Abstract:Electro-reduction of O2 to generate H2O2 is an attractive alternative to the current anthraquinone process and quietly necessary for the chemical industries and environmental remediation. It is general that sufficient porous structure contributes to expose more catalytic active sites and shorten diffusion paths for the heterogeneous catalysis of O2. In this work, initially, the Fe3O4 nanoparticles embedded graphite felt (Fe3O4@GF) is prepared through a mild hydrothermal following with thermal reduction method. This special combination not only provides iron source for the electro-Fenton reaction, but also supplies rich active sites from the Fe3O4 embedded structure with abundant cracks, which are beneficial to increase the reaction rate. Compared with raw graphite felt (RGF), the fresh Fe3O4@GF exhibits superior pollutant degradation kinetics with more than 400% increase and approximately 37.8% improvement to the removal of total organic carbon. 98% decolorization of rhodamine B (RhB) can be achieved in just 5 minutes, and quickly complete 100% removal of RhB in the next few seconds. As the electro-Fenton reaction progresses, Fe3O4 dissolves in the electrolyte, leaving porous structure on the surface of the GF to form a porous GF (PGF), and the rapid radical reaction activates GF surface. Both the chemical etching of Fe3O4 and the electro-Fenton process can further increase the specific surface area, defects and actives sites of the electrode. As expected, the active PGF exhibits favorable performance of H2O2 production among in pH=1 (320.0±36.5 mg L-1), 3 (301.9±13.2 mg L-1) and 7 (320.4±21.2 mg L-1) electrolyte. The degradation performance of PGF does not significantly decay even after 20 times repeated use, indicating the good structural stability and long-term durability. The superiority of the in-situ Fe source and fast reaction kinetics for electro-Fenton of Fe3O4@GF is confirmed, and this holey-engineered strategy also provides the possibility to achieve swift water purification and open up a new way for developing efficient carbon-based electrodes.

Enhanced electro-generated ferrate using Fe(0)-plated carbon sheet as an anode and its online utilization for removal of cyanide

Effective Removal of Sb(V) from Aqueous Solutions by Electrocoagulation with Composite Scrap Iron-Manganese As an Anode.

Electrochemical Synthesis of Ferrate(VI) by Anodic Oxidation

Simultaneously Providing Iron Source towards Electro-Fenton Process and Enhancing Hydrogen Peroxide Production via a Fe3O4 Nanoparticles Embedded Graphite Felt Electrode.

Treatment of Electroplating Wastewater Containing Nickel by Fenton Oxidation-Ferrite Process

Toward Continuous Electrochemical Synthesis of Ferrate

Efficient Activation of Ferrate(vi) by Colloid Manganese Dioxide: Comprehensive Elucidation of the Surface-Promoted Mechanism.

Ductile Iron: A Low-Cost Optimal Anode Material for Electrochemical Generation of Ferrate (VI)

Electrodeposition of FeOOH nanosheets on carbon felt for enhanced sulfamerazine removal via visible light-assisted electro-Fenton process

Efficient Treatment of an Electroplating Wastewater Containing Heavy Metal Ions, Cyanide, and Organics by H2o2 Oxidation Followed by the Anodic Fenton Process

The Rapid Electrochemical Preparation of Dissolved Ferrate(vi): Effects of Various Operating Parameters

Fe Doped Γ-Mno2 of Anode for Lead Release Inhibition in Zinc Electrowinning

Enhanced Electricity Generation from Electrochemical Oxidation of FeII in an Air–Cathode Fuel Cell Amended with Chelating Anions

Preparation of highly active and durable electrodes for alkaline water electrolysis by anodizing of commercial FeNi and FeNiCo alloys

Direct electrochemical preparation of sodium ferrate

Fabrication of FeCu/CC composite for efficient removal of nitrate for aqueous solution via electrochemical reduction process

Boosting the oxidative capacity of the Fe(0)/O 2 system via an air-breathing cathode

Accelerated Fe2+ Regeneration in an Effective Electro-Fenton Process by Boosting Internal Electron Transfer to a Nitrogen-Conjugated Fe(III) Complex

Deposition of Iron on Graphite Felts by Thermal Decomposition of Fe(Co)(5) for Anodic Modification of Microbial Fuel Cells

Faradaic efficiency and anodic electrochemical behavior of Fe electrocoagulation: The role of co-existing ions and ultrasonic assistance

Activated carbon as effective cathode material in iron-free Electro-Fenton process: Integrated H 2 O 2 electrogeneration, activation, and pollutants adsorption.