Abstract:This paper introduces a new formulation of limit analysis based on nodal integrations for calculating static and seismic collapse loads in geotechnical engineering. Unlike the classical kinematic limit analysis, our newly proposed formulation of upper-bound limit analysis using mixed elements is expressed in terms of the stress fields rather than displacement fields. The numerical framework approximates stress and velocity fields using low-order triangular elements with a strain smoothing technique. Subsequently, the weak form of the equilibrium conditions and flow rule are imposed over nodal smoothing cells rather than elements. The final form of stress mixed formulation is established on nodal smoothing cells and is cast as a set of conic constraints, allowing the stress fields to be directly determined using conic programming algorithms. Additionally, the determination of kinematically admissible displacement fields is achieved through duality theory. We demonstrate the robustness and accuracy of our numerical scheme through benchmark examples involving static and seismic collapse loads, such as bearing capacity and tunnel stability, showcasing its practical application. Although the proposed scheme outperforms other traditional numerical schemes and smoothed limit analysis in terms of accuracy and efficiency, the gain in performance is offset by a loss of rigour. Furthermore, we incorporate a simple non-associated plasticity scheme into the analyses to assess dilation-dependent collapse loads. The newly proposed numerical scheme of the stress-based upper-bound limit analysis is then utilised to assess the influence of the dilation on the static and seismic collapse loads and their failure mechanism, giving some valuable insights into the dilation-dependent collapse loads under seismic conditions.

The performance of the DK (Discrete Kirchhoff) and DKM (Discrete Kirchhoff-Mindlin) shell element classes in the upper bound finite-element-based limit analysis and in the sequential finite-element-based limit analysis

The new flat shell element DKMGQ-CR in linear and geometric nonlinear analysis

Study on the Vector Quadrilateral Isoparametric Shell Element with Shear Deformation

Nonlinear Dynamic Analysis of Shells Using Finite Particle Method

Eight-node shell element based on incompatible modes

A quadrilateral flat-shell element for the static and dynamic analysis of composite and sandwich cylindrical, spherical and conical shell panels

Upper bound limit analysis of 3-D structures using finite element method

DKT Flat Shell Elements and Their Implementations in One Step FEM in Sheet Metal Forming

Upper Bound Shakedown Analysis of Plates Utilizing the C ^1 Natural Element Method

Boundary element methods for lower bound limit and shakedown analysis

Upper-bound Limit Analysis Based on the Natural Element Method

Analysis of shell by finite element method of lines (II): Numerical examples

Upper Bound Shakedown Analysis with the Nodal Natural Element Method

A general element for shell analysis based on the scaled boundary finite element method

On triangular virtual elements for Kirchhoff–Love shells

Development and Application of a High-Performance Triangular Shell Element and an Explicit Algorithm in Opensees for Strongly Nonlinear Analysis

Accelerated Koiter method for post-buckling analysis of thin-walled shells under axial compression

A mixed smoothed finite element limit analysis formulation for static and seismic collapse loads

Upper Bound Limit Analysis of Plates Utilizing the C1 Natural Element Method

Direct analysis for plate and shell by three-dimensional element free Galerkin method

An adaptive strategy based on conforming quadtree meshes for kinematic limit analysis