Abstract:The success of any carbon capture and storage method largely depends on, among other factors, its safety, reliability, and thorough understanding of the interactions among CO2, underground geological formation, and resident brine. Upon injection into the subsurface rock formation, CO2 interacts with the host geological formation and brine, initiating complex geochemical reactions that are often poorly understood and could potentially affect the overall stability and storage capacity of the geological formation, particularly those in close proximity to an intense heat source. For instance, the impact of intense and prolonged heat due to, say, magmatic intrusion on sandstones' framework, authigenic mineralogies, and CO2-storage potentials is still poorly understood. Consequently, in this study, we have investigated the impact of firing on CO2-rock-brine reactions in the Bandera Gray (BG) sandstone. Prior to the CO2 injection using 60 000 ppm brine at 75 °C and 28.7 MPa for 30 days, two samples of the BG sandstone were fired for 6 h in a muffle furnace at 700 and 1100 °C each. The BG samples were then studied for XRD, SEM, and ICP-OES analyses before and after the CO2 injection, mainly to investigate any changes in mineralogical compositions and fluid chemistry. To determine the impact of the CO2-rock-brine interactions on the authigenic and framework mineralogies of the BG sandstones under low pH (∼3) conditions, powdered samples of the pre- and postfired BG sandstones were treated with nitric acid. The findings of the study indicate that there were no observable reactions involving rock-forming minerals and carbonate cement in the unfired and fired (at 700 °C) sandstones after the CO2 injection. However, pervasive feldspar-dissolution porosity was formed in the postfired BG sandstone (1100 °C) after CO2 injection. This was mainly because albite was partly to pervasively transformed into anorthite during firing at 1100 °C, making the feldspar highly susceptible to dissolution under CO2 conditions. This implies that the conversion of albite into chemically unstable anorthite in natural sandstones that underwent intense and prolonged heating could develop significant amounts of secondary dissolution porosity due to CO2 injection, thereby impacting their storage capacities and overall petrophysical properties. This dissolution was separately corroborated using a nitric acid treatment. The findings of the study will provide a better understanding of the CO2-rock-brine reactions involving sandstones that experienced intense heat due to, for instance, magmatic activity over a long geologic time scale, which has largely transformed the chemistry of their feldspars, particularly plagioclase.

Stability analysis of a granite-based geopolymer sealant for CO 2 geosequestration: In-situ permeability and mechanical behavior while exposed to brine

Sedimentation-affected Engineering Performances and Microstructures of a Hybrid Portland- Sulfate Aluminate Cement Grout Cast in Long Tubes

Water-Extended Low-Density Granite-Based Geopolymer for Low-Temperature Well Cementing Applications: The Impact of Precursor Selection and Particle-Size Distribution

Assessing salt precipitation and weak acid interaction in subsurface CO2 injection: Potential 50% strength decline in near-wellbore reservoir sandstones

Effects of Sulfate and Magnesium on Cement Degradation under Geologic CO2 Sequestration Conditions

Degradation of chemical and mechanical properties of cements with different formulations in CO2-containing HTHP downhole environment

An Investigation into CO2–Brine–Cement–Reservoir Rock Interactions for Wellbore Integrity in CO2 Geological Storage

Alteration of Fractured Foamed Cement Exposed to CO2-Saturated Water: Implications for Well Integrity

CO2-Rock-Brine Interactions in Feldspar-Rich Sandstones That Underwent Intense Heating

Greenhouse Gas Control Technologies , GHGT-13 , 14-18 November 2016 , Lausanne , Switzerland Closing of micro-cavities in well cement upon exposure to CO 2 brine

A Novel Coal Gasification Coarse Slag-Based Geopolymer: Influences of Physico-Chemical Coupling Activation on Its Properties, Microstructure, and Hazardous Material Immobilization

Physicochemical and Mechanical Behavior of the One-Part Geopolymer Paste Exposed to Hydrochloric and Sulfuric Acids

Experimental evaluation of cement integrity on exposure to supercritical CO2 using NMR: Application to geostorage

Physico-chemical properties and durability of a fly-ash-based geopolymer

Research on composite municipal solid waste incineration bottom ash and granulated blast furnace slag based geopolymers with sodium alginate for sealing coal seam gas drainage boreholes

Protective Geopolymer Coatings Containing Multi-Componential Precursors: Preparation and Basic Properties Characterization

Desalination RO reject brine as a novel-based porous geopolymer for phosphorus removal from contaminated media

New challenges in experimental unsaturated soil mechanics. Experimental upscaling of an engineered gas-permeable seal

Study on the Chloride–Sulfate Resistance of a Metakaolin-Based Geopolymer Mortar

Strengthening mechanism of polyvinyl alcohol fibers on mechanical properties of geopolymer concrete subjected to a wet-hot-salt environment

Coarse-Grained Monte Carlo Simulations with Octree Cells for Geopolymer Nucleation at Different pH Values