Abstract:We present an ultra-broadband and low-modal-crosstalk mode multiplexer based on cascaded vertical directional couplers formed by adiabatic-tapered waveguides without mode conversion. The input and output ports of the mode multiplexer are designed in the same planar layer to meet the standard package requirement. We design and fabricate a three-mode mode multiplexer, which serves to spatially combine and separate the E11, E21 and E12 modes in the few-mode-core outputs without mode conversion with polymer material, where adiabatic tapers are utilized in the design of directional coupler to extend the operation wavelength and two pairs of directional couplers serve to suppress the modal crosstalks. We fabricate a typical device to demonstrate the idea. The fabricated device has a length of 29 mm, which provides coupling ratios higher than 97% and modal crosstalks lower than – 19.6 dB over the C+L band and beyond with weak polarization dependence. The proposed mode multiplexer is fiber capable and allows to connect with the few-mode fibers directly by the use of fan-in and fan-out technology. The proposed mode multiplexer is simple, scalable, and effective to extend the operation wavelength as well as suppressing the modal crosstalks, which provides a powerful device to manipulate the modes in a mode division multiplexing system and an effective method to realize an all-optical chip for simplifying the Multi-Input Multi-Output signal processing with low power consumption.

Mode division multiplexing of an all-fiber three-mode selective coupler

Design and Numerical Optimization of A Mode Multiplexer Based on Few-Mode Fiber Couplers

Optimization of Few-Mode-Fiber Based Mode Converter for Mode Division Multiplexing Transmission

Mode selective excitation techniques for few-mode fibers

Low-Loss All-Fiber Mode Multiplexers for Weakly-Coupled 4-Mode Fiber

Three-mode All-Optical (de)multiplexing on a SOI Chip

All-fiber Optical Mode Switching Based on Cascaded Mode Selective Couplers for Short-Reach MDM Networks

Weakly-coupled Mode-division-multiplexing Systems and Networks Supporting Large Quantity of Independent Modes

A segment-coupled six-mode multiplexer based on multi-core fiber

Three-mode Mode-Division-multiplexing Passive Optical Network over 12-Km Low Mode-Crosstalk FMF Using All-Fiber Mode MUX/DEMUX

Fabrication and Characterization of a Mode-selective 45-Mode Spatial Multiplexer based on Multi-Plane Light Conversion

Mode Couplers and Converters Based on Dual-Core Hollow-Core Photonic Bandgap Fiber

Recent Progress in Mode-Division Multiplexed Passive Optical Networks with Low Modal Crosstalk

Ultra-broadband multimode fiber-to-chip edge coupler based on periodically segmented waveguides

Weakly-coupled Mode Division Multiplexing over Conventional Multi-Mode Fiber with Intensity Modulation and Direct Detection

All-Optical Wavelength Conversion for Mode-Division Multiplexing Signals Using Four-Wave Mixing in A Dual-Mode Fiber

Weakly-coupled 7-core-2-LP-mode transmission using commercial SFP + transceivers enabled by all-fiber spatial multiplexer and demultiplexer.

Ultra-broadband and low-modal-crosstalk mode multiplexer based on cascaded vertical directional couplers formed by adiabatic-tapered waveguides without mode conversion

Mode-insensitive and mode-selective optical switch based on asymmetric Y-junctions and MMI couplers

Adjoint-optimized metasurfaces for compact mode-division multiplexing

Real-time channel selection in multi-mode multiplexing optical interconnection implemented by hybrid algorithm and material system