Abstract:Among various energy storage/conversion systems, lithium-sulfur batteries are considered as one of the most promising candidate due to not only very high theoretical energy density of 2600 Wh kg-1 (based on lithium-sulfur redox couple) and wide operating temperature range benefiting from its unique multiple-electron-transfer chemistry, but also abundant reserves and environmental friendliness of sulfur. However, several intrinsic obstacles should be overcome for its applicably extension, including the ultra-low electrical conductivity of sulfur and its lithiated products, huge volumetric changes during charge and discharge, and the shuttling mechanism of soluble intermediate polysulfides. Here, a hierarchical nanostructured carbon/sulfur hybrid in which the porous carbon was in situ integrated into graphene/single-walled carbon nanotube (SWCNT) hybrid matrix with small cyclo-S8 molecule clusters was fabricated as advanced cathode material for lithium-sulfur battery application. The sp2 graphene/SWCNT hybrid interlinked framework was served as robust conductive scaffold with good electrical conductivity and structure stability, while the micro-/mesoporous carbon accommodated sulfur and lithium polysulfides, provided accessibility for liquid electrolyte to active material, and suppress the shuttle behavior due to the spacial confinement. Therefore, such hierarchical all-carbon nanostructure hybridized with small cyclo-S8 molecule clusters obtained an excellent electrochemical performance including an ultrahigh specific capacity of 1121 mAh g-1 at 0.5 C, a favorable high-rate capability of 809 mAh g-1 at 10 C, a very low capacity decay of 0.12 % per cycle, and an impressive cycling stability of 877 mAh g-1 after 150 cycles at 1 C. As sulfur loading increasing from 50 wt % to 77 wt %, high capacities of 970, 914, and 613 mAh g-1 were still available at current densities of 0.5, 1, and 5 C respectively. Based on the total mass of packaged devices, gravimetric energy density of GSH@APC-S//Li cell was expected to be 400 Wh kg-1 at a power density of 10000 W kg-1, matching the level of engine driven systems. Reference: [1] HJ Peng, et al. Adv. Funct. Mater., 2014, DOI: 10.1002/adfm.201303296

Sulfur-rich Graphdiyne-Containing Electrochemical Active Tetrathiafulvalene for Highly Efficient Lithium Storage Application

3D Net-like GO-d-Ti3C2Tx MXene Aerogels with Catalysis/Adsorption Dual Effects for High-Performance Lithium-Sulfur Batteries

Enveloping ultrathin Ti<sub>3</sub>C<sub>2</sub> nanosheets on carbon fibers: a high-density sulfur loaded lithium-sulfur battery cathode with remarkable cycling stability

Three-Dimensional Double-Walled Ultrathin Graphite Tube Conductive Scaffold with Encapsulated Germanium Nanoparticles as a High-Areal-Capacity and Cycle-Stable Anode for Lithium-Ion Batteries

Two-dimensional organic-inorganic heterostructures of in situ-grown layered COF on Ti3C2 MXene nanosheets for lithium-sulfur batteries

3D Holey Graphene/Polyacrylonitrile Sulfur Composite Architecture for High Loading Lithium Sulfur Batteries

Three-dimensional Carbon Framework As High-Proportion Sulfur Host for High-Performance Lithium-Sulfur Batteries

Synthesis of biphenyl-linked covalent triazine frameworks with excellent lithium storage performance as anode in lithium ion battery

Ultrathin Dendrimer-Graphene Oxide Composite Film For Stable Cycling Lithium-Sulfur Batteries

Ultradispersed titanium dioxide nanoparticles embedded in a three-dimensional graphene aerogel for high performance sulfur cathodes

TiN nanocrystal anchored on N-doped graphene as effective sulfur hosts for high-performance lithium-sulfur batteries

A Dual‐Functional Conductive Framework Embedded with TiN‐VN Heterostructures for Highly Efficient Polysulfide and Lithium Regulation toward Stable Li–S Full Batteries

Two-dimensional square metal organic framework as promising cathode material for lithium-sulfur battery with high theoretical energy density

Defective TiO2-graphene heterostructures enabling in-situ electrocatalyst evolution for lithium-sulfur batteries

A High‐energy‐density Long‐cycle Lithium–sulfur Battery Enabled by 3D Graphene Architecture

Covalent Triazine Based Frameworks with Donor‐Donor‐π‐Acceptor Structures for Dendrite‐Free Lithium Metal Batteries

Ultrathin TiO2 surface layer coated TiN nanoparticles in freestanding film for high sulfur loading Li-S battery

Combined enhanced redox kinetics and physiochemical confinement in three-dimensionally ordered macro/mesoporous TiN for highly stable lithium–sulfur batteries

Capturing Polysulfides with a Functional Anhydride Compound for Lithium–Sulfur Batteries

Hierarchical Nanostructured Carbon/Sulfur Hybrid Cathode for High-Performance Lithium-Sulfur Battery

3D Mesoporous Graphene: CVD Self-Assembly on Porous Oxide Templates and Applications in High-Stable Li-S Batteries.