Abstract:In this study, the synthesis of multi-walled carbon nanotubes (MWCNTs) was carried out by chemical vapor deposition (CVD) using propane as the carbon source and Si as the catalyst support. The effect of CVD process variables such as temperature, choice of catalyst, etc on the growth behavior of nanotubes has been examined to understand the catalytic growth of CNTs. The transition metal catalysts, Fe and Ni, were used in both elemental metal form and in a metal complex form. In the case of elemental metal catalysts, the respective metals were deposited over the Si substrate using thermal evaporation following which nanotubes were synthesized by means of CVD. Subsequent studies of the synthesized carbon nanostructures employing elemental metal catalysts revealed a significant influence of the temperature and the catalyst material on the structure of CNTs. The CNTs synthesized using Ni catalyst were bamboo-like whereas the CNTs developed employing Fe catalyst were straight tubes with partial metal filling. Consequently, growth models for the different growth mechanisms have been proposed. Certain limitations of the above process have been overcome by employing spin-coating of a metal complex catalyst material on the Si substrate. The CVD synthesis of nanotubes using metal complex catalysts always resulted in partially catalyst filled CNTs. More importantly, the metal complex catalyst could be easily patterned on the Si substrate using spin-coating and photolithography, which resulted in site selective growth of partially catalyst filled MWCNTs. Since the entire process of site selective growth is suitable for conventional device fabrication, this method is a promising and practical pathway for large-scale fabrication of several magnetic material filled CNT-based devices.

Exfoliated Molybdenum Disulfide as a Platform for Carbon Nanotube Growth-Properties and Characterization

Growing and Etching MoS₂ on Carbon Nanotube Film for Enhanced Electrochemical Performance.

Molybdenum Disulfide Sheathed Carbon Nanotubes

Growth and Characterization of Bamboo-Like Multiwalled Carbon Nanotubes over Cu/Al2o3 Catalyst

Molybdenum anchoring effect in Fe–Mo/MgO catalyst for multiwalled carbon nanotube synthesis

Thin-Film Metal Catalyst For The Production Of Multi-Wall And Single-Wall Carbon Nanotubes

Synthesis and Characterization of Molybdenum Carbide Catalysts on Different Carbon Supports

Growth and Characterization of Multi-Walled Carbon Nanotubes using Chemical Vapor Deposition

MoS2 nanolayers grown on carbon nanotubes: an advanced reinforcement for epoxy composites

(Digital Presentation) Modification of Physicochemical Properties of Carbon Nanotubes By Chemical Functionalization

Carbon nanotube hybrids with MoS 2 and WS 2 synthesized with control of crystal structure and morphology

Synthesis, characterization, and application of carbon cubes

Innovative Variation in the Morphological Characteristics of Carbon Nanowalls Grown on a Molybdenum Disulfide Interlayer

Carbon Nanotubes Coated with Tubular MoS2 Layers Prepared by Hydrothermal Reaction

Carbon Nanotube Synthesis and Parametric Study Using CaCO3 Nanocrystals As Catalyst Support by CVD

In situ synthesis, morphology, and fundamental properties of polymer/MoS 2 nanocomposites

In Situ Synthesis of Carbon Nanotube Hybrids with Alternate MoC and MoS2 to Enhance the Electrochemical Activities of MoS2

Growth of Carbon NanoStructures in Ceramic Materials

Nano-bridge effects of carbon nanotubes on the properties reinforcement of two-dimensional molybdenum disulfide/polymer composites

Synthesis and Characterization of 2D Molybdenum Carbide (MXene)