Abstract:Physical fouling characteristics on silicon carbide (SiC) membranes induced by various organic matter compounds vary depending on the presence of calcium ions (Ca2+). Both destructive techniques (morphological surface analysis) and non-destructive techniques (fouling properties monitoring) were used to determine the fouling mechanisms and behavior during the membrane filtration systems. Destructive analysis and a modified Hermia model were employed to assess the fouling mechanisms. Fouling behavior was also analyzed through non-destructive monitoring techniques including optical coherence tomography (OCT) and three-dimensional laser scanning confocal microscopy (3D-LSM). At concentrations of 10, 30, and 100 mg/L without Ca2+, the flux decreased by 57-95% for humic acid (HA) and anionic polyacrylamide (APAM). APAM exhibited a notable removal rate of up to 56% without Ca2+. At concentration of 10, 30, and 100 mg/L in the absence of Ca2+, the flux decreased by 6-8% for sodium alginate (SA). However, the addition of Ca2+ led to a reduction in the flux for SA by up to 91% and resulted in a removal rate of 40%. Furthermore, addition of Ca2+ led to an alteration of the fouling characteristics of HA and SA. In the case of HA, higher concentrations resulted in elevated thickness and roughness with correlation coefficients of 0.991 and 0.992, respectively. For SA, increased SA concentration led to a thicker (correlation coefficient of 0.999) but smoother surfaces (correlation coefficients of 0.502). Monitoring of these physical characteristics of the fouling layer through non-destructive analysis is crucial for effective fouling management, optimization of the system performance and extending the lifespan of the membrane. By continuously assessing the fouling layer thickness and surface roughness, we expect to be able to provide insights on the fouling behavior, identify trends, that can help scientists and engineers to make informed decisions regarding fouling control strategies in future.

Solid-phase fluorescence excitation emission matrix for in-situ monitoring of membrane fouling during microfiltration using a polyvinylidene fluoride hollow fiber membrane

In Situ Visualization of Membrane Fouling Evolution during Ultrafiltration Using Label-Free Hyperspectral Light Sheet Fluorescence Imaging

Realtime and in-situ monitoring of membrane fouling with fiber-optic reflectance UV-vis spectrophotometry (FORUS)

Light sheet fluorescence microscopy applied for in situ membrane fouling characterization: The microscopic events of hydrophilic membrane in resisting DEX fouling

In situ visualization of combined membrane fouling behaviors using multi-color light sheet fluorescence imaging: A study with BSA and dextran mixture

Laser Induced Fluorescence (LIF) Technique Visualizes and Characterizes Concentration Polarization and Fouling Layer in the Cross-Flow Nanofiltration

Direct monitoring of membrane fouling and cleaning during ultrafiltration using a non-invasive ultrasonic technique

On line monitoring local fouling behavior of membrane filtration process by in situ hydrodynamic and electrical measurements

A new view of membrane fouling with 3D ultrasonic imaging techniques: Taking the canola oil with phospholipids for example

Probing Membrane Fouling Via Infrared Attenuated Total Reflection Mapping Coupled with Multivariate Curve Resolution

Spectroscopic Sensing of Membrane Fouling Potential in a Long-Term Running Anaerobic Membrane Bioreactor

Evaluation of Front-Face Fluorescence for Assessing Cyanobacteria Fouling in Ultrafiltration

In-situ monitoring techniques for membrane fouling and local filtration characteristics in hollow fiber membrane processes: A critical review

Surface Fouling Characterization Methods for Polymeric Membranes Using a Short Experimental Study

Quantitative source tracking for organic foulants in ultrafiltration membrane using stable isotope probing approach

Non-destructive monitoring and prediction of fouling by organic matters and residual anionic coagulant during membrane process

In situ engineering of an ultrathin polyamphoteric layer on polyketone-based thin film composite forward osmosis membrane for comprehensive anti-fouling performance

Online monitoring of particle fouling in a submerged membrane filtration system using a photointerrupt sensor array

Characterization of Fouling in Immersed Polyvinylidene Fluoride Hollow Fibre Membrane Ultrafiltration by Particles and Natural Organic Matter

Modeling of NF/RO membrane fouling and flux decline using real-time observations

Enhanced performance of conductive polysulfone/MWCNT/PANI ultrafiltration membrane in an online fouling monitoring application