[Intravenous globulin preparations for infectious diseases complicated with various hematologic diseases].

H. Maeda,K. Fukuda,H. Hasegawa,T. Iwanaga,K. Irikai

1983-07-01

Abstract:

What problem does this paper attempt to address?

Identification by HSQC and quantification by qHNMR innovate pharmaceutical amino acid analysis

Daniela Rebollar-Ramos,Shao-Nong Chen,David C Lankin,G Joseph Ray,Robert A Kleps,Samuli-Petrus Korhonen,Juuso Lehtivarjo,Matthias Niemitz,Guido F Pauli

DOI: https://doi.org/10.1016/j.jpba.2024.116390

2024-12-15

Abstract:This study introduces a new NMR-based methodology for identification (ID) and quantification (purity, strength) assays of widely used amino acids. A detailed analysis of four amino acids and their available salts was performed with both a high-field (600 MHz) and a benchtop (60 MHz) NMR instrument. To assess sensitivity constraints, samples for 1H NMR analysis were initially prepared using only 10 mg of analyte and 1 mg of maleic acid (MA) as an internal calibrant (IC) and secondary chemical shift reference. The characteristic dispersion of the peak patterns indicating the presence or absence of a counterion (mostly chloride) was conserved at both high and low-field strength instruments, showing that the underlying NMR spectroscopic parameters, i.e., chemical shifts and coupling constants, are independent of the magnetic field strength. However, as the verbal descriptions of 1H NMR spectra are challenging in the context of reference materials and pharmaceutical monographs, an alternative method for the identification (ID) of amino acids is proposed that uses 13C NMR patterns from multiplicity-edited HSQC (ed-HSQC), which are both compound-specific and straightforward to document. For ed-HSQC measurements, the sample amount was increased to 30 mg of the analyte and several acquisition parameters were tested, including t1 increments used in the pulse program, number of scans, and repetition time. Excellent congruence with deviations <0.1 ppm was achieved for the 13C chemical shifts from 1D 13C NMR spectra (150 MHz) vs. those extracted from ed-HSQC (15 MHz traces). Finally, all samples of amino acid candidate reference materials were quantified by 1H qNMR (abs-qHNMR) at both 600 and 60 MHz. At high field, both IC and relative quantitations were performed, however, with the low-field instrument, only the IC method was used. The results showed that the analyzed reference material candidates were generally highly pure compounds. To achieve adequately low levels of uncertainty for such high-purity materials, the sample amounts were increased to 100 mg of analytes and 10 mg of the IC and replicates were analyzed for selected amino acids.
[Quantitative NMR Spectroscopy and Its Application in Quality Control of Chinese Medicinal Injection].

Jian-Yang Pan,Fang Zhao,Wen-Zhu Li,Hai-Bin Qu

DOI: https://doi.org/10.19540/j.cnki.cjcmm.20210906.302

2022-01-01

Abstract:Chinese medicinal injection, made of active components extracted from Chinese medicine or Chinese medicinal compound, is a novel dosage form of Chinese patent medicine in China and is pivotal in the traditional Chinese medicine(TCM) industry. The quality control standard of Chinese medicinal injection determines its safety and efficacy. The quantitative nuclear magnetic resonance(qNMR) spectroscopy is a non-targeted, non-invasive, and non-destructive technique with high reproducibility, short measurement time, convenient sample preparation, a broad range of linearity, and no requirement on the reference substance of tested components, which is advantageous as compared with traditional chromatographic methods, and it can provide information about the molecular composition of the tested samples. Therefore, in light of multiple challenges in the quality control of Chinese medicinal injection, such as complex composition, difficulties in quantitative analysis, and the shortage of reference substances, the application of qNMR spectroscopy combined with chemometrics techniques was proposed for the quality evaluation of Chinese medicine reference substances, Chinese medicinal injection, and intermediates in the production process, as well as for the stability analysis of Chinese medicinal injection. This study is expected to provide references for the application of qNMR spectroscopy in the quality control of Chinese medicinal injection.
Quality Evaluation of Ginsenoside Reference Substances Based on Qnmr Spectroscopy

Jian-Yang Pan,Fang Zhao,Wen-Zhu Li,Hai-Bin Qu

DOI: https://doi.org/10.19540/j.cnki.cjcmm.20211108.304

2022-01-01

Abstract:The present study established a quality evaluation method for ginsenoside reference substances based on quantitative nuclear magnetic resonance(qNMR) spectroscopy. ~1H-NMR spectra were collected on Bruker Avance Ⅲ 500 MHz NMR spectrometer equipped with a 5 mm BBO probe. The acquire parameters were set up as follows: pulse sequence of 30°, D_1=20 s, probe temperature= 303 K, and the scan number = 32. Dimethyl terephthalate, a high-quality ~1H-qNMR standard, was used as the internal standard and measured by the absolute quantitative method. Methyl peaks of comparatively good sensitivity were selected for quantification, and linear fitting deconvolution was adopted to improve the accuracy of integration results. The qNMR spectroscopy-based method was established and validated, which was then used for the quality evaluation of ginsenoside Rg_1, ginsenoside Re, ginsenoside Rb_1, ginsenoside Rd, and notoginsenoside R_1. The results suggested that the content of these ginsenoside reference standards obtained from the qNMR spectroscopy-based method was lower than that detected by the normalization method in HPLC provided by the manufacturers. In conclusion, the qNMR spectroscopy-based method can ensure the quality of ginsenoside reference substances and provide powerful support for the accurate quality evaluation of Chinese medicine and its preparations. The qNMR spectroscopy-based method is simple, rapid, and accurate, which can be developed for the quantitative assay of Chinese medicine standard references.
A Novel Critical Control Point and Chemical Marker Identification Method for the Multi-Step Process Control of Herbal Medicines Via NMR Spectroscopy and Chemometrics.

Fang Zhao,Wenzhu Li,Jianyang Pan,Zeqi Chen,Haibin Qu

DOI: https://doi.org/10.1039/d0ra03172k

IF: 4.036

2020-01-01

RSC Advances

Abstract:Herbal medicines have played a vital role in maintaining the health of the world population in the past thousands of years, and have proved to be an effective therapy. It is important to improve our understanding of the effects of the multi-step processing in herbal medicines on the chemical changes to ensure product quality. A proton nuclear paramagnetic resonance (1H NMR)-based evaluation strategy was developed for an efficient process variation exploration and diversified metabolite identification. In this study, 48 process intermediates from 6 commercial batches of the multi-step manufacturing chain of Danshen processing were obtained. Hierarchical classification analysis (HCA) tree based on 1H NMR spectra clustered the samples according to the processing steps, which indicates that 1H NMR has the potential capability for critical control point identification based on its adequate information of the organic compounds. Then, principal component analysis (PCA) and orthogonal partial least squares-discriminant analysis (OPLS-DA) were applied to distinguish the major metabolite differences between the intermediates before and after the critical control point. In this case, the alkali-isolation and acid-dissolution method was recognized as the most critical process in the multi-step chain of Danshen extract manufacturing. Potential metabolites with the larger amplitude of variation and contributing the most to the discrimination were found to be potential quality markers by S-plot, including several previously undetected amino acids. The results in this study are consistent with previous research studies and reference experiments conducted with other analytical tools. Taken together, they prove that 1H NMR with chemometrics is a very effective process quality control tool to provide comprehensive information on the chemical changes during the processing of herbal medicines, and help with the identification of critical control points and potential critical quality markers.
Nuclear Magnetic Resonance Spectroscopy for Quantitative Analysis: A Review for Its Application in the Chemical, Pharmaceutical and Medicinal Domains

Adila Khalil,Mohammad Kashif

DOI: https://doi.org/10.1080/10408347.2021.2000359

2021-11-10

Critical Reviews in Analytical Chemistry

Abstract:Nuclear magnetic resonance (NMR) is a rapid and accurate analytical tool for qualification and quantification. The capacity of NMR of being quantitative can also justify the calibration of other analytical methods. In pharmaceutical domain, quantitative NMR (qNMR) can be applied in the identification and quantification of drug simultaneously. The early drug development stage requires a minimum sample for analysis. Thus, priority should be given to utilize this technique to attain results with least investment, rapid analysis time and minimum sample consumption. This technique is a significant phenomenon to identify impurities, drug substance, residual solvents of in-process control (IPC) samples and characterizing the formulations. From an analyst's perspective, qNMR proved to be a routine practice in pharmaceutical industry to qualify any drug product. The absolute and relative methods offer great help in quantifying the component of interest in the process control samples and finished products. This review highlights the evolution of NMR application in the pharmaceutical industry, where determining the purity of drug substance, drug product and establishing the identity of impurities and its level are the challenging aspects. NMR in medicinal field emerging as a numero uno for Covid-19 severity detection and its dire consequences, accelerated vaccine development and the mapping of SAR-COV-2 RNA and proteins via chemical shift assignments.

chemistry, analytical
Application of quantitative NMR for purity determination of standard ACE inhibitors

Shi Shen,Xing Yang,Yaqin Shi

DOI: https://doi.org/10.1016/j.jpba.2015.05.021

2015-10-10

Abstract:This study investigated the accuracy of the quantitative NMR method for purity determination of ACE inhibitors reference standards and the discovery of two pairs of new diastereoisomers. Six types of ACE inhibitors, imidapril hydrochloride, benazepril hydrochloride, lisinopril, enalapril maleate, quinapril hydrochloride, and captopril were quantificated and validated for the qNMR method by discussing factors that affect parameters of the qNMR experiment, internal standards, integration, pH-effect, and uncertainty. The results were compared with data obtained by the mass balance method. The study found that maleic acid influenced the quantification of captopril in deuteroxide because of a chemical reaction. The mixtures of the reaction products were isolated by HPLC and structurally elucidated by NMR as two pairs of new diastereoisomers, 1-[(2S,4R)-thio-2-methylpropionyl-5-d-ethanedicarboxylicacid]-L-proline and 1-[(2S,4S)-thio-2-methylpropionyl-5-d-ethanedicarboxylicacid]-L-proline. The results showed that the accuracy and precision of quantitative (1)H NMR spectroscopy satisfied the requirements for quantitative analysis of chemical reference standards and provided a simple, rapid, and reliable method for purity determination of ACE inhibitors systematically.
Assessment of the Purity of IMM-H014 and Its Related Substances for the Treatment of Metabolic-Associated Fatty Liver Disease Using Quantitative Nuclear Magnetic Resonance Spectroscopy

Hanyilan Zhang,Haowen Zhu,Song Wu,Haoyang Tang,Wenxuan Zhang,Xiaoliang Gong,Tiesong Wang,Yinghong Wang,Qingyun Yang

DOI: https://doi.org/10.3390/ijms242417508

2023-12-15

Abstract:An accurate, rapid, and selective quantitative nuclear magnetic resonance method was developed and validated to assess the purity of IMM-H014, a novel drug for the treatment of metabolic-associated fatty liver disease (MAFLD), and four related substances (impurities I, II, III, and IV). In this study, we obtained spectra of IMM--H014 and related substances in deuterated chloroform using dimethyl terephthalate (DMT) as the internal standard reference. Quantification was performed using the 1H resonance signals at δ 8.13 ppm for DMT and δ 6.5-7.5 ppm for IMM-H014 and its related substances. Several key experimental parameters were investigated and optimized, such as pulse angle and relaxation delay. Methodology validation was conducted based on the International Council for Harmonization guidelines and verified with satisfactory specificity, precision, linearity, accuracy, robustness, and stability. In addition, the calibration results of the samples were consistent with those obtained from the mass balance method. Thus, this research provides a reliable and practical protocol for purity analysis of IMM-H014 and its critical impurities and contributes to subsequent clinical quality control research.
Two Ways to Achieve the Same Goal—Two Validated Quantitative NMR Strategies for a Low-Abundance Natural Product in Standardized Extracts: The Case of Hepatodamianol in Turnera diffusa

Aída Parra-Naranjo,Cecilia Delgado-Montemayor,Ricardo Salazar-Aranda,Rocío Castro-Ríos,Noemí Waksman-Minsky,Alma L. Saucedo

DOI: https://doi.org/10.3390/molecules27196593

IF: 4.6

2022-10-06

Molecules

Abstract:The quantification of low-abundance secondary metabolites in plant extracts is an analytical problem that can be addressed by different analytical platforms, the most common being those based on chromatographic methods coupled to a high-sensitivity detection system. However, in recent years nuclear magnetic resonance (NMR) has become an analytical tool of primary choice for this type of problem because of its reliability, inherent simplicity in sample preparation, reduced analysis time, and low solvent consumption. The versatility of strategies based on quantitative NMR (qNMR), such as internal and external standards and electronic references, among others, and the need to develop validated analytical methods make it essential to compare procedures that must rigorously satisfy the analytical well-established acceptance criteria for method validation. In this work, two qNMR methods were developed for the quantification of hepatodamianol, a bioactive component of T. diffusa. The first method was based on a conventional external standard calibration, and the second one was based on the pulse length-based concentration determination (PULCON) method using the ERETIC2 module as a quantitation tool available in TopSpin software. The results show that both procedures allow the content of the analyte of interest in a complex matrix to be determined in a satisfactory way, under strict analytical criteria. In addition, ERETIC2 offers additional advantages such as a reduction in experimental time, reagent consumption, and waste generated.

chemistry, multidisciplinary,biochemistry & molecular biology
Quantitative nmr spectroscopy for quality control of drugs and pharmaceuticals

V. V. Podgorskii,A. S. Mikhalev,G. A. Kalabin

DOI: https://doi.org/10.1007/s11094-011-0591-1

2011-06-01

Pharmaceutical Chemistry Journal

Abstract:Results of a comparative analysis of the use of quantitative NMR spectroscopy for the quality control of pharmaceuticals and drugs are presented. Diquertin, the active principle of which is the common flavonoid dihydroquercetin (taxifolin, 3,3′,4′,5,7-pentahydroxyflavanone), was used as an example. Quantitative 1H NMR spectroscopy can be recommended on the basis of this comparative analysis for use when it is necessary to identify all possible impurities or to confirm the absence of toxic contaminants and also for rapid analysis of samples.

pharmacology & pharmacy,chemistry, medicinal
A new antibacterial compound from Luo Han Kuo fruit extract (Siraitia grosvenori)

Yan Zheng,Zhongliang Liu,J. Ebersole,C. Huang

DOI: https://doi.org/10.1080/10286020903048983

2009-07-27

Journal of Asian Natural Products Research

Abstract:Luo Han Kuo fruit (Siraitia grosvenori Swingle) has been used in China for centuries as a sweetening agent, and also used to treat sore throat and cough. In our recent study, a new bioactive compound, (2R,3S,4S)-2,3-trans-3,4-cis-5,3′-bimethoxy-7-(trans-2-propenal)-3,4-flavandiol (1), named siraitiflavandiol was obtained. The structure has been determined on the basis of spectroscopic studies including 1D and 2D NMR (1H, 13C NMR, 1H–1H COSY, HSQC, HMBC, and NOESY), CD, EI-MS, and HR-EI-MS spectra. The new compound was evaluated in vitro for its inhibitory ability against the growth of oral bacterial species Streptococcus mutans, Porphyromonas gingivalis, and yeast Candida albicans. The minimum inhibitory concentrations were 6, 24, and 6 μg/ml, respectively.
Rapid Quantitation of Non-chromophoric Vigabatrin and Gabapentin by a Validated qNMR Method in Bulk Drug and Marketed Formulations

Pooja Bedage,Archana Sahu,Inder Pal Singh

DOI: https://doi.org/10.2174/0115734129283110240131044647

2024-02-20

Current Pharmaceutical Analysis

Abstract:Background:: Vigabatrin and gabapentin, commonly used antiepileptic drugs in clinics, lack a UV active chromophore and, therefore, require cumbersome derivatization methods for analysis by HPLC using fluorescence detection. This study demonstrated the use of NMR for their quantitative determination in pure form and their pharmaceutical formulations. Objective:: To develop a validated qNMR method for non-chromophoric drugs Vigabatrin and Gabapentin. Methods:: The signal of methine proton of vigabatrin at 3.67 ppm relative to the signal of maleic acid at 6.17 ppm and the methylene signal of gabapentin at 2.88 ppm relative to the signal of caffeine at 7.75 ppm was used for qNMR. The developed method was validated with respect to linearity, limits of detection and quantitation, accuracy, precision, specificity and solution state stability. Results:: Linearity range and r2 were found to be from 2.66 to 42.11 mg/mL and 0.9999. The limit of detection and quantification were 0.0129 mg/mL and 0.0391 mg/mL, respectively, for vigabatrin. This method was found to be linear (0.9998) and specific within the gabapentin concentration range from 1.07 to 34.24 mg/mL of D2O. The limits of detection and quantification were 0.0248 mg/mL and 0.0751 mg/mL, respectively. Conclusion:: Both methods were highly precise, with a calculated RSD of 0.60 % and 0.76 %, respectively. The robustness of the methods was revealed by changing pre and post-processing NMR parameters. The developed methods provide a simple and straight approach for the absolute determination of gabapentin and vigabatrin in bulk drugs and their marketed formulations without any pre-procedures.

pharmacology & pharmacy
Proton nuclear magnetic resonance spectroscopy (NMR) methods for determining the purity of reference drug standards and illicit forensic drug seizures

Patrick A Hays

Abstract:A rapid, sensitive, accurate, precise, reproducible, and versatile method for determining the purity of reference drug standards and the routine analysis of illicit drugs and adulterants using proton (1H) Nuclear Magnetic Resonance (NMR) Spectroscopy is presented. The methodology uses a weighed sample dissolved in a deuterated solvent or solvent mixture containing a high purity internal standard. The NMR experiment employs 8 scans using a 45 second delay and 90 degrees pulse. In the determination of purity of reference standards, the number of quantitative determinations available is equal to the number of peak groups that are baseline resolved. The relative standard deviation (RSD) of these signals is usually < 1% for pure standards, and the results agree well with other purity determining methods. This method can also aid in the determination of correct molecular weight for standards containing an unknown number of waters of hydration or an unknown number of acids per drug in salts. Because the molar response for the hydrogen nucleus is 1 for all compounds, and since no separation media are used, only one linearity study is required to test a probe. In the presented study, the linearity of the NMR probe was determined using methamphetamine HCl dissolved in deuterium oxide (D2O) with maleic acid as the internal standard (5 mg) for a range of concentrations from 0.033 to 69.18 mg/ml with a resulting correlation coefficient of >0.9999 for all 6 methamphetamine peak groups. The spectra of complex illicit heroin, methamphetamine, MDMA, and cocaine samples are presented, as well as an extensive list of compounds, their solubilities and the solvent(s) and internal standard used.
Quantitative Profiling of Comprehensive Composition in Compound Herbal Injections: an NMR Approach Applied on Shenmai Injection

Wenzhu Li,Fang Zhao,Xinyuan Xie,Jiayu Yang,Jianyang Pan,Haibin Qu

DOI: https://doi.org/10.1002/pca.3158

2022-01-01

Phytochemical Analysis

Abstract:INTRODUCTION:Compound herbal injections (CHIs) can be regarded as a significant innovation in the modernisation of herbal medicine. Therefore, improving the quality control level of CHIs has always been an active research topic in traditional herbal medicine.OBJECTIVES:In this study, Shenmai injection was used as a representative sample for investigating the ability of proton nuclear magnetic resonance (1 H NMR) in the quality evaluation of CHIs.METHODS:A quantitative 1 H NMR method was developed to simultaneously determine the contents of total ginsenosides, polysorbate 80, and 20 primary metabolites in Shenmai injection. Multivariate statistical analysis was combined to compare differences between samples from different manufacturers.RESULTS:It was found that the combined measurement uncertainty of each component is less than 1.61%, which demonstrates the reliability of the method. Furthermore, the components determined by this method account for up to 92.64% of the total solids, which is an unprecedented success in the analysis of Shenmai injection. In the end, the method was applied to the quality comparison of Shenmai injection from six manufacturers. The results showed that the differences among the samples from the six manufacturers were reflected in multiple types of components.CONCLUSION:This study fully demonstrates the superiority of the quantitative 1 H NMR method in comprehensive composition profiling of CHIs, which is conducive to improving the quality control level of Shenmai injection. Further, the present study can be used as a reference study for the research on the quality and safety of CHIs.
Purity determination of pyributicarb by internal standard correction–high-performance liquid chromatography–quantitative nuclear magnetic resonance

Xiaonan Sun,Wei Zhang,Ting Huang,Yajuan He,Hongmei Li,Ping Su,Yi Yang

DOI: https://doi.org/10.1007/s00216-020-02832-0

2020-08-04

Analytical and Bioanalytical Chemistry

Abstract:An internal standard correction–high-performance liquid chromatography–quantitative nuclear magnetic resonance (ISC–HPLC–qNMR) procedure was established as a reliable quantitative method for complex organic compounds with low purity in order to solve the risk of qNMR inaccuracy because of insufficient resolution of impurity peaks from the selected quantitative peak. This method collects a small quantity of target analyte from low-purity organics by LC. After drying and re-dissolving in deuterated solvent containing internal standard, the solution was analyzed by 1H NMR and HPLC. Another solution prepared by accurately weighing unpurified low-purity substance and internal standard was analyzed by HPLC. Based on the theoretical derivation derived from the Beer-Lambert law, using the ratio of the HPLC peak areas of two solutions as correction, the purity was then calculated without the same reference as target analyte. Compared to previous methods with similar selectivity and accuracy, it has advantages such as a less purified sample is required, time for lyophilization is reduced by half, and sample preparation is more controllable. The proposed method was verified by analysis of a suite of six commercially available, high-purity compounds, and the difference of results between it and direct qNMR was within 0.1%. The result of pyributicarb using ISC-HPLC-qNMR was 97.6% (U = 0.5%; k = 2), and the reference value was 97.61% (U = 0.22%; k = 2). The results demonstrate that the proposed method provides a new way for reference material producers to calibrate lower-purity organics and has the potential advantage of accurate quantification of lower-purity organics.

chemistry, analytical,biochemical research methods
Molecular exchange dynamics in partially filled microscale and nanoscale pores of silica glasses studied by field-cycling nuclear magnetic resonance relaxometry.

C. Mattea,R. Kimmich,I. Ardelean,S. Wonorahardjo,G. Farrher

DOI: https://doi.org/10.1063/1.1808423

2004-11-15

Abstract:Nuclear magnetic spin-lattice relaxation experiments have been performed in partially filled porous glasses with wetting and nonwetting fluids. The frequency dependence of the spin-lattice relaxation rate in Vycor (4 nm pores) and VitraPOR #5 (1 microm pores) silica glasses was studied as a function of the filling degree with the aid of field-cycling NMR relaxometry. The species of primary interest were water ("polar") and cyclohexane ("nonpolar"). Spin-lattice relaxation was examined in the frequency range from 1 kHz to 400 MHz with the aid of a field-cycling NMR relaxometer and an ordinary 400 MHz NMR spectrometer. Three different mobility states of the fluid molecules are distinguished: The adsorbed state at the pore walls, the bulklike liquid phase, and the vapor phase. The adsorbate spin-lattice relaxation rate is dominated by the "reorientation mediated by translational displacements" (RMTD) mechanism taking place at the adsorbate/matrix interface at frequencies low enough to neglect rotational diffusion of the molecules. The experimental data are analyzed in terms of molecular exchange between the different mobility states. Judged from the dependence of the spin-lattice relaxation rates on the filling degree, limits for slow and fast exchange (relative to the RMTD time scale) can be distinguished and identified. It is concluded that water always shows the features of slow exchange irrespective of the investigated pore sizes and filling degrees. This is in contrast to cyclohexane which is subject to slow exchange in micrometer pores, whereas fast exchange occurs in nanoscopic pores. The latter case implies that the vapor phase contributes to molecular dynamics in this case at low filling degrees while it is negligible otherwise.
A Quantitative ¹H Nuclear Magnetic Resonance (qhnmr) Method for Assessing the Purity of Iridoids and Secoiridoids.

Zeyun Li,Edward Welbeck,Li Yang,Chunyong He,Haijun Hu,Ming Song,Kaishun Bi,Zhengtao Wang

DOI: https://doi.org/10.1016/j.fitote.2014.12.001

IF: 3.204

2014-01-01

Fitoterapia

Abstract:This paper utilized a quantitative (1)H nuclear magnetic resonance (qHNMR) method for assessing the purity of iridoids and secoiridoids. The method was fully validated, including specificity, linearity, accuracy, precision, reproducibility, and robustness. For optimization of experimental conditions, several experimental parameters were investigated, including relaxation delay (D1), scan numbers (NS) and power length (PL1). The quantification was based on the area ratios of H-3 from analytes relative to aromatic protons from 1,4-dinitrobenzene (internal standard) with methanol-d4 as solvent. Five iridoids and secoiridoids (sweroside, swertiamarin, gentiopicroside, geniposide, genipin) were analyzed. Furthermore, the results were validated by the high performance liquid chromatography coupled with ultraviolet detection (HPLC-UV) method. It can be concluded that the qHNMR method was simple, rapid, and accurate, providing a reliable and superior method for assessing the purity of iridoids and secoiridoids.
Process Monitoring and Characterization for Extraction of Herbal Medicines Based on Proton (1H) Nuclear Magnetic Resonance Spectroscopy and Multivariate Batch Modeling: a Case Study

Li Wenzhu,Zhao Fang,Pan Jianyang,Qu Haibin

DOI: https://doi.org/10.1007/s12247-022-09629-x

2022-01-01

Journal of Pharmaceutical Innovation

Abstract:The control of batch-to-batch quality variations remains a challenging task for herbal medicine (HM) pharmaceutics. In this study, a novel methodology consisting of Multivariate Statistical Process Control (MSPC) charts and 1H nuclear magnetic resonance (NMR) is developed for the process study of HM reflux extraction. To well characterize the process and build an accurate model, the preprocessing methods of NMR batch data are first screened exhaustively. Statistical control charts, including partial least squares factor score, distance to the model X (DModX), and Hotelling T2, are then jointly employed as batch trajectory monitoring tools for fault monitoring. Finally, the reflux extraction process is characterized on comprehensive metabolite level through the characteristic information in the 1H NMR spectra. The dissolution, degradation, and transformation of primary and secondary metabolites in extract are traced based on the variation of metabolites’ concentration throughout the extraction process. Thirty-five metabolites are identified in the NMR spectra, and six of them are selected as chemical markers to demonstrate the impacts of abnormal operating conditions on the metabolite variation. The current study demonstrates that the combination of multivariate batch modeling and 1H NMR technology realizes not only the process monitoring and fault detection based on MSPC theory but also the process characterization based on the rich qualitative and quantitative information in NMR data. Strategies demonstrated in this study are highly appealing to the research of manufacture process for HM preparations because of the improved process understanding and increased process control.
Process Characterization for Ethanol Precipitation of Salviae Miltiorrhizae Radix Et Rhizoma (danshen) Using 1H NMR Spectroscopy and Chemometrics

Fang Zhao,Wenzhu Li,Jianyang Pan,Hai-bin Qu

DOI: https://doi.org/10.21203/rs.3.rs-57475/v1

IF: 4.885

2020-01-01

Process Biochemistry

Abstract:Background Quality control of the herbal medicines (HMs) still hits technical bottlenecks due to their complicated multi-step pharmaceutical processes. Nuclear magnetic resonance (NMR) spectroscopy could serve as a powerful technique able to obtain comprehensive information of chemical compounds in the manufacturing process of HMs by a single analytical test. In this study, ethanol precipitation of Salvia miltiorrhiza Radix et Rhizoma (Danshen in China), a critical purification process of a particularly commonly used herbal medicinal material, was employed as the research subject. Methods Processed with different variables, including ethanol-material ratio, apparent ethanol concentration and moisture concentration of the raw material, 40 lab-scale experiments of ethanol precipitation were orchestrated by a full factor design with additional central composite circumscribed experiments. After 1H NMR tests, chemometrics methods, including orthogonal partial least squares-discriminant analysis (OPLS-DA), principle component analysis (PCA) and multiple linear regression (MLR), were applied to analyze the spectra of samples. Results 16 metabolites were recognized as the most critical potential chemical markers in the process of Danshen ethanol precipitation by 1H NMR spectra and OPLS-DA, including γ-aminobutyrate, pyroglutamate, succinate, acetate, malonate, fructose, sucrose, raffinose, stachyose, mannotriose, danshensu, lithospermic acid, protocatechuic aldehyde, rosmarinic acid, salvianolic acid A and B. PCA reasonably distinguished all the process intermediates as a function of different process variables adopted during the ethanol precipitation. MLR made the statistical interpretation by quadratic equations to characterize how do significant variables affect the chemical markers. Conclusions Our study indicates that NMR can track detailed potential chemical markers of ethanol precipitation process, which could promote the further understanding of ethanol precipitation process and open up possibilities to develop a more effective process quality control and consistency evaluation methodology of an HM, through providing a more in-depth and improved theoretical process understanding and characterization.
A Feasibility Study on the Non-Invasive Analysis of Bottled Compound E Jiao Oral Liquid Using Near Infrared Spectroscopy

Wenlong Li,Haifan Han,Lu Zhang,Yan Zhang,Haibin Qu

DOI: https://doi.org/10.1016/j.snb.2015.01.073

2015-01-01

Abstract:The aim of this study was to explore the feasibility of near infrared (NIR) spectroscopy for the quantitative analysis of Compound E Jiao oral liquid, a popular oral TCM preparation, through intact glass vials. Transmission spectra were acquired with a sample holder tailored to the instrument's sample compartment. Total flavonoids, total saponins and soluble solid contents were considered as quality indicators of this oral preparation and calibration models were built using partial least-squares regression (PLSR) algorithm. The sample set was comprised of production samples as well as laboratory samples prepared by a concentrating-diluting method so as to extend the concentration range beyond the production variation. The developed models gave root mean square error of prediction (RMSEP) of 0.084 mg mL(-1) for total flavonoids, 0.014 mg mL(-1) for total saponins and 0.21% for soluble solid contents. To better evaluate the prediction performance, an independent set of ten production samples was introduced for the external validation. The models are compared with those built with the transflectance spectra collected in the destructive way. The results of paired t-test and F-test at a significance level of 0.05 revealed that the two sets of models exhibited comparable model performance. The overall results demonstrate that the proposed non-destructive method can be used as an advantageous alternative in the quality inspection of Compound E Jiao oral liquid production. (C) 2015 Elsevier B.V. All rights reserved.
生薬等の標準物質におけるqNMRの活用

Azusa Suzuki

DOI: https://doi.org/10.1248/yakushi.23-00151-5

2024-04-01

YAKUGAKU ZASSHI

Abstract:Crude drugs and Kampo formulations derived from natural materials such as plants, animals, and minerals are multicomponent medicines that contain numerous chemical constituents. Quantitative determination of characteristic constituents for quality control is crucial for the standardization and quality assurance of natural medicines. Quantitative assays to determine marker compound contents are commonly performed using HPLC systems. In order to achieve accurate quantitative determination, it is essential to use standard materials with well-defined purities corresponding to the target analytes. Many marker compounds used as standard materials must be purified and isolated from natural products while ensuring sufficient purity. However, the composition of impurities in the standard material differs among different batches due to differences in the raw materials and their extraction, separation, and purification processes. Therefore, controlling the purity of standard materials derived from natural products is more complex than that of synthetic substances. Quantitative NMR (qNMR), which has become widely used as an absolute quantitative method for low-molecule organic compounds, makes it possible to solve these issues. qNMR has been introduced into the crude drug section of the Japanese Pharmacopoeia (JP) for evaluating the purity of standard materials used for the assay. This review outlines an example of quantitative determination using relative molar sensitivity (RMS) based on qNMR adopted in the JP and introduces the latest efforts toward the application of qNMR to standard materials used for crude drugs in this context.

pharmacology & pharmacy

[Intravenous globulin preparations for infectious diseases complicated with various hematologic diseases].

Identification by HSQC and quantification by qHNMR innovate pharmaceutical amino acid analysis

[Quantitative NMR Spectroscopy and Its Application in Quality Control of Chinese Medicinal Injection].

Quality Evaluation of Ginsenoside Reference Substances Based on Qnmr Spectroscopy

A Novel Critical Control Point and Chemical Marker Identification Method for the Multi-Step Process Control of Herbal Medicines Via NMR Spectroscopy and Chemometrics.

Nuclear Magnetic Resonance Spectroscopy for Quantitative Analysis: A Review for Its Application in the Chemical, Pharmaceutical and Medicinal Domains

Application of quantitative NMR for purity determination of standard ACE inhibitors

Assessment of the Purity of IMM-H014 and Its Related Substances for the Treatment of Metabolic-Associated Fatty Liver Disease Using Quantitative Nuclear Magnetic Resonance Spectroscopy

Two Ways to Achieve the Same Goal—Two Validated Quantitative NMR Strategies for a Low-Abundance Natural Product in Standardized Extracts: The Case of Hepatodamianol in Turnera diffusa

Quantitative nmr spectroscopy for quality control of drugs and pharmaceuticals

A new antibacterial compound from Luo Han Kuo fruit extract (Siraitia grosvenori)

Rapid Quantitation of Non-chromophoric Vigabatrin and Gabapentin by a Validated qNMR Method in Bulk Drug and Marketed Formulations

Proton nuclear magnetic resonance spectroscopy (NMR) methods for determining the purity of reference drug standards and illicit forensic drug seizures

Quantitative Profiling of Comprehensive Composition in Compound Herbal Injections: an NMR Approach Applied on Shenmai Injection

Purity determination of pyributicarb by internal standard correction–high-performance liquid chromatography–quantitative nuclear magnetic resonance

Molecular exchange dynamics in partially filled microscale and nanoscale pores of silica glasses studied by field-cycling nuclear magnetic resonance relaxometry.

A Quantitative ¹H Nuclear Magnetic Resonance (qhnmr) Method for Assessing the Purity of Iridoids and Secoiridoids.

Process Monitoring and Characterization for Extraction of Herbal Medicines Based on Proton (1H) Nuclear Magnetic Resonance Spectroscopy and Multivariate Batch Modeling: a Case Study

Process Characterization for Ethanol Precipitation of Salviae Miltiorrhizae Radix Et Rhizoma (danshen) Using 1H NMR Spectroscopy and Chemometrics

A Feasibility Study on the Non-Invasive Analysis of Bottled Compound E Jiao Oral Liquid Using Near Infrared Spectroscopy

生薬等の標準物質におけるqNMRの活用