Standard SANC modules

A. Andonov,A. Arbuzov,D. Bardin,S. Bondarenko,P. Christova,L. Kalinovskaya,V. Kolesnikov,R. Sadykov

DOI: https://doi.org/10.1016/j.cpc.2009.10.004

IF: 4.717

2008-12-22

Computer Physics Communications

Abstract:

What problem does this paper attempt to address?

Ectopic and in Situ Bone Formation of Adipose Tissue-Derived Stromal Cells in Biphasic Calcium Phosphate Nanocomposite

Yunfeng Lin,Tao Wang,Ling Wu,Wei Jing,Xizhe Chen,Zhiyong Li,Lei Liu,Wei Tang,Xiaohui Zheng,Weidong Tian

DOI: https://doi.org/10.1002/jbm.a.31149

2007-01-01

Journal of Biomedical Materials Research Part A

Abstract:Adipose-derived stromal cells (ASCs) have the potential to differentiate into a variety of cell lineages both in vitro and in vivo. A novel biodegradable biphasic calcium phosphate nanocomposite (NanoBCP) comprising beta-tricalcium phosphate matrix and hydroxyl apatite nanofibers is favorable for bone tissue engineering. In this study, ASCs were harvested from Sprague-Dawley (SD) rats and induced to osteogenesis before seeded into porous NanoBCP scaffold. To determine ectopic in vivo osteogenic differentiation, these constructs were implanted in nude mice subcutaneously. Meanwhile, the ability of engineered constructs to stimulate in situ bone repair was assessed in rat critical-size cranial defects. The defects were filled with NanoBCP containing osteogenic ASCs in experimental group; with cell-free NanoBCP in negative controls; and with nothing in blank controls. The retrieved specimens were analyzed with morphological, histological, and molecular methods. Histological analysis of the retrieved specimens from nude mice in experimental group showed obvious ectopic bone formation. There were positive expression of osteopontin (OPN) and osteocalcin (OCN) at RNA and protein level. As for the cranial defects, there was complete repair in experimental group, but only partial repair in negative controls. The radiographs, H&E staining, and Masson's trichrome method showed better bone regeneration at experimental sites. Combining osteogenic ASCs with NanoBCP can lead to formation of ectopic new bone. Furthermore, the approach can also stimulate bone regeneration and repair for the large size bone defects. (c) 2007 Wiley Periodicals, Inc. J Biomed Mater Res 81A: 900-910, 2007.
A Cancellous Bone Matrix System with Specific Mineralisation Degrees for Mesenchymal Stem Cell Differentiation and Bone Regeneration

Shijie Liu,Yiyun Wang,Jian Wang,Pengcheng Qiu,Shengyu Wang,Yiling Shi,Mobai Li,Pengfei Chen,Xianfeng Lin,Xiangqian Fang

DOI: https://doi.org/10.1039/c8bm01657g

2019-01-01

Biomaterials Science

Abstract:Bone regenerative therapies have been explored using various biomaterial systems. Notably, collagen bio-mineralisation is believed to be essential for promoting bone regeneration. However, ideal bone repair materials with an appropriate mineralised matrix, superior osteogenic activity with early vascularisation, and recellularisation properties are still needed. This study aimed to develop a method to subject the decellularised cancellous bone matrix (DCBM) to ultrasound to obtain specific demineralisation to investigate the effects of DCBM with different degrees of mineralisation on proliferation and osteogenic differentiation in bone marrow-derived mesenchymal stem cells (BMSCs) and in repairing femoral bone defects in rabbits. We established an optimised native DCBM mineralisation ECM scaffold for bone regeneration. Upon complete decellularisation of the cancellous bone matrix, DCBMs with specific degrees of mineralisation were obtained. We comprehensively evaluated their bioactive components, minimal immunogenicity, ultra-micro-structural mechanical properties, and degree of mineralisation. Furthermore, specific mineralised DCBMs (obtained by low-temperature rapid ultrasound for 4 and 8 h) had prominent effects in promoting the osteogenic differentiation of BMSCs in vitro. Moreover, more newly formed trabeculae, vessels, and endochondral bone were also detected in the aforementioned groups during earlystage bone repair in vivo. The underlying mechanism might be mineralisation-related regulation and ultra-micro-structural mechanical properties. Thus, the present study shows that specific demineralised DCBM obtained under optimal conditions had superior properties to those of unmineralised or completely demineralised DCBM by promoting MSC osteogenic differentiation and initiating endochondral bone formation and de novo osteogenesis.
Combined Mesenchymal Stem Cell Sheets and Rhbmp-2-releasing Calcium Sulfate–rhBMP-2 Scaffolds for Segmental Bone Tissue Engineering

Yiying Qi,Yulu Wang,Weiqi Yan,Hang Li,Zhongli Shi,Zhijun Pan

DOI: https://doi.org/10.3727/096368911x623844

2012-01-01

Cell Transplantation

Abstract:Repair of segmental bone defects remains a major challenge for orthopedic surgeons. This study aimed to investigate whether recombinant human bone morphogenetic protein-2 (rhBMP-2)-loaded calcium sulfate (CS) combined with mesenchymal stem cell (MSC) sheets could accelerate bone regeneration in ulnar segmental defects of rabbits. In vitro, the osteogenic differentiation of MSCs cultured on rhBMP-2-loaded CS was investigated. Forty complete 1.2-cm bone defects were treated with CS (group A), rhBMP-2-loaded CS (group B), MSC sheet-wrapped CS (group C), and MSC sheet-wrapped rhBMP-2-loaded CS (group D). At 4 and 8 weeks after implantation, the samples were treated by X-ray, microcomputed tomography, and histological observation. The rhBMP-2 could be released from the rhBMP-2-loaded CS scaffolds and maintain its bioactivity. The alkaline phosphatase (ALP) of MSCs cultured on rhBMP-2-loaded CS was significantly higher than that of CS at both 7 and 14 days ( p < 0.05). The defects treated with MSC sheet-wrapped rhBMP-2-loaded CS showed significantly higher scores by X-ray analysis and more bone formation determined by both histology and microcomputed tomography than the other three groups at both 4 and 8 weeks after implantation ( p < 0.05). No significant difference in X-ray score and bone formation was found between groups B and C, both significantly higher than group A ( p < 0.05). The results suggested that MSC sheet-wrapped rhBMP-2-loaded CS may be an effective approach to promote the repair of segmental bone defects and has great potential for repairing large segmental bone defects in clinic.
Effects of a bone graft substitute consisting of porous gradient HA/ZrO 2 and gelatin/chitosan slow-release hydrogel containing BMP-2 and BMSCs on lumbar vertebral defect repair in rhesus monkey.

Rong-Xue Shao,Ren-Fu Quan,Tuo Wang,Wei-Bin Du,Gao-Yong Jia,Dong Wang,Long-Bao Lv,Cai-Yin Xu,Xi-Cheng Wei,Jin-Fu Wang,Di-Sheng Yang

DOI: https://doi.org/10.1002/term.2601

2018-01-01

Journal of Tissue Engineering and Regenerative Medicine

Abstract:Dense biomaterial plays an important role in bone replacement. However, it fails to induce bone cell migration into graft material. In the present study, a novel bone graft substitute (BGS) consisting of porous gradient hydroxyapatite/zirconia composite (PGHC) and gelatin/chitosan slow-release hydrogel containing bone morphogenetic protein 2 and bone mesenchymal stem cells was designed and prepared to repair lumbar vertebral defects. The morphological characteristics of the BGS evaluated by a scanning electron microscope showed that it had a three-dimensional network structure with uniformly distributed chitosan microspheres on the surfaces of the graft material and the interior of the pores. Then, BGS (Group A), PGHC (Group B), or autologous bone (Group C) was implanted into lumbar vertebral body defects in a total of 24 healthy rhesus monkeys. After 8 and 16weeks, anteroposterior and lateral radiographs of the lumbar spine, microcomputed tomography, histomorphometry, biomechanical testing, and biochemical testing for bone matrix markers, including Type I collagen, osteocalcin, osteopontin, basic fibroblast growth factor, alkaline phosphatase, and vascular endothelial growth factor, were performed to examine the reparative efficacy of the BGS and PGHC. The BGS displayed excellent ability to repair the lumbar vertebral defect in rhesus monkeys. Radiography, microcomputed tomography scanning, and histomorphological characterization showed that the newly formed bone volume in the interior of the pores in the BGS was significantly higher than in the PGHC. The results of biomechanical testing indicated that the vertebral body compression strength of the PGHC implant was lower than the other implants. Reverse-transcription polymerase chain reaction and western blot analyses showed that the expression of bone-related proteins in the BGS implant was significantly higher than in the PGHC implant. The BGS displayed reparative effects similar to autologous bone. Therefore, BGS use in vertebral bone defect repair appears promising.
Implementation of network traffic classifier using semi supervised machine learning approach

Vinod Mahajan,B. Verma

DOI: https://doi.org/10.1109/NUICONE.2012.6493192

2012-12-01

Abstract:Network Traffic Classification using classical techniques such as port number based and payload based is becoming very difficult because many applications use dynamic port number and encryption technique to avoid detection. To overcome the drawbacks of classical techniques various machine learning techniques were proposed. Machine learning technique faces the problem of labeled instances (in supervised learning) and time consuming manual work (in unsupervised learning). To address the above problems we proposed a semi supervised machine learning technique. The key idea of proposed technique is to build a classifier from training dataset consisting of both labeled and unlabeled instances. For experimental purpose KDD CUP 99 intrusion detection dataset and MATLAB tool is used. We evaluate and compare the performance of the classifier build with 10%, 20% and 30% labeled instances in training dataset. The result of experiments show that classifier build with 30% labeled instances in training dataset has better performance at number of clusters equals to 50.
Effect of Different Bone Grafting Materials and Mesenchymal Stem Cells on Bone Regeneration: A Micro-Computed Tomography and Histomorphometric Study in a Rabbit Calvarial Defect Model

Shiau-Ting Shiu,Wei-Fang Lee,Sheng-Min Chen,Liu-Ting Hao,Yuan-Ting Hung,Pin-Chuang Lai,Sheng-Wei Feng

DOI: https://doi.org/10.3390/ijms22158101

IF: 5.6

2021-07-28

International Journal of Molecular Sciences

Abstract:This study evaluated the new bone formation potential of micro–macro biphasic calcium phosphate (MBCP) and Bio-Oss grafting materials with and without dental pulp-derived mesenchymal stem cells (DPSCs) and bone marrow-derived mesenchymal stem cells (BMSCs) in a rabbit calvarial bone defect model. The surface structure of the grafting materials was evaluated using a scanning electron microscope (SEM). The multipotent differentiation characteristics of the DPSCs and BMSCs were assessed. Four circular bone defects were created in the calvarium of 24 rabbits and randomly allocated to eight experimental groups: empty control, MBCP, MBCP+DPSCs, MBCP+BMSCs, Bio-Oss+DPSCs, Bio-Oss+BMSCs, and autogenous bone. A three-dimensional analysis of the new bone formation was performed using micro-computed tomography (micro-CT) and a histological study after 2, 4, and 8 weeks of healing. Homogenously porous structures were observed in both grafting materials. The BMSCs revealed higher osteogenic differentiation capacities, whereas the DPSCs exhibited higher colony-forming units. The micro-CT and histological analysis findings for the new bone formation were consistent. In general, the empty control showed the lowest bone regeneration capacity throughout the experimental period. By contrast, the percentage of new bone formation was the highest in the autogenous bone group after 2 (39.4% ± 4.7%) and 4 weeks (49.7% ± 1.5%) of healing (p < 0.05). MBCP and Bio-Oss could provide osteoconductive support and prevent the collapse of the defect space for new bone formation. In addition, more osteoblastic cells lining the surface of the newly formed bone and bone grafting materials were observed after incorporating the DPSCs and BMSCs. After 8 weeks of healing, the autogenous bone group (54.9% ± 6.1%) showed a higher percentage of new bone formation than the empty control (35.3% ± 0.5%), MBCP (38.3% ± 6.0%), MBCP+DPSC (39.8% ± 5.7%), Bio-Oss (41.3% ± 3.5%), and Bio-Oss+DPSC (42.1% ± 2.7%) groups. Nevertheless, the percentage of new bone formation did not significantly differ between the MBCP+BMSC (47.2% ± 8.3%) and Bio-Oss+BMSC (51.2% ± 9.9%) groups and the autogenous bone group. Our study results demonstrated that autogenous bone is the gold standard. Both the DPSCs and BMSCs enhanced the osteoconductive capacities of MBCP and Bio-Oss. In addition, the efficiency of the BMSCs combined with MBCP and Bio-Oss was comparable to that of the autogenous bone after 8 weeks of healing. These findings provide effective strategies for the improvement of biomaterials and MSC-based bone tissue regeneration.

biochemistry & molecular biology,chemistry, multidisciplinary
Three-dimensional printed polylactic acid and hydroxyapatite composite scaffold with urine-derived stem cells as a treatment for bone defects

Duan, Xin

DOI: https://doi.org/10.1007/s10856-022-06686-z

2022-10-04

Abstract:Bone defects still pose various challenges in osteology. As one treatment method for bone defects, tissue engineering requires biomaterials with good biocompatibility and stem cells with good differentiation. This study aimed to fabricate a 3D-printed polylactic acid and hydroxyapatite (PLA/HA) composite scaffold with urine-derived stem cells (USCs) to study its therapeutic effect in a rat model of skull defects. USCs were isolated and extracted from the urine of healthy adult males and inoculated onto PLA/HA and PLA scaffolds fabricated by 3D printing technology. A total of 36 skull defect models in eighteen Sprague–Dawley rats were randomly divided into a control group (no treatment of the defects), PLA group (treated with PLA scaffolds with USCs), and PLA/HA group (treated with PLA/HA scaffolds with USCs). The therapeutic efficacy was evaluated by real-time PCR, microcomputed tomography (micro-CT), and immunohistochemistry at 4, 8, and 12 weeks. We found that the PLA/HA scaffold loaded with USCs effectively promoted new bone regeneration in the defect area. CT images showed that in the PLA/HA group, the defect area was almost entirely covered by newly formed bone (coverage of 96.7 ± 1.6%), and the coverage was greater than that in the PLA group (coverage of 74.6 ± 1.9%) at 12 weeks. Histology and immunohistochemical staining showed the highest new bone formation on the PLA/HA scaffolds containing USCs in the defect site at 12 weeks. These findings demonstrate the broad application prospects of PLA/HA scaffolds with USCs in bone tissue engineering.
Mesenchymal Stem Cells of Different Origin-Seeded Bioceramic Construct in Regeneration of Bone Defect in Rabbit

Swapan Kumar Maiti,M. U. Shivakumar,Divya Mohan,Naveen Kumar,Karam Pal Singh

DOI: https://doi.org/10.1007/s13770-018-0129-7

2018-07-10

Tissue Engineering and Regenerative Medicine

Abstract:BACKGROUND:Stem cell is currently playing a major role in the treatment of number of incurable diseases via transplantation therapy. The objective of this study was to determine the osteogenic potential of allogenic and xenogenic bone-derived MSC seeded on a hydroxyapatite (HA/TCP) bioceramic construct in critical size bone defect (CSD) in rabbits.METHODS:A 15 mm long radial osteotomy was performed unilaterally in thirty-six rabbits divided equally in six groups. Bone defects were filled with bioscaffold seeded with autologous, allogenic, ovine, canine BMSCs and cell free bioscaffold block in groups A, B, C, D and E respectively. An empty defect served as the control group.RESULTS:The radiological, histological and SEM observations depicted better and early signs of new bone formation and bridging bone/implant interfaces in the animals of group A followed by B. Both xenogenous MSC-HA/TCP construct also accelerated the healing of critical sized bone defect. There was no sign of any inflammatory reaction in the xenogenic composite scaffold group of animals confirmed their well acceptance by the host body.CONCLUSION:In vivo experiments in rabbit CSD model confirmed that autogenous, allogenous and xenogenous BMSC seeded on bioscaffold promoted faster healing of critical size defects. Hence, we may suggest that BMSCs are suitable for bone formation in fracture healing and non-union.

engineering, biomedical,cell & tissue engineering
Micro-CT-based bone ceramic scaffolding and its performance after seeding with mesenchymal stem cells for repair of load-bearing bone defect in canine femoral head.

Jiang Peng,Cunyi Wen,Aiyuan Wang,Yu Wang,Wenjing Xu,Bin Zhao,Li Zhang,Shibi Lu,Ling Qin,Quanyi Guo,Limin Dong,Jiemo Tian

DOI: https://doi.org/10.1002/jbm.b.31770

2011-01-01

Abstract:Osteonecrosis of the femoral head is a debilitating and painful orthopedic condition characterized by joint collapse. Salvage of the femoral head is highly desirable to preserve the contour and mechanical properties and prevent joint collapse. This study aimed to develop a new tissue-engineering approach for treatment of large bone defect in femoral head, that is, after osteonecrosis. The biphasic calcium phosphate (BCP) ceramic scaffolds were fabricated by a 3D gel-lamination technique based on micro-computed tomography (micro-CT) images of the cancellous bone microarchitecture of femoral heads. After seeding with autologous bone marrow-derived mesenchymal stem cells (BMSCs) in vitro, the cell-scaffold composite was implanted into a bone defect surgically induced in canine femoral head via trapdoor procedure, which was a common procedure for treatment of osteonecrosis. A total of 24 adult dogs were randomly divided into three groups (n = 8 each) for implantation of the BCP scaffold with or without with BMSCs, and also the autologous bone chips for comparisons. All animals were sacrificed at 30 weeks postoperatively and processed for radiological and histological evaluations. The contour of the femoral head was well preserved with implantation of BCP scaffolds with or without BMSCs, whereas joint collapse was found after treatment with autologous bone chips. The osteointegration and new bone formation was significantly greater with BCP scaffold implantation with than without BMSC seeding and showed greater strength and compressive modulus in the repair Site. Micro-CT-based bone ceramic scaffolds seeding with BMSC might be a promising way to repair bone defects in the femoral head. (C) 2010 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 96B: 316-325, 2011.
β-TCP scaffolds seeded with human umbilical cord mesenchymal stem cells improve bone regeneration of radial segmental bone defects in rabbits

LV Peng-fei,WANG Yan-qiang,LIU Zheng,YU Ming-chuan,FEI Sheng-min,ZHANG Guang-wu

DOI: https://doi.org/10.3969/cma.j.issn.1674-0785.2013.14.058

2013-01-01

Abstract:Objective To explore the multiple differentiation of human umbilical cord mesenchymal stromal cells(UCMSCs) in vitro and their impact on bone regeneration process of radial segmental bone defects in rabbits, so as to study their feasibility of being as seed cells of tissue engineering. Methods USMSCs were cultured in vitro and induced to differentiate into osteocytes, chondrocytes and adipocytes by using the media containing dexamethasone, transforming growth factor and 3-isobutyl-1-methylxanthine, then staining were performed. Segmental bone defects were made in the radius of rabbits,the experimental group were implanted with β-TCP scaffolds seeded with human umbilical cord mesenchymal stem cells,while the control group were implanted with simple β-TCP scaffolds, X ray and HE staining were evaluated after 3 months and the CT values were detected at 1, 2 and 3 month. Results UCMSCs proliferated actively and exhibited spindle-shaped morphology in vitro, alkaline phosphatase(ALP)staining, osteocalcin(OCN)immunocytochemical staining, osteopontin(OPN) immunocytochemical staining, alizarin red staining, safranin O staining, alcian blue staining and oil red O staining were positive. The X ray result displayed that there were connections between materials and bones in both experimental and control group, HE staining showed new bone tissue in experimental group, while the control group were filled with fibrous connective tissue, the CT values of the experimental group was lower than control group at 1 and 2 month(P<0.05), but there was no difference between two group at 3 month(P>0.05). Conclusion UCMSCs have multiple differentiation properties, and can improve bone regeneration process of radial segmental bone defects in rabbits, they are optimal cell source for tissue engineering.
The effects of oyster shell/alpha-calcium sulfate hemihydrate/platelet-rich plasma/bone mesenchymal stem cells bioengineering scaffold on rat critical-sized calvarial defects

Jinwu Wang,Linzhen Xie,Xingyu Wang,Wenhao Zheng,Hua Chen,Leyi Cai,Long Chen

DOI: https://doi.org/10.1007/s10856-020-06441-2

2020-10-31

Abstract:Engineering scaffolds combining natural biomineral and artificially synthesized material hold promising potential for bone tissue regeneration. We fabricated a bioengineering scaffold, oyster shell (OS) and alpha-calcium sulfate hemihydrate (α-CSH) as scaffold, platelet-rich plasma (PRP) as provider of growth factors and bone mesenchymal stem cells (BMSCs) as seed cells, and determined it could be applied as a new type of bone graft substitutes by rat calvarial defects repairing experiment in vitro and in vivo. SEM showed that the mean diameter of the pores was about 150 μm with a range of 50–200 μm, and scaffold's porosity was ~27.4% by Archimedes' Principle. In vitro, Scaffold + BMSCs + PRP group presented a higher ALP activity compared with other groups by ELISA (P < 0.05). But the expression of OC was not detectable on day 4 or 8. The MTT assay showed that the relative cell number of BMSCs+PRP group increased significantly (P < 0.05). In vivo, the smallest defect area of skull and highest volume of regenerated new bone were observed in Scaffold + PRP + BMSCs group by X-ray and Micro-CT analysis (P < 0.05). And the similar results also were observed in HE and Masson staining. The immunohistochemistry staining for osteogenic marker proteins ALP and OC showed that the most obvious positive staining was observed in Scaffold + PRP + BMSCs group (P < 0.05). The expression of inflammatory markers IL-6 and TNF-α was the lowest in control group (P < 0.05). In conclusion, a bioengineering scaffold based on OS, created by simply combining α-CSH and PRP and implanting with BMSCs, could be clinically useful and has marked advantages as a targeted, off-the-shelf, cell-loaded treatment option for the bone healing of critical-size calvarial defects.

engineering, biomedical,materials science, biomaterials
Porous bioceramic beta-tricalcium phosphate combined with bone marrow mesenchymal stem cells in the repair of osteonecrosis of the femoral head model: An ultrastructure observation

Wei Sun,Zi-rong Li,Bai-liang Wang,Jiang-qun Wu,Zhen-cai Shi,Shao-hui Shi,Bingli Liu,Feng-chao Zhao

2009-01-01

Abstract:Background: The repair of bone defect in osteonecrosis of femoral head is difficult, and the ultrastructure of the osteogenic process porous bioceramic β-tricalcium phosphate (β-TCP) combined with bone marrow mesenchymal stem cells (BMSCs) in vivo still remains unclear. Objective: To observe the ultrastructure of the repair of porous bioceramic β-TCP combined with BMSCs in osteonecrosis of femoral head model, to test the osteogenesis during the repairing process, and to verify the feasibility that porous bioceramic β-TCP is an excellent scaffold of tissue engineering. Design, time and setting: A randomized controlled research on animals was performed in Bone Circulation and Osteonecrosis Laboratory of China-Japan Friendship Hospital from February to August in 2008. Materials: Rabbit BMSCs were cultured in vitro, and then combined with the porous bioceramic β-TCP for 2 weeks. Methods: Thirty New Zealand white rabbits were divided into three groups. Subsequent to the establishment of osteonecrosis of femoral head model, blank control group received no padding, β-TCP group was transplanted with β-TCP, and β-TCP + BMSCs group was transplanted with the compound of the two. Main outcome measures: The compound of β-TCP with BMSCs was observed under environmental scanning electron microscope; The specimens were collected postoperative 6 and 12 weeks, and the ultrastructure in the repair of β-TCP combined with BMSCs was observed by electron microscope and the substitution of osteogenesis and material degradation was also investigated. Results: The BMSCs could adhere, grow, proliferate and differentiate in porous bioceramic β-TCP. Both 6 and 12 weeks postoperatively, fibrous tissue was still found in the defect area of blank control group whereas no bone trabecula was observed. In the β-TCP group, the material began to degrade and not clear with matrix 6 weeks postoperatively, the material was identical with periphery area 12 weeks postoperatively and porous frame structure began to disappear. In the β-TCP + BMSCs group, new bone formed at 6 postoperative weeks, the parallel trabecularism formed and the degradation was obvious. A lot of osteoblasts were found in the periphery area. Compared with blank control group, the repairing and osteogenesis effect was better in other two groups, especially in the β-TCP + BMSCs group. Conclusion: Porous bioceramic β-TCP is a fine scaffold of tissue engineering, easy to combine with BMSCs, and suitable for repairing of bone defect in osteonecrosis of femoral head.
An Innovative Approach for Enhancing Bone Defect Healing Using PLGA Scaffolds Seeded with Extracorporeal-shock-wave-treated Bone Marrow Mesenchymal Stem Cells (BMSCs)

Youbin Chen,Jiankun Xu,Zhonglian Huang,Menglei Yu,Yuantao Zhang,Hongjiang Chen,Zebin Ma,Haojie Liao,Jun Hu

DOI: https://doi.org/10.1038/srep44130

IF: 4.6

2017-03-08

Scientific Reports

Abstract:Although great efforts are being made using growth factors and gene therapy, the repair of bone defects remains a major challenge in modern medicine that has resulted in an increased burden on both healthcare and the economy. Emerging tissue engineering techniques that use of combination of biodegradable poly-lactic-co-glycolic acid (PLGA) and mesenchymal stem cells have shed light on improving bone defect healing; however, additional growth factors are also required with these methods. Therefore, the development of novel and cost-effective approaches is of great importance. Our in vitro results demonstrated that ESW treatment (10 kV, 500 pulses) has a stimulatory effect on the proliferation and osteogenic differentiation of bone marrow-derived MSCs (BMSCs). Histological and micro-CT results showed that PLGA scaffolds seeded with ESW-treated BMSCs produced more bone-like tissue with commitment to the osteogenic lineage when subcutaneously implanted in vivo, as compared to control group. Significantly greater bone formation with a faster mineral apposition rate inside the defect site was observed in the ESW group compared to control group. Biomechanical parameters, including ultimate load and stress at failure, improved over time and were superior to those of the control group. Taken together, this innovative approach shows significant potential in bone tissue regeneration.

multidisciplinary sciences
Mesenchymal stem cells-seeded bio-ceramic construct for bone regeneration in large critical-size bone defect in rabbit

Swapan Kumar Maiti,Ajantha Ravindran Ninu,Palakkara Sangeetha,Dayamon D Mathew,Paramasivam Tamilmahan,Deepika Kritaniya,Naveen Kumar,Jurgen Hescheler

DOI: https://doi.org/10.46582/jsrm.1202013

2016-11-29

Journal of Stem Cells and Regenerative Medicine

Abstract:Bone marrow derived mesenchymal stem cells (BMSC) represent an attractive cell population for tissue engineering purpose. The objective of this study was to determine whether the addition of recombinant human bone morphogenetic protein (rhBMP-2) and insulin-like growth factor (IGF-1) to a silica-coated calcium hydroxyapatite (HASi) - rabbit bone marrow derived mesenchymal stem cell (rBMSC) construct promoted bone healing in a large segmental bone defect beyond standard critical -size radial defects (15mm) in rabbits. An extensively large 30mm long radial ostectomy was performed unilaterally in thirty rabbits divided equally in five groups. Defects were filled with a HASi scaffold only (group B); HASi scaffold seeded with rBMSC (group C); HASi scaffold seeded with rBMSC along with rhBMP-2 and IGF-1 in groups D and E respectively. The same number of rBMSC (five million cells) and concentration of growth factors rhBMP-2 (50µg) and IGF-1 (50µg) was again injected at the site of bone defect after 15 days of surgery in their respective groups. An empty defect served as the control group (group A). Radiographically, bone healing was evaluated at 7, 15, 30, 45, 60 and 90 days post implantation. Histological qualitative analysis with microCT (µ-CT), haematoxylin and eosin (H & E) and Masson's trichrome staining were performed 90 days after implantation. All rhBMP-2-added constructs induced the formation of well-differentiated mineralized woven bone surrounding the HASi scaffolds and bridging bone/implant interfaces as early as eight weeks after surgery. Bone regeneration appeared to develop earlier with the rhBMP-2 constructs than with the IGF-1 added construct. Constructs without any rhBMP-2 or IGF-1 showed osteoconductive properties limited to the bone junctions without bone ingrowths within the implantation site. In conclusion, the addition of rhBMP-2 to a HASi scaffold could promote bone generation in a large critical-size-defect.
Restoration of Critical-Sized Defects in the Rabbit Mandible Using Autologous Bone Marrow Stromal Cells Hybridized with Nano-β-tricalcium Phosphate/Collagen Scaffolds

Xuehui Zhang,Mingming Xu,Xinggang Liu,Feng Zhang,Yan Wei,Meng Si,Xianzhong Dai,Aizhu Duan,Xuliang Deng

DOI: https://doi.org/10.1155/2013/913438

IF: 3.791

2013-01-01

Journal of Nanomaterials

Abstract:Nano- β -tricalcium phosphate/collagen (n- β -TCP/Col) is considered with good osteoconductivity. However, the therapeutic effectiveness of n- β -TCP/Col scaffolds in combination with autologous bone marrow stromal cells (BMSCs) remains to be elucidated for the repair of critical-sized bone defects. In this study, we found that n- β -TCP/Col scaffolds exhibited high biocompatibility in vitro . The introduction of BMSCs expanded in vitro to the scaffolds dramatically enhanced their efficiency to restore critical-sized bone defects, especially during the initial stage after implantation. Collectively, these results suggest that autologous BMSCs in n- β -TCP/Col scaffolds have the potential to be applied in bone tissue engineering.
Bone Regeneration with BMP-2 Gene-modified Mesenchymal Stem Cells Seeded on Nano-hydroxyapatite/Collagen/Poly(L-Lactic Acid) Scaffolds

J. L. Dong,L. X. Li,W. D. Mu,Y. H. Wang,D. S. Zhou,W. Hao,D. B. Zou,K. Hu,J. Li,F. Z. Cui

DOI: https://doi.org/10.1177/0883911510380436

2010-01-01

Journal of Bioactive and Compatible Polymers

Abstract:In this study, the capacity of bone morphogenetic protein 2 (BMP-2) gene-transfected bone marrow-derived mesenchymal stem cells (MSCs) in combination with nano-hydroxyapatite/collagen/poly(L-lactic acid) (nHAC/ PLA) to improve the repair of bone defects in rabbit was explored. MSCs from New Zealand White rabbits were cultured and injected with pIRES2-EGFP-hBMP-2 or pIRES2-EGFP by electroporation. After the transfer efficiency was determined through the expression of EGFP, the MSCs were seeded on scaffolds to generate an in vitro 3D cell/scaffold construct. The adhesion and proliferation of the MSCs cultured in the scaffold was assessed by SEM. The cellular constructs obtained were allografted into the 15mm critical-sized segmental bone defects in the radius of New Zealand White rabbits for 12 weeks. The bone regeneration was assessed by radiographical and histological analyses. In vitro, nHAC/PLA facilitated MSC adhesion and proliferation on the scaffold, and gene transfer efficiency reached a maximum of 35.5 +/- 3.8%. In vivo, the implantation of BMP-2 transfected MSCs/nHAC/PLA construct significantly enhanced the formation of new bone in the segmental defect, compared to the control groups. This novel 3D BMP-2 transfected MSCs/nHAC/PLA construct has the potential for bone repair by genetic tissue engineering approach.
Vascularized artificial bone constructed by co-seeding mesenchymal stem cells and endothelial cells induced therefrom in repair of large segmental bone defects: experiment with rabbit

Hong LIN,Wen-da DAI,Tao-lin FANG,Jian DONG

DOI: https://doi.org/10.3321/j.issn:0376-2491.2008.05.014

2008-01-01

Abstract:Objectlve To study the ability to repair large segmental bone detects of vasculanzed bone of tissue engineering constructed by co-seeding mesenchymal stem cells(MSCs)and endothelial cells (ECs)induced from the MSCs in porous β-tricalcium phosphate(TCP).Methods Rabbit MSCs were obtained,cuhured,and induced to differentiate into ECs. 1.5 cm ulna diaphyseal defects were made bilaterally in 32 rabbits.The 64 bone defects were randomly divided into 4 equal groups Group A:without treatment,Group B,implanted with β-TCP,Group C,implanted with tissue-engineered bone(MSCs+β-TCP),and Group D,implanted with vascularized bone of tissue engineering(MSCs+ECs+β-TCP).Xray and ECT examination,HE staining of tissue slices of the implants,and biomechanical test of the specimens were carried out 4,8,12,and 16 weeks postoperatively to evaluate the repairing effect of the bone defects and vascularization of the implants.Results The bone defects of Group A showed little trace of osteogenesis.The bone defects of Group D showed a more perfect repairing effect and vasculanzation of implants than Group C.Conclusion The vascularized bone of tissue engineering constructed by MSCs and ECs induced from MSCs co-seeded in porous β-TCP can accelerate the vascularization and osteogenesis process of the implants,and is more effective in repairing large segmental bone defects.
Poly (acrylic acid)/tricalcium phosphate nanoparticles scaffold enriched with exosomes for cell-free therapy in bone tissue engineering: An in vivo evaluation

Nahid Moradi,Mina Soufi-Zomorrod,Simzar Hosseinzadeh,Masoud Soleimani

DOI: https://doi.org/10.34172/bi.2023.27510

Bioimpacts

Abstract:Introduction: This study aimed to assess the potential of poly (acrylic acid)/tricalcium phosphate nanoparticles (PAA/triCaPNPs) scaffold in terms of biocompatibility and osteoconductivity properties the in-vivo evaluation as well as to investigate the performance of PAA/triCaPNPs scaffold (with or without exosomes derived from UC-MSCs) for bone regeneration of rat critical-sized defect. Methods: PAA/triCaPNPs scaffold was made from acrylic acid (AA) monomer, N,N'-methylenebisacrylamide (MBAA), sodium bicarbonate (SBC), and ammonium persulfate (APS) through freeze-drying method. For in vivo evaluation, we randomly divided 24 rats into three groups. The rat calvarial bone defects were treated as follows: (1) Control group: defects without any treatment, (2) scaffold group: defects treated with scaffold only, (3) scaffold+exo group: defects treated with scaffold enriched with exosomes (1 μg/μL, 150 μg per rat). Eight- and 12-weeks post-surgery, half of the animals were sacrificed and bone regeneration was examined through micro-computerized tomography (µ-CT), histological staining, and immunohistochemistry (IHC). Results: Quantitative analysis based on µ-CT scan images at 8 and 12 weeks post-implantation clearly indicated that healing rate for defects that were filled with scaffold enriched with exosome was significantly higher than defects filled with scaffold without exosome. The H&E and Masson staining results revealed that more new bone-like form developed in the scaffold+exo group than that in control and scaffold groups. Further, IHC staining for osteocalcin and CD31 confirmed that more bone healing in the scaffold+exo group at 12 weeks could be associated with osteogenesis and angiogenesis concurrently. Conclusion: In the present study, we aimed to investigate the therapeutic potential of PAA/triCaPNPs scaffold as a carrier of human UC-MSC-derived exosome to achieve the exosome-controlled release on calvarial bone defect. The in vivo results indicated that the exosome-enriched scaffold could effectively minify the defect area and improve the bone healing in rat model, and as such it could be an option for exosome-based therapy.
Enhanced Critical-Sized Bone Defect Repair Efficiency by Combining Deproteinized Antler Cancellous Bone and Autologous BMSCs

Jin-Qi Wei,Yun Liu,Xue-Hui Zhang,Wei-Wei Liang,Tuan-Feng Zhou,Hua Zhang,Xu-Liang Deng

DOI: https://doi.org/10.1016/j.cclet.2017.01.008

IF: 9.1

2017-01-01

Chinese Chemical Letters

Abstract:Previously we have demonstrated that calcinated antler cancellous bone (CACB) has great potential for bone defect repair, due to its highly similar composition and architecture to natural extracellular bone matrix. This study is aiming at seeking for an optimal strategy of combined application of CACB and bone marrow mesenchymal stem cells (BMSCs) in bone defect repair. In vitro study demonstrated that CACB promoted the adhesion, spreading and viability of BMSCs. Increased extracellular matrix production and expression of osteogenic markers in BMSCs were observed when seeded on CACB scaffolds. The cells ceased to proliferation in the dual effect of CACB and osteogenic induction at the early stage of incubation. Hence synergistic effect of CACB combined with autologous undifferentiated BMSCs in rabbit mandible critical-sized defect repair was further evaluated. Histological analysis results showed that loading the CACB with autologous BMSCs resulted in enhanced new bone formation and angiogenesis when compared with implanted CACB alone. These findings indicate that the combination of CACB and autologous BMSCs should become potential routes to improve bone repair efficiency
The Osteogenic Potential of Stem Cell- and Bmp2 Gene-Activating Bioceramic in Vivo

W Yan,J Feng,Q Chen,D Yang,Y Zhao,S Yan

DOI: https://doi.org/10.4028/www.scientific.net/kem.284-286.941

2005-01-01

Key Engineering Materials

Abstract:Stimulation of bone healing through local application of growth factors from implants may improve the clinical outcome in fracture treatments. However, the growth factors in reconstructive application require supraphysiologic dosing and considerable expense while hampering their clinical application. Genetic modification of mesenchymal stem cells (MSCs) to both produce and respond to osteogenic factors may have potential for use in enhancing bone healing. In this study, MSCs were genetically modified by a recombinant adenoviral containing the gene for human bone morphogenetic protein 2 (hBMP-2). The gene-transduced cells were incorporated with a porous beta-tricalcium. phosphate (TCP) as a novel complex. We investigated osteogeneic potential of gene-transduced MSCs/ceramic and the ability of the complex on facilitating bone formation in a radius segmental defect of rabbits. In vitro results showed that there were apparent hBMP2 gene expression and protein synthesis in MSCs with hBMP2 stably transfection, whereas negative expression of hBMP2 in controls. Histological studies demonstrated that gene-transfected MSCs/ceramic composite appeared an ability of heterotopic osteogenesis. In the segmental bone defects, endochondrial ossification at fracture sites was found in both transfected and untransfected MSCs-ceramic composites. While the composite with hBMP2 transfection showed the earliest and the most effective healing of the segmental bone defects both radiographically and morphologically. Our results show that genetically modified MSCs/ceramics had enhanced osteogeneic capacity relative to unmodified MSCs or only ceramic implants. This study suggests that use of cell-and gene-activated bioceramics may offer promise for molecular design of implants to induce osteogenesis and enhance bone regeneration.

Standard SANC modules

Ectopic and in Situ Bone Formation of Adipose Tissue-Derived Stromal Cells in Biphasic Calcium Phosphate Nanocomposite

A Cancellous Bone Matrix System with Specific Mineralisation Degrees for Mesenchymal Stem Cell Differentiation and Bone Regeneration

Combined Mesenchymal Stem Cell Sheets and Rhbmp-2-releasing Calcium Sulfate–rhBMP-2 Scaffolds for Segmental Bone Tissue Engineering

Effects of a bone graft substitute consisting of porous gradient HA/ZrO 2 and gelatin/chitosan slow-release hydrogel containing BMP-2 and BMSCs on lumbar vertebral defect repair in rhesus monkey.

Implementation of network traffic classifier using semi supervised machine learning approach

Effect of Different Bone Grafting Materials and Mesenchymal Stem Cells on Bone Regeneration: A Micro-Computed Tomography and Histomorphometric Study in a Rabbit Calvarial Defect Model

Three-dimensional printed polylactic acid and hydroxyapatite composite scaffold with urine-derived stem cells as a treatment for bone defects

Mesenchymal Stem Cells of Different Origin-Seeded Bioceramic Construct in Regeneration of Bone Defect in Rabbit

Micro-CT-based bone ceramic scaffolding and its performance after seeding with mesenchymal stem cells for repair of load-bearing bone defect in canine femoral head.

β-TCP scaffolds seeded with human umbilical cord mesenchymal stem cells improve bone regeneration of radial segmental bone defects in rabbits

The effects of oyster shell/alpha-calcium sulfate hemihydrate/platelet-rich plasma/bone mesenchymal stem cells bioengineering scaffold on rat critical-sized calvarial defects

Porous bioceramic beta-tricalcium phosphate combined with bone marrow mesenchymal stem cells in the repair of osteonecrosis of the femoral head model: An ultrastructure observation

An Innovative Approach for Enhancing Bone Defect Healing Using PLGA Scaffolds Seeded with Extracorporeal-shock-wave-treated Bone Marrow Mesenchymal Stem Cells (BMSCs)

Mesenchymal stem cells-seeded bio-ceramic construct for bone regeneration in large critical-size bone defect in rabbit

Restoration of Critical-Sized Defects in the Rabbit Mandible Using Autologous Bone Marrow Stromal Cells Hybridized with Nano-β-tricalcium Phosphate/Collagen Scaffolds

Bone Regeneration with BMP-2 Gene-modified Mesenchymal Stem Cells Seeded on Nano-hydroxyapatite/Collagen/Poly(L-Lactic Acid) Scaffolds

Vascularized artificial bone constructed by co-seeding mesenchymal stem cells and endothelial cells induced therefrom in repair of large segmental bone defects: experiment with rabbit

Poly (acrylic acid)/tricalcium phosphate nanoparticles scaffold enriched with exosomes for cell-free therapy in bone tissue engineering: An in vivo evaluation

Enhanced Critical-Sized Bone Defect Repair Efficiency by Combining Deproteinized Antler Cancellous Bone and Autologous BMSCs

The Osteogenic Potential of Stem Cell- and Bmp2 Gene-Activating Bioceramic in Vivo