydrogen Production with Polyethylene Terephthalate Plastic Electro-Recycling