[Pain in chronic obliterating peripheral arteriopathy. Therapeutic possibilities].

P. Pola,L. Savi,A. Da Lago,M. Serricchio,M. Grilli

1980-12-31

Abstract:

What problem does this paper attempt to address?

Design of A Novel Graphene Terahertz Antenna at 500ghz with Reconfigurable Radiation Pattern

Hai-qiang Xia,Qin-Xu Pan,Jun Hu,Wen-Yan Yin

DOI: https://doi.org/10.1109/aps.2015.7305120

2015-01-01

Abstract:This paper proposes the design of a novel beam reconfigurable antenna operating at 500GHz. Such antenna is based on single-layer-graphene patches with tunable electrical conductivity. Three groups of graphene patches play a key role for achieving directivity such as for the Yagi-Uda antenna. The conductivity of each graphene patch can be dynamically controlled by the DC biasing voltage. Numerical results show that the radiation beam of the antenna can vary in a range of ±50°, its input impedance bandwidth is about 8% with the peak gain of 7.5dB obtained.
Reconfigurable Terahertz Leaky-Wave Antenna Using Graphene-Based High-Impedance Surface

Xu-Chen Wang,Wen-Sheng Zhao,Jun Hu,Wen-Yan Yin

DOI: https://doi.org/10.1109/TNANO.2014.2365205

2015-01-01

Abstract:The concept of graphene-based two-dimensional leaky-wave antenna (LWA), allowing both frequency tuning and beam steering in the terahertz band, is proposed in this paper. In its design, a graphene sheet is used as a tuning part of the high-impedance surface (HIS) that acts as the ground plane of such 2-D LWA. It is shown that, by adjusting the graphene conductivity, the reflection phase of the HIS can be altered effectively, thus controlling the resonant frequency of the 2-D LWA over a broad band. In addition, a flexible adjustment of its pointing direction can be achieved over a wide range, while keeping the operating frequency fixed. Transmission-line methods are used to accurately predict the antenna reconfigurable characteristics, which are further verified by means of commercial full-wave analysis tools.
Tunable complimentary frequency selective surface (CFSS) based on graphene for THz application

lin lin,linsheng wu,liang zhou,wenyan yin,junfa mao

2014-01-01

Abstract:In this paper, the graphene complimentary frequency selective surface (CFSS) is proposed for terahertz application. Its transmission characteristics are predicted by a compact circuit model, which has a transmission pole and zero within the frequency range of interest. The chemical potential of the graphene layers has significant influence on the central frequency and bandwidth. To improve the electrical tuning in practice, a sandwiched graphene CFSS is further proposed. The tunable central frequency and bandwidth can be achieved by changing the chemical potentials of both top and bottom graphene mesh layers simultaneously, which has been demonstrated by the full-wave simulations.
A novel graphene-based artificial magnetic conductor antenna in terahertz band

bohua gan,liang zhou,lin lin,wenyan yin,junfa mao

2014-01-01

Abstract:In this paper, we proposed a novel graphene-based artificial magnetic conductor (AMC) antenna in terahertz (THz) band. A complementary structure is used and can be tuned by applying a bias voltage in which the conductivity of graphene is tunable. An equivalent circuit model is then given to analyze the elements of this complementary structure. Both the simulated and analytical reflection phase results are presented with some agreements in different chemical potential. Further, the characteristics of a dipole antenna which is placed over the 12*12 units AMC is analyzed.
A Bandpass Graphene Frequency Selective Surface with Tunable Polarization Rotation for THz Applications

Xiang Li,Lin,Lin-Sheng Wu,Wen-Yan Yin,Jun-Fa Mao

DOI: https://doi.org/10.1109/tap.2016.2633163

IF: 5.7

2017-01-01

IEEE Transactions on Antennas and Propagation

Abstract:In order to achieve tunable polarization rotation of the transmitted wave and controllable bandpass response simultaneously, a new graphene frequency selective surface (GFSS) is proposed for terahertz applications. The GFSS is built up by sandwiching a high-resistivity Si-substrate with a graphene patch array and a graphene sheet, both of which are electromagnetically biased. The configuration is analyzed by using an equivalent tensorial surface conductivity and transmission matrices of graphene structures, which is validated by full-wave simulations. The transmission coefficient, axial ratio, and polarization rotation angle of the bandpass GFSS are captured. An observable polarization rotation angle is obtained with a relatively large transmittance, which is superior to the graphene sheet and bandstop patch-type structures. The passband frequency is found to be not sensitive to the incident angle for either TE-or TM-polarized incidence, while it can be shifted from 1.6 to 2.2 THz with the polarization rotation angle varying from 24 degrees to 16 degrees by changing the chemical potential from 0.6 to 1 eV. When the applied magnetic field is set up to 3 T, the maximum rotation angle of polarization reaches up to 30 degrees for TM incidence and 45 degrees for TE incidence while the passband remains around 2 THz.
Tunable Nanoantenna Based On Graphene

xuemei ren,wei e i sha,wallace c h choy

DOI: https://doi.org/10.1109/USNC-URSI.2013.6715357

2013-01-01

Abstract:Nanoantennas play a fundamental role in the nanotechnology due to their capabilities to confine and enhance the light through converting the localized fields to propagating electromagnetic fields, and vice versa. The characteristics of nanoantennas can be modified by carefully designing the geometric size and shape as well as choosing different materials of nanoantennas. However, the features cannot be dynamically tuned once the nanoantenna is fabricated. In the literatures, the pristine graphene has been used as a transparent electrode due to the properties of high optical transmittance and electrical conductivity. Meanwhile, due to the forbidden interband transitions by the Pauli blocking, the chemically or electrostatically doped graphene can support strong plasmonic effects particularly at the far-infrared or terahertz regime. These capabilities of dynamically modifying chemical potentials enable to fabricate controllable devices by introducing the graphene sheet.
Improved Hybrid Fdtd Method for Studying Tunable Graphene Frequency-Selective Surfaces (gfss) for Thz-Wave Applications

Yang Guo,Tian Zhang,Wen-Yan Yin,Xiang-Hua Wang

DOI: https://doi.org/10.1109/tthz.2015.2399105

IF: 3.2

2015-01-01

IEEE Transactions on Terahertz Science and Technology

Abstract:One hybrid finite-difference time-domain (FDTD) method is proposed for studying transmission characteristics of a THz wave through some tunable dispersive graphene frequency-selective surfaces (GFSSs) biased by an electrostatic or a magnetostatic field, respectively. It integrates auxiliary differential equation (ADE)-FDTD with high-order conformal FDTD (2, 4) so as to handle atomically thin periodic structures on an electrically anisotropic substrate with high flexibility and accuracy. The dispersion error and computational efficiency of the developed algorithm is validated in comparison with the piecewise linear recursive convolution (PLRC)-FDTD and commercial software HFSS, respectively. Numerical studies are further performed to demonstrate its capability for characterizing the effects of chemical potential of graphene, biasing electrostatic and magnetostatic fields, and geometrical parameters of different GFSSs on the central frequencies and 3-dB bandwidths of their passbands and stopbands. In particular, both frequency selectivity and tunability of GFSSs made of single-and double-layer periodic split-ring resonators are predicted, which can be exploited for developing some novel tunable THz structures.
Graphene–metal hybrid based reconfigurable wideband terahertz antenna with improved far-field characteristics

Vijay Kumar,Avinash Chandra,Rajkishor Kumar

DOI: https://doi.org/10.1007/s11082-024-07108-w

IF: 3

2024-06-14

Optical and Quantum Electronics

Abstract:Single or multi-layer graphene has wide applicability in microwave and THz radiating structure designs. Owing to wide frequency tunability with an external bias of graphene, this paper presents a graphene–metal hybrid (GMH) based microstrip patch antenna (MSA) design at terahertz (THz) frequencies. Eight antenna structures with rectangular patches made of copper and GMH are studied and compared. The proposed structures are designed at 0.835 THz for short-distance communication. Polytetrafluoroethylene (PTFE) substrate of the relative permittivity (ε r ) 2.1, loss tangent 0.0002 and thickness 40 μm is used. By placing the copper metamaterial (CMTM) as a parasitic element on either side of the antenna, adjacent to the microstrip feedline, the impedance matching bandwidth (BW) is improved from 0.761 THz to 1.115 THz with more than 95% of radiation efficiency throughout the range. In another similar MSA, CMTMs are replaced with graphene MTMs (GMTM) for improving the bandwidth by more than 50% along with reconfigurability. The antenna parameters such as bandwidth, gain, directivity, and radiation efficiency of the antennas with and without GMH patch are analysed. It is observed from the results that the structure with GMH gives higher bandwidth of 439 GHz, along with 8.14 dBi gain and 84.65% efficiency. By changing the chemical potential (μ c ) of graphene through external bias GMH based patch antenna is made reconfigurable. A numerical simulation of GMH and copper-based wide bandwidth, antenna for short distance communication with high data rates at THz frequency range is studied.

engineering, electrical & electronic,optics,quantum science & technology
Characteristic Mode Analysis of Graphene-Based Patch Antenna in Terahertz Regime

Khatereh Moradi,Ali Pourziad,Saeid Nikmehr

DOI: https://doi.org/10.1007/s13369-023-08580-4

IF: 2.807

2024-02-17

Arabian Journal for Science and Engineering

Abstract:In this paper, a new approach to analyzing graphene-based antennas in the terahertz frequency range using the characteristic mode analysis method is presented. By the proposed method, graphene antenna parameters are obtained with simpler analysis and better physical visibility compared to numerical methods. In this regard, two structures of a graphene-based rectangular microstrip patch antenna for resonance in the terahertz frequency range are considered. The first structure consists of a metal ground plane and a substrate on which a layer of graphene is placed instead of a 10 μm × 7 μm metal patch. The second structure includes a metal ground plane with dimensions 19 μm × 16 μm, a substrate, a graphene layer on the substrate and a 10 μm × 7 μm metal patch placed on a graphene layer. Characteristic mode analysis method has been applied to the mentioned structure with different substrates, and the effect of graphene chemical potential on the modal behavior of the structure has been analyzed. For the first structure, there are two modes in the frequency range of 1–3 THz, but they do not have good resonance and they can be considered as non-resonant mode. Due to the conductivity of graphene in low frequency range of terahertz, which causes graphene to be a dielectric in this area. For the second structure, the 7.6 THz resonant frequency corresponds to the first mode of the structure and the 10 THz resonant frequency corresponds to the second mode of the structure, respectively, in the vertically and horizontally feeding stimulated.

multidisciplinary sciences
Integrated Graphene Patch Antenna for Communications at THz Frequencies

Elana P. de Santana,Anna K. Wigger,Zhenxing Wang,Kun-Ta Wang,Max Lemme,Sergi Abadal,Peter Haring Bolivar

DOI: https://doi.org/10.1109/irmmw-thz50927.2022.9895979

2022-01-01

Abstract:Graphene is an attractive material for communications in the THz range due to its ability to support surface plasmon polaritons. This enables a graphene antenna to be smaller in size than its metallic counterpart. In addition, the possibility to control the graphene conductivity during operation by an applied bias leads to the tunability of the resonant frequency of graphene antennas. Graphene-based antennas integrated into transceivers working at THz frequencies may lead to faster and more efficient devices. In this work, we design and simulate a graphene patch antenna that can be integrated into transceivers by through-substrate vias. The tuning of the resonant frequency is also studied by simulations.
A Tunable Thz Dipole Antenna Based on Graphene

Xijia Qin,Juan Chen,Chengpeng Xie,Ning Xu,Jiepei Shi

DOI: https://doi.org/10.1109/imws-amp.2016.7588365

2016-01-01

Abstract:Recently graphene has attracted tremendous attention for its excellent properties. Numerous novel graphene-based devices have come out, showing great potential of graphene for applications at the terahertz band. In this paper, by placing monolayer graphene deposited on top of a SiO2/Si substrate, a tunable graphene-based dipole antenna owing to the voltage-controllable conductivity of graphene is obtained. The resonance frequency of the proposed antenna is blue-shift with increasing chemical potential. Furthermore, the radiation gain of the antenna can increase from 3.7dBi to 5.5dBi by adjusting the chemical potential. These simulated results will provide approaches using graphene in reconfigurable antennas.
Design Of A Novel Reconfigurable Sierpinski Fractal Graphene Antenna Operating At Thz Band

Yingying Xu,Yang Xu,Jun Hu,Wenyan Yin

DOI: https://doi.org/10.1109/APS.2013.6710947

2013-01-01

Abstract:A novel reconfigurable fractal graphene antenna model operating at THz band is presented in this paper, where the frequency-dependent property of graphene conductivity is implemented into our simulation. In the development of such Sierpinski fractal antenna with self-similarity, we use graphene to fill its slot parts so as to achieve our desired reconfigurable capability. Some numerical results are given to show the radiation performance of our proposed graphene antenna model, with experiment being done so as to verify our design.
Reconfigurable THz leaky-wave antennas based on innovative metal–graphene metasurfaces

Edoardo Negri,Walter Fuscaldo,Paolo Burghignoli,Alessandro Galli

DOI: https://doi.org/10.1088/1361-6463/ad7302

2024-08-26

Journal of Physics D Applied Physics

Abstract:Graphene ohmic losses notably hinder the efficiency of graphene-based terahertz (THz) devices. Hybrid metal–graphene structures have recently been proposed to mitigate this issue in a few passive devices, namely waveguide and Vivaldi antennas, as well as frequency selective surfaces. In this work, such a technique is extensively investigated to optimize the radiation performance of a THz Fabry–Perot cavity leaky-wave antenna based on a hybrid metal–graphene metasurface consisting of a lattice of square metallic patches interleaved with a complementary graphene strip grating. Theoretical, numerical, and full-wave results demonstrate that, by properly selecting the unit-cell features, a satisfactory trade-off among range of reconfigurability, antenna directivity, and losses can be achieved. The proposed antenna can find application in future wireless THz communications.

physics, applied
Magnetically Tunable Graphene-Based Terahertz Metasurface

Yafeng Lu,Chen Wang,Shiqiang Zhao,Yongzheng Wen

DOI: https://doi.org/10.3389/fphy.2020.622839

IF: 3.718

2021-01-25

Frontiers in Physics

Abstract:Graphene is a promising platform for configurable terahertz (THz) devices due to its reconfigurability, but most researches focus on its electrical tunability. Here, we propose a graphene-based THz metasurface comprised of graphene cut-wire arrays for magnetic manipulation of the THz wave. With the external magnetostatic field applied, the resonant currents of the graphene cut-wire can be effectively affected by the Lorentz force, leading to an evident tuning of the response of the metasurface. The simulated results fully demonstrate that the resonance frequencies of the graphene THz metasurface can be efficiently modulated under a vertical magnetostatic field bias, resulting in the manipulation of the transmittance and phase of the THz wave. As a new method of the tunable THz metasurface, our structure shows promising applications in the THz regime, including the ultracompact THz modulators and magnetic field sensors.

physics, multidisciplinary
Surface Plasmon Polaritons in Graphene Material–Based Reconfigurable Antennas for Advanced Environmental Monitoring Applications

Rajesh Yadav,Harsha Mann,V. S. Pandey,Preeti Verma

DOI: https://doi.org/10.1007/s11468-024-02422-1

IF: 2.726

2024-07-25

Plasmonics

Abstract:This paper presents surface plasmon polaritons in graphene material–based reconfigurable antennae for advanced environmental monitoring applications. The antenna consists of multiple elements which are made up of graphene material. It enhances the antenna's performance, enabling tunability and adaptability in response to environmental conditions. Additionally, the defective ground structure has been incorporated into the antenna characteristics that contribute to improving the radiation patterns and frequency selectivity. The proposed antenna is excited through a silver nanostrip feedline coupled through vias to the radiated elements. The antenna is resonating at 5.046 THz, with a bandwidth of 7.611 (5.21–4.828 THz). The reconfigurable antenna provides an acceptable limit of directivity along with high efficiency. Here, the reconfigurability is obtained by disabling and enabling the topmost radiating elements systematically. Moreover, the resonant frequency can be adjusted by modifying the external biasing voltage applied to the graphene material. The antenna generates the higher-order mode. Furthermore, a parametric analysis has been conducted to achieve impedance matching and antenna tuning by changing the external bias voltage applied to graphene elements. The proposed reconfigurable antenna system demonstrates promising capabilities for versatile environmental sensing applications including monitoring parameters such as temperature, humidity, and pollutant levels.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry, physical
Performance Improvement of a Graphene Patch Antenna using Metasurface for THz Applications

Ansuman Shubham,Diptiranjan Samantaray,Sambit Kumar Ghosh,Smrity Dwivedi,Somak Bhattacharyya

DOI: https://doi.org/10.1016/j.ijleo.2022.169412

IF: 3.1

2022-06-05

Optik

Abstract:This paper presents the design and development of a miniaturized, efficient graphene-based reconfigurable antenna working in the terahertz (THz) domain. This design puts forward the analysis of a graphene-based microstrip patch antenna loaded with a graphene metasurface (MS) as a superstrate configuration. The MS is designed over a silicon dioxide (SiO 2 ) substrate in which the square-shaped unit cells have been organized with a periodicity of λ/10.4, referred to as the lowest operating frequency. The proposed antenna operates over the lower THz frequency band of 1.44 THz to 2.84 THz; providing a bandwidth of 1.4 THz with a return loss dip of 35.54 dB at 2.02 THz. The maximally achieved realized gain and radiation efficiency at 2.74 THz are 8.91 dBi and 70.14%, respectively. The proposed antenna further exhibits the beam scanning feature over a range close to 50°. The proposed graphene-based MS structure is compact, directive, and highly efficient in the THz domain. It finds useful applications in biomedical, satellite communication, high-quality video imaging, etc.

optics
Nonsuppurative tenosynovitis secondary to foreign body migration.

J. Merrell,R. Russell,E. Zook

DOI: https://doi.org/10.1097/00006534-198602000-00071

1986-02-01

Abstract:
Beamforming of Electrically Tunable Plasmonic Graphene Strip Nanoantennas in the Terahertz, Far-Infrared, and Mid-Infrared Ranges

G. S. Makeeva

DOI: https://doi.org/10.1134/s1063784224700609

2024-07-13

Technical Physics

Abstract:—The purpose of this work is to study, using automated modeling methods, the possibility of scanning in frequency and beamforming of plasmonic graphene strip nanoantennas, which are electrically tunable by varying the chemical potential of graphene in the terahertz (THz), far-, and mid-infrared (IR) ranges. Graphene, which has exceptional electromagnetic, mechanical, electrical, and thermal properties, is promising for reconfigurable THz antennas due to its high conductivity and tunability in the THz range. Modeling of the performances of THz plasmonic graphene strip nanoantennas for various values of chemical potential was carried out using the CST Microwave Studio 2023 software package. The results of modeling the controllability of the reflection coefficients at the input of the nanoantenna and the radiation pattern (RP) at the resonance frequencies of the fundamental mode of surface plasmon-polaritons (SPPs) and the second-order SPP mode were obtained when changing the values of the chemical potential (0.3–0.7 eV) in the THz, far-, mid-IR ranges. It follows from the modeling results that it is possible to tune operating frequencies (frequency scanning) from THz to the far- and mid-IR ranges and form a multibeam RP of reconfigurable graphene strip nanoantennas by changing the chemical potential of graphene (applying an external electric field) without changing their geometry and dimensions.

physics, applied
Graphene-based Antennas for Terahertz Systems: A Review

D. Correas-Serrano,J. S. Gomez-Diaz

DOI: https://doi.org/10.48550/arXiv.1704.00371

2017-04-02

Mesoscale and Nanoscale Physics

Abstract:We review the use of graphene to develop reconfigurable, miniaturized, and efficient terahertz (THz) antennas and associated feeding networks, and attempt to identify current research trends and mid- and long-term challenges and prospects. We first discuss the state of the art in resonant, leaky-wave and reflectarray antennas, providing a critical assessment of their performance, limitations, and main challenges that remain to be addressed. Next, we examine different integrated feeding networks, including components such as switches, filters, and phase shifters, and we clarify the impact that graphene's intrinsic spatial dispersion may have in their performance. Our outlook clearly describes how graphene can bring exotic functionalities to all these devices, including quasi real-time reconfiguration capabilities and magnet-less non-reciprocal responses. Some exciting applications of THz antennas are then presented and discussed, including transceivers, biosensors, and first experimental realizations of detectors and modulators. We conclude by outlining our vision for the promising future of graphene-based THz antennas.
THz graphene-integrated metasurface for electrically reconfigurable polarization conversion

Li-Zhao Song,Andrew Squires,Timothy van der Laan,Jia Du

DOI: https://doi.org/10.1515/nanoph-2023-0916

IF: 7.5

2024-03-20

Nanophotonics

Abstract:Terahertz (THz) waves have been widely hailed as a key enabling technology for future sixth generation (6G) wireless networks. Dynamic modulation of their polarization states is of great attraction for high-capacity communications and anisotropic sensing. The development of such technology is, however, still in very early stage owing to the difficulties of realizing electrical reconfigurability for THz devices. Artificially constructed metasurfaces and new nanomaterials, such as graphene, have been shown to provide revolutionary platforms for manipulating and controlling the wave properties, especially at THz frequencies. This work leverages the light–matter interaction in a graphene-integrated metasurface functioning as an electrically reconfigurable THz polarization converter. A novel graphene-gold bilayer topology is applied to construct such a metasurface which enables wide-range electrical tunability of the polarization conversion. Under a y -polarized illumination, the reflected components of x - and y -polarizations are tuned dynamically through an external bias voltage across the metasurface, thereby producing an elliptically polarized wave with tuneable ellipticity and angle. By changing the voltage from 0 V to 12 V, the reflected polarization ellipticity has been tuned from −0.94 to −0.5 at around 240 GHz, featuring linear-to-circular and linear-to-elliptical polarization conversions. Meanwhile, the polarization angle has been modulated from 12° to −23° at around 236 GHz. This work provides an experimentally validated THz graphene-integrated metasurface with wide polarization modulation depths, low biasing voltages and simple configuration. It promises great potential for applications in future THz communications and sensing.

optics,physics, applied,materials science, multidisciplinary,nanoscience & nanotechnology

[Pain in chronic obliterating peripheral arteriopathy. Therapeutic possibilities].

Design of A Novel Graphene Terahertz Antenna at 500ghz with Reconfigurable Radiation Pattern

Reconfigurable Terahertz Leaky-Wave Antenna Using Graphene-Based High-Impedance Surface

Tunable complimentary frequency selective surface (CFSS) based on graphene for THz application

A novel graphene-based artificial magnetic conductor antenna in terahertz band

A Bandpass Graphene Frequency Selective Surface with Tunable Polarization Rotation for THz Applications

Tunable Nanoantenna Based On Graphene

Improved Hybrid Fdtd Method for Studying Tunable Graphene Frequency-Selective Surfaces (gfss) for Thz-Wave Applications

Graphene–metal hybrid based reconfigurable wideband terahertz antenna with improved far-field characteristics

Characteristic Mode Analysis of Graphene-Based Patch Antenna in Terahertz Regime

Integrated Graphene Patch Antenna for Communications at THz Frequencies

A Tunable Thz Dipole Antenna Based on Graphene

Design Of A Novel Reconfigurable Sierpinski Fractal Graphene Antenna Operating At Thz Band

Reconfigurable THz leaky-wave antennas based on innovative metal–graphene metasurfaces

Magnetically Tunable Graphene-Based Terahertz Metasurface

Surface Plasmon Polaritons in Graphene Material–Based Reconfigurable Antennas for Advanced Environmental Monitoring Applications

Performance Improvement of a Graphene Patch Antenna using Metasurface for THz Applications

Nonsuppurative tenosynovitis secondary to foreign body migration.

Beamforming of Electrically Tunable Plasmonic Graphene Strip Nanoantennas in the Terahertz, Far-Infrared, and Mid-Infrared Ranges

Graphene-based Antennas for Terahertz Systems: A Review

THz graphene-integrated metasurface for electrically reconfigurable polarization conversion