Zygomycosis Presenting as Acute Bilateral Renal Artery Thrombosis.

J. Singh,M. Singhal

2016-03-01

Abstract:

What problem does this paper attempt to address?

Design, syntheses and evaluation of hemocompatible pegylated-antimicrobial polymers with well-controlled molecular structures.

Shrinivas Venkataraman,Ying Zhang,Lihong Liu,Yi-Yan Yang

DOI: https://doi.org/10.1016/j.biomaterials.2009.11.030

IF: 14

2010-01-01

Biomaterials

Abstract:In this paper, we have designed and synthesized well-defined pegylated-polymers with tertiary amines from readily available commodity monomers 2-(dimethylamino)ethyl methacrylate (DMAEMA) and oligo(ethylene glycol) methyl ether methacrylate (OEGMA, Mn ∼ 475 Da) by reversible addition–fragmentation chain transfer (RAFT) polymerisation. By employing a simple and efficient post-polymerisation functionalization strategy, tertiary amines were quaternized to result in cationic polymers. By the careful selection of the functional halide, X–(CH2)q–R, (where in X=halide; R=the chemical functionality; q=the number of alkyl spacer between the quaternary ammonium group and R), a series of polymers with well-controlled molecular weight, different amphiphilic balance and chemical functionalities (such as alkyl, primary alcohol, primary amine and carboxylic acid) were readily synthesized. The antimicrobial activities of these cationic polymers were determined against Gram-positive bacteria Bacillus subtilis. Minimum inhibitory concentration (MIC), the polymer concentration to completely inhibit the bacterial growth, was found to be dependent both on the nature of functional group and the hydrophobicity of the polymer. Amongst the functional groups, both the alkyl and the alcohol groups were found to be effective, with MIC values in the range of 20–80mg/L. The haemolytic properties of polymers were analyzed against mouse red blood cells. The poymers with a short alkyl or hydroxyl group demonstrated little haemolysis, yet retained strong antimicrobial activity. The overall hydrophobicity of the polymer influenced its haemolytic behavior. These polymers can be promising antimicrobial agents. In addition, the approach proposed in this study to atom-efficient design and synthesis of antimicrobial polymers from the commercially available monomers can also be applied to develop well-defined functional cationic polymers for various biomedical applications.
Antimicrobial polymer coatings on surfaces: preparation and activity

Sangwon Ko,Jae-Young Lee,Duckshin Park,Kyunghoon Kim

DOI: https://doi.org/10.1007/s13233-024-00325-y

IF: 2.127

2024-09-14

Macromolecular Research

Abstract:Antimicrobial polymers have been intensively studied as a promising strategy to suppress the growth of microbes and mitigate the transmission of pathogens owing to their distinctive properties, such as high molecular weights, tunable structures, functionality, and polyvalency. Unlike the monomers, the repetitive structure and polyvalency of polymers enable robust interactions with the target surfaces to provide synergetic functionality. Antimicrobial polymers have a great variety of adjustable chain lengths and surface chemistry. Furthermore, their backbones can be functionalized with bioactive substituents to interact with cell membranes, lipids, and proteins. The surface coating methods and the resulting antimicrobial activities depend on polymer characteristics, such as the combination of monomers, synthetic methods, contact time, and substrates. This review focuses on representative antimicrobial polymers, including hydrophilic and ionic polymers, polysaccharides, and copolymers containing amine groups and quaternary ammonium cations (QACs). The surface application strategies and antimicrobial properties for each polymer type are also discussed to provide inspiration for the advanced design of antimicrobial polymers.

polymer science
Preparation and Functionalization of Polymers with Antibacterial Properties-Review of the Recent Developments

Monika Parcheta,Magdalena Sobiesiak

DOI: https://doi.org/10.3390/ma16124411

2023-06-15

Abstract:The presence of antibiotic-resistant bacteria in our environment is a matter of growing concern. Consumption of contaminated drinking water or contaminated fruit or vegetables can provoke ailments and even diseases, mainly in the digestive system. In this work, we present the latest data on the ability to remove bacteria from potable water and wastewater. The article discusses the mechanisms of the antibacterial activity of polymers, consisting of the electrostatic interaction between bacterial cells and the surface of natural and synthetic polymers functionalized with metal cations (polydopamine modified with silver nanoparticles, starch modified with quaternary ammonium or halogenated benzene). The synergistic effect of polymers (N-alkylaminated chitosan, silver doped polyoxometalate, modified poly(aspartic acid)) with antibiotics has also been described, allowing for precise targeting of drugs to infected cells as a preventive measure against the excessive spread of antibiotics, leading to drug resistance among bacteria. Cationic polymers, polymers obtained from essential oils (EOs), or natural polymers modified with organic acids are promising materials in the removal of harmful bacteria. Antimicrobial polymers are successfully used as biocides due to their acceptable toxicity, low production costs, chemical stability, and high adsorption capacity thanks to multi-point attachment to microorganisms. New achievements in the field of polymer surface modification in order to impart antimicrobial properties were summarized.
Biodegradable nanostructures with selective lysis of microbial membranes

Fredrik Nederberg,Ying Zhang,Jeremy P. K. Tan,Kaijin Xu,Huaying Wang,Chuan Yang,Shujun Gao,Xin Dong Guo,Kazuki Fukushima,Lanjuan Li,James L. Hedrick,Yi-Yan Yang

DOI: https://doi.org/10.1038/NCHEM.1012

IF: 24.274

2011-01-01

Nature Chemistry

Abstract:Macromolecular antimicrobial agents such as cationic polymers and peptides have recently been under an increased level of scrutiny because they can combat multi-drug-resistant microbes. Most of these polymers are non-biodegradable and are designed to mimic the facially amphiphilic structure of peptides so that they may form a secondary structure on interaction with negatively charged microbial membranes. The resulting secondary structure can insert into and disintegrate the cell membrane after recruiting additional polymer molecules. Here, we report the first biodegradable and in vivo applicable antimicrobial polymer nanoparticles synthesized by metal-free organocatalytic ring-opening polymerization of functional cyclic carbonate. We demonstrate that the nanoparticles disrupt microbial walls/membranes selectively and efficiently, thus inhibiting the growth of Gram-positive bacteria, methicillin-resistant Staphylococcus aureus (MRSA) and fungi, without inducing significant haemolysis over a wide range of concentrations. These biodegradable nanoparticles, which can be synthesized in large quantities and at low cost, are promising as antimicrobial drugs, and can be used to treat various infectious diseases such as MRSA-associated infections, which are often linked with high mortality.
Improvement of antibacterial activity of polysaccharides via chemical modification: A review

Zichao Wang,Yi Zheng,Yiwei Hu,Libo Yang,Xirui Liu,Renyong Zhao,Minjie Gao,Zhitao Li,Yingjie Feng,Yongming Xu,Na Li,Jinchu Yang,Qi Wang,Lemei An

DOI: https://doi.org/10.1016/j.ijbiomac.2024.132163

Abstract:Antibiotic residue and bacterial resistance induced by antibiotic abuse have seriously threatened food safety and human healthiness. Thus, the development and application of safe, high-efficiency, and environmentally friendly antibiotic alternatives are urgently necessary. Apart from antitumor, antivirus, anti-inflammatory, gut microbiota regulation, immunity improvement, and growth promotion activities, polysaccharides also have antibacterial activity, but such activity is relatively low, which cannot satisfy the requirements of food preservation, clinical sterilization, livestock feeding, and agricultural cultivation. Chemical modification not only provides polysaccharides with better antibacterial activity, but also promotes easy operation and large-scale production. Herein, the enhancement of the antibacterial activity of polysaccharides via acetylation, sulfation, phosphorylation, carboxymethylation, selenation, amination, acid graft, and other chemical modifications is reviewed. Meanwhile, a new trend on the application of loading chemically modified polysaccharides into nanostructures is discussed. Furthermore, possible limitations and future recommendations for the development and application of chemically modified polysaccharides with better antibacterial activity are suggested.
Surface antimicrobial functionalization with polymers: fabrication, mechanisms and applications

Chen-Gang Wang,Nayli Erdeanna Binte Surat'man,Justin Jian Qiang Mah,Chenyang Qu,Zibiao Li

DOI: https://doi.org/10.1039/d2tb01555b

IF: 7.571

2022-01-01

Journal of Materials Chemistry B

Abstract:In this review, the development, mechanism and applications of antimicrobial surfaces with polymer-based modification strategies are highlighted.

materials science, biomaterials
Recent Developments in Antimicrobial and Antiviral Agents Based on Natural/Synthetic Polymers and Dendrimers: Design and Therapeutic Applications

Ahmad Abd‐El‐Aziz,Moustafa M.G. Fouda,Carmen M. Sharaby,Ouyang Xiao,Xinyue Zhang,Yahya A. Alzahrany,Saleh A. Ahmed,Ning Ma,Alaa S. Abd‐El‐Aziz

DOI: https://doi.org/10.1002/macp.202400123

IF: 2.996

2024-05-30

Macromolecular Chemistry and Physics

Abstract:This review article explores the recent innovations in the field of antimicrobial and antiviral macromolecules. With the rising challenge of antibiotic resistance, as well as the overuse of antibiotics, there is a growing demand for efficient solutions to combat microbial and viral infections. The development of new effective antimicrobial and antiviral agents is highlighted. This review was designed to give a comprehensive view of the literature focusing on a few examples of combating microbial and viral infections in each section. A brief description of naturally occurring organic‐based materials that exhibited antimicrobial and/or antiviral activities is presented, focusing on polysaccharides, peptides and proteins. Synthetic organic‐based materials are divided into subsections including polymers, dendrimers, and nanomaterials. The synthesis and applications of inorganic materials such as polyphosphazenes and polysiloxanes, as well as tin‐, germanium‐ and gallium‐based materials are emphasized in this review. Organometallic macromolecules are also described, and their antimicrobial and antiviral activities are examined. Overall, this article provides a comprehensive overview of recent advancements in the design of antimicrobial and antiviral macromolecules, offering valuable insights into their potential applications in biomedical research and combating drug‐resistant microorganisms and viruses. This article is protected by copyright. All rights reserved

polymer science
Natural and synthetic polymeric antimicrobials with quaternary ammonium moieties: a review

Anca Giorgiana Grigoras

DOI: https://doi.org/10.1007/s10311-021-01215-w

IF: 13.615

2021-03-17

Environmental Chemistry Letters

Abstract:The excessive use of antibiotics has led to the development of antimicrobial resistance and, in turn, to the inefficiency of actual drugs. Therefore, scientists have recently focused on conceiving new antimicrobials with a longer duration of action and a minimum environmental toxicity, such as polymers modified with quaternary ammonium moieties. Indeed, these quaternary ammonium moieties have a net positive charge that interacts better with and inhibit negatively charged microorganisms. This article reviews natural and synthetic polymers modified with quaternary ammonium moieties with focus on biocompatible polymers. Polymers include cashew gum, cellulose, chitosan, dextran, polylactide, pullulan, starch, polyamidoamine, polyurethane, polysiloxane, polymethacrylate and polyethylene. The interaction of new antimicrobials with a wide range of bacteria and fungi is controlled by microenvironmental factors and polymer properties. The use of other functional groups or chemical compounds in synergy with quaternary ammonium moieties is actually emerging to improve the efficiency.

environmental sciences,engineering, environmental,chemistry, multidisciplinary
Synthesis and antibacterial properties of fluorinated biodegradable cationic polyesters

Zhao-Yue Li,Xiaoying Zhang,Yi-Lin Qian,Fusheng Du,Zichen Li

DOI: https://doi.org/10.1039/d3tb02578k

IF: 7.571

2024-01-12

Journal of Materials Chemistry B

Abstract:Antimicrobial peptide-mimicking antibacterial polymers represent a practical strategy to conquer the ever-growing threat of antimicrobial resistance. Herein, we report the syntheses and antibacterial performance of degradable amphiphilic cationic polyesters containing pendent quaternary ammonium motif and hydrophobic alkyl or fluoroalkyl groups. These polyesters were conveniently prepared from poly(3-methylene-1,5-dioxepan-2-one) by the highly efficient one-pot successive thiol-Michael addition reactions. The antibacterial activity of these polyesters against S. aureus and E. coli and their hemolytic activity toward red blood cells were evaluated, some of them showed moderate antibacterial activity and selectivity against Gram-positive S. aureus. The membrane disruption mechanism of these cationic polyesters was briefly explored by monitoring the bacteria killing kinetics and SEM observations. Moreover, the effects of cationic/hydrophobic ratio and the incorporation of fluoroalkyl group on the antibacterial activity and selectivity of the polyesters were demonstrated.

materials science, biomaterials
On Antimicrobial Polymers: Development, Mechanism of Action, International Testing Procedures, and Applications

Saleh Alkarri,Hawra Bin Saad,Maria Soliman

DOI: https://doi.org/10.3390/polym16060771

IF: 5

2024-03-12

Polymers

Abstract:The development of antimicrobial polymeric materials has evolved into one of the more promising methods for preventing the growth of microbes and mitigating the spread of infectious diseases in several applications including the health and food packaging sectors. The outbreak of global pandemics, and particularly the recent COVID-19 pandemic, further strengthen the importance of developing such solutions. This review paper presents a fundamental understanding of how antimicrobial polymers are developed, describes the possible surface modification approaches to render polymers with antimicrobial properties, highlights the potential mechanism of action against a range of microorganisms (bacterial, viral, and fungal), and details some of the international standard protocols and procedures to evaluate the antimicrobial properties of modified materials (such as plastics and textiles). In addition, this review paper discusses the toxicity of antimicrobial additives when used in healthcare and food packaging applications.

polymer science
Catechol-Based Antimicrobial Polymers

Seyedehfatemeh Razaviamri,Kan Wang,Bo Liu,Bruce P Lee,Bruce P. Lee

DOI: https://doi.org/10.3390/molecules26030559

IF: 4.6

2021-01-21

Molecules

Abstract:Catechol is a key constituent in mussel adhesive proteins and is responsible for strong adhesive property and crosslinking formation. Plant-based polyphenols are also capable of chemical interactions similar to those of catechol and are inherently antimicrobial. This review reports a series of catechol-based antimicrobial polymers classified according to their antimicrobial mechanisms. Catechol is utilized as a surface anchoring group for adhering monomers and polymers of known antimicrobial properties onto various types of surfaces. Additionally, catechol’s ability to form strong complexes with metal ions and nanoparticles was utilized to sequester these antimicrobial agents into coatings and polymer matrices. During catechol oxidation, reactive oxygen species (ROS) is generated as a byproduct, and the use of the generated ROS for antimicrobial applications was also introduced. Finally, polymers that utilized the innate antimicrobial property of halogenated catechols and polyphenols were reviewed.

chemistry, multidisciplinary,biochemistry & molecular biology
Antimicrobial Guanidinylate Polycarbonates Show Oral in Vivo Efficacy Against Clostridioides Difficile

Menglin Xue,Soumyadeep Chakraborty,Ruixuan Gao,Shaohui Wang,Meng Gu,Ning Shen,Lulu Wei,Chuanhai Cao,Xingmin Sun,Jianfeng Cai

DOI: https://doi.org/10.1002/adhm.202303295

IF: 10

2024-02-08

Advanced Healthcare Materials

Abstract:The emerging antibiotic resistance has been named by the World Health Organization (WHO) as one of the top 10 threats to public health. Notably, methicillin‐resistant Staphylococcus aureus (MRSA) and vancomycin‐resistant Enterococcus faecalis (VREF) are designated as serious threats, whereas Clostridioides difficile (C. difficile) is recognized as one of the most urgent threats to human health and unmet medical need. Among different strategies to combat these bacteria, host‐defense peptide (HDP) – mimicking polymer materials are found to be versatile and promising. However, the vast majority of antibiotic polymer applications were limited to topical application due to their potential systematic toxicity. Herein, we report the design and application of novel biodegradable polymers – the lipidated antimicrobial guanidinylate polycarbonates. These polymers showed potent antimicrobial activity against a panel of Gram‐negative and Gram‐positive bacteria with fast‐killing kinetics and low resistance development tendency. The mechanism of the bacterial killing process was investigated, which suggested that the antimicrobial activity of the polymer was mainly due to bacterial membrane disruption, analogous to that of HDPs. More importantly, the optimal polymer showed excellent antibacterial activity against C. difficile infection (CDI) in vivo via oral administration, which is very unusual as polymer applications are generally limited to injection. In addition, compared with vancomycin, the standard drug for the treatment of CDI but suffers from short protective efficacy and a high relapse rate, the polymer demonstrated a much‐prolonged therapeutic effect and virtually diminished recurrence rate of CDI. The convenient synthesis, easy scale‐up, low cost, as well as biodegradability of this class of polycarbonates, together with their in vitro broad‐spectrum antimicrobial activity and orally in vivo efficacy against CDI, suggest the great potential of lipidated guandinylate polycarbonates as a new class of antibacterial biomaterials to treat CDI and combat emerging antibiotic resistance. This article is protected by copyright. All rights reserved

nanoscience & nanotechnology,engineering, biomedical,materials science, biomaterials
Biodegradable Broad-Spectrum Antimicrobial Polycarbonates: Investigating The Role Of Chemical Structure On Activity And Selectivity

Willy Chin,Chuan Yang,Victor Wee Lin Ng,Yuan Huang,Junchi Cheng,Yenwah Tong,Daniel J. Coady,Weimin Fan,James L. Hedrick,Yiyan Yang

DOI: https://doi.org/10.1021/ma4019685

IF: 5.5

2013-01-01

Macromolecules

Abstract:A series of biodegradable polycarbonate polymers was designed and synthesized via organocatalytic ring-opening polymerization of functional cyclic carbonate monomer (MTC-OCH2BnCl). By adopting a facile post-polymerization functionalization strategy, the polycarbonates were quaternized to yield cationic polymers with quaternary ammonium groups of various pendant structures (e.g., alkyl, aromatic, imidazolinium). The biological properties of these polymers were investigated by microbial growth inhibition assays against clinically relevant Gram-positive and Gram-negative bacteria, fungus as well as hemolysis assays using rat red blood cells. A judicious choice in the structure of the cationic appendages elucidated that the amphiphilic balance of the polymers is a pertinent determinant to render substantial antimicrobial potency and low hemolysis, consequently affording the polymer pButyl_20 (degree of polymerization, 20; quaternary ammonium group, N,N-dimethylbutylammonium) as a highly efficacious and nonhemolytic antimicrobial agent with a remarkable selectivity of more than 1026. To ameliorate the selectivity against a wider spectrum of microbes including the difficult-to-kill Pseudomonas aeruginosa, it was shown that polymers containing N,N-dimethylbutylammonium and N,N-dimethylbenzylammonium groups in 1:1 molar ratio exerted considerable antimicrobial potency while remaining relatively nonhemolytic. Biophysical studies encompassing the determination of water-octanol partition coefficients (log P) and dye leakage studies from model liposomes provided useful insights which delineate the pivotal role of cationic group structure in the antimicrobial activity and mechanism of these polymers. Through field emission scanning electron microscopy (FE-SEM), a physical lysis of microbial cell membranes was deemed operative in the antimicrobial action of these macromolecular agents, which would consequently reduce the propensity toward resistance development. These polymers are envisaged to be promising antimicrobial agents for the prevention and treatment of multidrug-resistant pathogenic infections.
Biodegradable Polymers and Polymer Composites with Antibacterial Properties

Anna Smola-Dmochowska,Kamila Lewicka,Alicja Macyk,Piotr Rychter,Elżbieta Pamuła,Piotr Dobrzyński

DOI: https://doi.org/10.3390/ijms24087473

IF: 5.6

2023-04-19

International Journal of Molecular Sciences

Abstract:Antibiotic resistance is one of the greatest threats to global health and food security today. It becomes increasingly difficult to treat infectious disorders because antibiotics, even the newest ones, are becoming less and less effective. One of the ways taken in the Global Plan of Action announced at the World Health Assembly in May 2015 is to ensure the prevention and treatment of infectious diseases. In order to do so, attempts are made to develop new antimicrobial therapeutics, including biomaterials with antibacterial activity, such as polycationic polymers, polypeptides, and polymeric systems, to provide non-antibiotic therapeutic agents, such as selected biologically active nanoparticles and chemical compounds. Another key issue is preventing food from contamination by developing antibacterial packaging materials, particularly based on degradable polymers and biocomposites. This review, in a cross-sectional way, describes the most significant research activities conducted in recent years in the field of the development of polymeric materials and polymer composites with antibacterial properties. We particularly focus on natural polymers, i.e., polysaccharides and polypeptides, which present a mechanism for combating many highly pathogenic microorganisms. We also attempt to use this knowledge to obtain synthetic polymers with similar antibacterial activity.

biochemistry & molecular biology,chemistry, multidisciplinary
Polymeric Materials with Antibacterial Activity: A Review

Dania Olmos,Javier González-Benito

DOI: https://doi.org/10.3390/polym13040613

IF: 5

2021-02-18

Polymers

Abstract:Infections caused by bacteria are one of the main causes of mortality in hospitals all over the world. Bacteria can grow on many different surfaces and when this occurs, and bacteria colonize a surface, biofilms are formed. In this context, one of the main concerns is biofilm formation on medical devices such as urinary catheters, cardiac valves, pacemakers or prothesis. The development of bacteria also occurs on materials used for food packaging, wearable electronics or the textile industry. In all these applications polymeric materials are usually present. Research and development of polymer-based antibacterial materials is crucial to avoid the proliferation of bacteria. In this paper, we present a review about polymeric materials with antibacterial materials. The main strategies to produce materials with antibacterial properties are presented, for instance, the incorporation of inorganic particles, micro or nanostructuration of the surfaces and antifouling strategies are considered. The antibacterial mechanism exerted in each case is discussed. Methods of materials preparation are examined, presenting the main advantages or disadvantages of each one based on their potential uses. Finally, a review of the main characterization techniques and methods used to study polymer based antibacterial materials is carried out, including the use of single force cell spectroscopy, contact angle measurements and surface roughness to evaluate the role of the physicochemical properties and the micro or nanostructure in antibacterial behavior of the materials.

polymer science
ACTIVE VIBRATION SUPPRESSION R&D FOR THE NLC*

J. Frisch,Linda Hendirckson,T. Himel,A. Seryi

DOI: https://doi.org/10.2172/798941

2001-12-14

Abstract:The nanometer scale beam sizes at the interaction point in linear colliders limit the allowable motion of the final focus magnets. We have constructed a prototype system to investigate the use of active vibration damping to control magnet motion. Inertial sensors are used to measure the position of a test mass, and a DSP based system provides feedback using electrostatic pushers. Simulation and experimental results for the control of a mechanically simple system are presented.
Highly Potent Antimicrobial Polyionenes with Rapid Killing Kinetics, Skin Biocompatibility and in Vivo Bactericidal Activity.

Shaoqiong Liu,Robert J Ono,Hong Wu,Jye Yng Teo,Zhen Chang Liang,Kaijin Xu,Musan Zhang,Guansheng Zhong,Jeremy P K Tan,Michelle Ng,Chuan Yang,Julian Chan,Zhongkang Ji,Chang Bao,Kiran Kumar,Shujun Gao,Ashlynn Lee,Mareva Fevre,Huihui Dong,Jackie Y Ying,Lanjuan Li,Weimin Fan,James L Hedrick,Yi Yan Yang

DOI: https://doi.org/10.1016/j.biomaterials.2017.02.027

IF: 14

2017-01-01

Biomaterials

Abstract:Effective antimicrobial agents are important arsenals in our perennial fight against communicable diseases, hospital-acquired and surgical site multidrug-resistant infections. In this study, we devise a strategy for the development of highly efficacious and skin compatible yet inexpensive water-soluble macromolecular antimicrobial polyionenes by employing a catalyst-free, polyaddition polymerization using commercially available monomers. A series of antimicrobial polyionenes are prepared through a simple polyaddition reaction with both polymer-forming reaction and charge installation occurring simultaneously. The compositions and structures of polymers are modulated to study their effects on antimicrobial activity against a broad spectrum of pathogenic microbes. Polymers with optimized compositions have potent antimicrobial activity with low minimum inhibitory concentrations of 1.95-7.8 μg/mL and high selectivity over mammalian cells. In particular, a killing efficiency of more than 99.9% within 2 min is obtained. Moreover, the polymers demonstrate high antimicrobial efficacy against various clinically-isolated multidrug-resistant microbes, yet exhibit vastly superior skin biocompatibility in mice as compared to other clinically used surgical scrubs (chlorhexidine and betadine). Microbicidal activity of the polymer is mediated via membrane lysis as demonstrated by confocal microscopy. Unlike small molecular antibiotics, repeated use of the polymer does not induce drug resistance. More importantly, the polymer shows excellent bactericidal activity in a P. aeruginosa-contaminated mouse skin model. Given their rapid and efficacious microbicidal activity and skin compatibility, these polymers have tremendous potential to be developed as surgical scrubs/hand sanitizers to prevent multidrug-resistant infections.
Synthesis, Characterization and Antibacterial Activity of Novel β-cyclodextrin Polyurethane Materials

Yuexing Chen,Jun Yan,Yubin Zhang,Wenwen Chen,Zefeng Wang,Lingnan Wang

DOI: https://doi.org/10.1007/s10924-021-02255-7

IF: 4.705

2021-08-07

Journal of Polymers and the Environment

Abstract:The advanced water treatment taken by organic micro-pollution or microbiological pollution water resource has been a hot issue of public concern. In this article, novel quaternary ammonium salt functionalized β-cyclodextrin polyurethane (QAS-β-CDPU) microparticles were successfully constructed for above-mentioned pollutants removal. By adjusting the proportion of the chlorine-containing monomers, we studied the effect of different quaternization degree (0%, 20%, 40%, 60%) on solvent resistance and thermal stability. Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) are recognized as significant human bacterial pathogens, which were used as model bacteria to investigate the antibacterial activity by contact-killing tests. Methylene blue (MB) served as a toxic organic model to quantify the dye wastewater remediation efficiency. Research shows that the reaction of β-cyclodextrin and diisocyanate can form a cyclodextrin-based carbamate network structure. Since both the cyclodextrin cavity and the carbamate network may remove the dye, the obtained polymer has a double advantage. Besides, the presence of quaternary ammonium groups enables QAS-β-CDPU microparticles to possess good bactericidal properties. When the quaternization degree is 60%, sterilization rates of QAS-β-CDPU microparticles are over 96% for S. aureus and E. coli. On basis of this simple, green and economical synthetic route, QAS-β-CDPU microparticles have the potential to become an ideal multifunctional material in water purification.Graphic Novel quaternary ammonium salt functionalized β-cyclodextrin polyurethane (QAS-β-CDPU) microparticles were successfully constructed for removing bacteria and dyes from wastewater.

engineering, environmental,polymer science
Eco-Friendly Cellulose-Based Nonionic Antimicrobial Polymers with Excellent Biocompatibility, Nonleachability, and Polymer Miscibility

Xugang Dang,Zhenfu Yu,Xuechuan Wang,Nan Li

DOI: https://doi.org/10.1021/acsami.3c10902

IF: 9.5

2023-10-21

ACS Applied Materials & Interfaces

Abstract:This study aims to prepare natural biomass-based nonionic antimicrobial polymers with excellent biocompatibility, nonleachability, antimicrobial activity, and polymer miscibility. Two new cellulose-based nonionic antimicrobial polymers (MIPA and MICA) containing many terminal indole groups were synthesized using a sustainable one-pot method. The structures and properties of the nonionic antimicrobial polymers were characterized using nuclear magnetic resonance hydrogen spectroscopy (1H NMR),...

materials science, multidisciplinary,nanoscience & nanotechnology
Naturally-Sourced Antibacterial Polymeric Nanomaterials with Special Reference to Modified Polymer Variants

Marian Rofeal,Fady Abdelmalek,Alexander Steinbüchel

DOI: https://doi.org/10.3390/ijms23084101

IF: 5.6

2022-04-07

International Journal of Molecular Sciences

Abstract:Despite the recent advancements in treating bacterial infections, antibiotic resistance (AR) is still an emerging issue. However, polymeric nanocarriers have offered unconventional solutions owing to their capability of exposing more functional groups, high encapsulation efficiency (EE) and having sustained delivery. Natural polymeric nanomaterials (NMs) are contemplated one of the most powerful strategies in drug delivery (DD) in terms of their safety, biodegradability with almost no side effects. Every nanostructure is tailored to enhance the system functionality. For example, cost-effective copper NPs could be generated in situ in cellulose sheets, demonstrating powerful antibacterial prospects for food safety sector. Dendrimers also have the capacity for peptide encapsulation, protecting them from proteolytic digestion for prolonged half life span. On the other hand, the demerits of naturally sourced polymers still stand against their capacities in DD. Hence, Post-synthetic modification of natural polymers could play a provital role in yielding new hybrids while retaining their biodegradability, which could be suitable for building novel super structures for DD platforms. This is the first review presenting the contribution of natural polymers in the fabrication of eight polymeric NMs including particulate nanodelivery and nanofabrics with antibacterial and antibiofilm prospects, referring to modified polymer derivatives to explore their full potential for obtaining sustainable DD products.

biochemistry & molecular biology,chemistry, multidisciplinary

Zygomycosis Presenting as Acute Bilateral Renal Artery Thrombosis.

Design, syntheses and evaluation of hemocompatible pegylated-antimicrobial polymers with well-controlled molecular structures.

Antimicrobial polymer coatings on surfaces: preparation and activity

Preparation and Functionalization of Polymers with Antibacterial Properties-Review of the Recent Developments

Biodegradable nanostructures with selective lysis of microbial membranes

Improvement of antibacterial activity of polysaccharides via chemical modification: A review

Surface antimicrobial functionalization with polymers: fabrication, mechanisms and applications

Recent Developments in Antimicrobial and Antiviral Agents Based on Natural/Synthetic Polymers and Dendrimers: Design and Therapeutic Applications

Natural and synthetic polymeric antimicrobials with quaternary ammonium moieties: a review

Synthesis and antibacterial properties of fluorinated biodegradable cationic polyesters

On Antimicrobial Polymers: Development, Mechanism of Action, International Testing Procedures, and Applications

Catechol-Based Antimicrobial Polymers

Antimicrobial Guanidinylate Polycarbonates Show Oral in Vivo Efficacy Against Clostridioides Difficile

Biodegradable Broad-Spectrum Antimicrobial Polycarbonates: Investigating The Role Of Chemical Structure On Activity And Selectivity

Biodegradable Polymers and Polymer Composites with Antibacterial Properties

Polymeric Materials with Antibacterial Activity: A Review

ACTIVE VIBRATION SUPPRESSION R&D FOR THE NLC*

Highly Potent Antimicrobial Polyionenes with Rapid Killing Kinetics, Skin Biocompatibility and in Vivo Bactericidal Activity.

Synthesis, Characterization and Antibacterial Activity of Novel β-cyclodextrin Polyurethane Materials

Eco-Friendly Cellulose-Based Nonionic Antimicrobial Polymers with Excellent Biocompatibility, Nonleachability, and Polymer Miscibility

Naturally-Sourced Antibacterial Polymeric Nanomaterials with Special Reference to Modified Polymer Variants