Abstract:Canal controllability is an open and significant topic that addresses the unreliability/uncertainty in water delivery, efficiency, and modernization in the irrigation system. The study developed an analysis tool for canal controllability to estimate controllable performance and reduce the uncertainty of water delivery under steady and unsteady flow. We designed a linear quadratic control algorithm and applied it to the Nongchang test canal to verify the tool reliability and improve efficiency of water utilization. Finally, the effects of hydraulic variables on canal controllability were quantified. The numerical model of unsteady flow showed satisfactory predictions of water level (correlation coefficient, root mean square error, and mean absolute percentage error were 0.929%, 0.293%, and 12.86%, respectively). The Nongchang test canal was rather controllable (controllability indicator 0.265 to 0.279), implying that linear quadratic control algorithm was appropriate. The algorithm performed well under all conditions tested; the maximum absolute error was 3.66%-8.65%. The water level remained stable (deviation usually less than 0.05 m) and water delivery met user demands in terms of flow rate (the measure of performance relative to adequacy was 92.51%-98.94%) with relatively small gate movements. The bottom slope and roughness were the principal contributors to controllable performance, explaining approximately 46% of the variance. Specifically, controllability was highest when the bottom slope was low, and the roughness and side slope were high. We offer a reliable and flexible tool for assessment of canal controllability. Study results demonstrated that stakeholders benefit when conventional canal operation is modernized. The work will guide automation and upgrading of canal hardware as irrigation becomes optimized.

Hybrid feedforward-feedback LQR controller based on model prediction for open channel water level control

A Digital Dual-Mode Lqr Optimal Controller for Boost Converter over A Wide Operation Range

Digital LQR Steady-State Optimal Control with Feedforward for Nonminimum Phase Boost DC-DC Converter

Dual-Mode Lqr-Feedforward Optimal Control for Non-Minimum Phase Boost Converter

A Two-stage Optimal Controller for Hydraulic Loading System with Mechanical Compensation

Improved Control Using PFC and Modified Linear Quadratic Regulator for a Kind of Nonlinear Systems

A Model Predictive Water-Level Difference Control Method for Automatic Control of Irrigation Canals

Design and Simulation of a Foreseeable Algorithm for Canals

1 A Model Predictive Water-Level Difference 2 Control Method for Automatic Control of Irrigation 3 Canals 4

An Adaptive Predictive Control Algorithm for Comprehensive Dendritic Canal Systems

State feedback controller without steady-state error for water level in regulating reservoir of cascade hydropower plants

Intelligent robust control for nonlinear complex hydro-turbine regulation system based on a novel state space equation and dynamic feedback linearization

Research on low-energy consumption automatic real-time regulation of cascade gates and pumps in open-canal based on reinforcement learning

An Adaptive Robust Controller for Hydraulic Robotic Manipulators with a Flow-Mapping Compensator

Strategy for Water Level Control Based on Prediction Control Feedback Model

Canal Controllability Identification Based on Automation Theory to Improve Water Delivery Efficiency in Irrigation Canal Systems

A Linear Quadratic Regulation Controller Based on Radial Basis Function Network Approximation

Constrained Model Predictive Control Algorithm for Cascaded Irrigation Canals

A lateral and longitudinal control method based on linear quadratic regulator for intelligent vehicles considering future path changes

Study on Control Characteristics of Sluice Regulation Systems for Long Distance Canal

Design and Evaluation of Control Systems for a Real Canal