Programmed autophagy in the Drosophila fat body is induced by ecdysone through regulation of the PI3K pathway.

T. Rusten,Karine Lindmo,G. Juhász,M. Sass,P. Seglen,A. Brech,H. Stenmark

DOI: https://doi.org/10.1016/J.DEVCEL.2004.07.005

IF: 13.417

2004-08-01

Developmental Cell

Abstract:

What problem does this paper attempt to address?

A molecular density functional theory for associating fluids in 3D geometries

Antoine Barthes,Thomas Bernet,David Grégoire,Christelle Miqueu

DOI: https://doi.org/10.1063/5.0180795

IF: 4.304

2024-02-05

The Journal of Chemical Physics

Abstract:A new free-energy functional is proposed for inhomogeneous associating fluids. The general formulation of Wertheim’s thermodynamic perturbation theory is considered as the starting point of the derivation. We apply the hypotheses of the statistical associating fluid theory in the classical density functional theory (DFT) framework to obtain a tractable expression of the free-energy functional for inhomogeneous associating fluids. Specific weighted functions are introduced in our framework to describe association interactions for a fluid under confinement. These weighted functions have a mathematical structure similar to the weighted densities of the fundamental-measure theory (i.e., they can be expressed as convolution products) such that they can be efficiently evaluated with Fourier transforms in a 3D space. The resulting free-energy functional can be employed to determine the microscopic structure of inhomogeneous associating fluids of arbitrary 3D geometry. The new model is first compared with Monte Carlo simulations and previous versions of DFT for a planar hard wall system in order to check its consistency in a 1D case. As an example of application in a 3D configuration, we then investigate the extreme confinement of an associating hard-sphere fluid inside an anisotropic open cavity with a shape that mimics a simplified model of zeolite. Both the density distribution and the corresponding molecular bonding profile are given, revealing complementary information to understand the structure of the associating fluid inside the cavity network. The impact of the degree of association on the preferential positions of the molecules inside the cavity is investigated as well as the competition between association and steric effect on adsorption.

chemistry, physical,physics, atomic, molecular & chemical
Beyond the mean-field approximation for pair correlations in classical density functional theory: Reference inhomogeneous non-associating monomeric fluids for use with SAFT-VR Mie DFT

Thomas Bernet,Srikanth Ravipati,Harry Cárdenas,Erich A Müller,George Jackson

DOI: https://doi.org/10.1063/5.0219968

2024-09-07

Abstract:A free-energy functional is presented to explicitly take into account pair correlations between molecules in inhomogeneous fluids. The framework of classical density functional theory (DFT) is used to describe the variation in the density of molecules interacting through a Mie (generalized Lennard-Jones) potential. Grand Canonical Monte Carlo simulations are performed for the systems to validate the new functional. The statistical associating fluid theory developed for Mie fluids (SAFT-VR Mie) is selected as a reference for the homogeneous bulk limit of the DFT and is applied here to systems of spherical non-associating particles. The importance of a correct description of the pair correlations for a reliable representation of the free energy in the development of the equation of state is duly noted. Following the Barker-Henderson high-temperature expansion, an analogous formulation is proposed from the general DFT formalism to develop an inhomogeneous equivalent of the SAFT-VR Mie free energy as a functional of the one-body density. In order to make use of this new functional in adsorption studies, a non-local version of the DFT is considered, with specific weighted densities describing the effects of neighboring molecules. The computation of these quantities is possible in three-dimensional space for any pore geometry with repulsive or attractive walls. We showcase examples to validate the new functional, revealing a very good agreement with molecular simulation. The new SAFT-DFT approach is well-adapted to describe realistic complex fluids.
Density Functional Theory for Inhomogeneous Mixtures of Polymeric Fluids

YX Yu,JZ Wu

DOI: https://doi.org/10.1063/1.1491240

2002-01-01

Abstract:A new density functional theory is developed for inhomogeneous mixtures of polymeric fluids by combining Rosenfeld’s fundamental-measure theory for excluded volume effects with Wertheim’s first-order thermodynamic perturbation theory for chain connectivity. With no adjustable parameters, theoretical predictions are in excellent agreement with Monte Carlo simulation data for the density distributions and for the adsorption isotherms of hard-sphere chains near hard walls or in slit-like pores. This theory is applied to calculate the force between two parallel hard walls separated by hard-sphere chains at different densities. Calculated results indicate that the chain-mediated force is attractive and decays monotonically with separation at low chain densities, it oscillates at high chain densities and in between, it is attractive at small separation and repulsive at large separation. This new density functional theory is simpler than similar theories in the literature and is directly applicable to mixtures.
A Density Functional Theory with a Mean-Field Weight Function: Applications to Surface Tension, Adsorption, and Phase Transition of a Lennard-Jones Fluid in a Slit-Like Pore.

Bo Peng,Yang-Xin Yu

DOI: https://doi.org/10.1021/jp805697p

2008-01-01

Abstract:A new density functional theory (DFT) for an inhomogeneous 12-6 Lennard-Jones fluid is proposed based on the modified fundamental measure theory for repulsive interaction and a weighted density functional for attractive interaction. The Helmholtz free energy functional for the attractive part is constructed using the modified Benedict-Webb-Rubin equation of state with a mean-field weight function. Comparisons of the theoretical results with molecular simulation data suggest that the new DFT yields accurate bulk surface tension, density distributions, adsorption-desorption isotherms, pore pressures, and capillary phase transitions for the Lennard-Jones fluid confined in slitlike pores with different widths and solid-fluid interactions. The new DFT reproduces well the vapor-liquid critical temperatures of the confined Lennard-Jones fluid, whereas the mean-field theory always overestimates the critical temperatures. Because the new DFT is computationally as simple and efficient as the mean-field theory, it will provide a good reference for further development of a statistical-thermodynamic theory of complex fluid under both homogeneous and inhomogeneous conditions when disperse force has to be considered.
Prediction of interfacial structure and tension of binary mixtures containing carbon dioxide

Jinyu Hu,Jian Chen,Jianguo Mi

DOI: https://doi.org/10.1021/ie201783v

2012-01-01

Industrial & Engineering Chemistry Research

Abstract:In this work, a density functional approach was applied to describe the interfacial thermodynamic properties of CO2 binary mixtures including CO2 + heptane, CO2 + acetone, CO2 + ethanol, and CO2 + water. In the theoretical model, the first-order mean spherical approximation statistical associating fluid theory (FMSA-SAFT) was incorporated to describe the chemical potential of the bulk term, while, for inhomogeneous potential, the modified fundamental measure theory (MFMT) was employed to describe the hard sphere contribution, and a weighted density approximation was adopted for the attractive contribution. Without any adjustable parameter, the theoretical calculations have been well-testified by the available experimental data, showing a good predictive capability of the theory to the interfacial structure and tensions of CO2 binary mixtures with nonpolar, polar, and associating fluids.
A Novel Weighted Density Functional Theory for Adsorption, Fluid-Solid Interfacial Tension, and Disjoining Properties of Simple Liquid Films on Planar Solid Surfaces

Yang-Xin Yu

DOI: https://doi.org/10.1063/1.3174928

2009-01-01

Abstract:A novel weighted density functional theory (WDFT) for an inhomogeneous 12-6 Lennard-Jones fluid is proposed based on the modified fundamental measure theory for repulsive contribution, the mean-field approximation for attractive contribution, and the first-order mean-spherical approximation with a weighted density for correlation contribution. Extensive comparisons of the theoretical results with molecular simulation and experimental data indicate that the new WDFT yields accurate density profiles, adsorption isotherms, fluid-solid interfacial tensions, as well as disjoining potentials and pressures of simple gases such as argon, nitrogen, methane, ethane, and neon confined in slitlike pores or near graphitic solid surfaces. The present WDFT performs better than the nonlocal density functional theory, which is frequently used in the study of adsorption on porous materials. Since the proposed theory possesses a good dimensional crossover and is able to correctly reduce to two-dimensional case, it performs very well even in very narrow pores. In addition, the present WDFT reproduces very well the supercritical fluid-solid interfacial tensions, whereas the theory of Sweatman underestimates them at high bulk densities. The present WDFT predicts that the increase in the fluid-wall attraction may change the sign of the interfacial tension and hence may make the wall from “phobic” to “philic” with respect to the fluid. The new WDFT is computationally as simple and efficient as the mean-field theory and avoids the second-order direct correlation function as an input. It provides a universal way to construct the excess Helmholtz free-energy functional for inhomogeneous fluids such as Yukawa, square-well, and Sutherland fluids.
Interfacial properties of binary mixtures of Lennard-Jones chains in planar interfaces by molecular dynamics simulation

Eder L Granados-Bazán,Sergio E Quiñones-Cisneros,Ulrich K Deiters

DOI: https://doi.org/10.1063/5.0042340

2021-02-28

Abstract:Binary mixtures of fully flexible linear tangent chains composed of bonded Lennard-Jones interaction sites (monomers) were studied using the molecular dynamics simulation in the NVT ensemble. Their interfacial properties were investigated in planar interfaces by direct simulation of an explicit liquid film in equilibrium with its vapor. A method for the calculation of long-range interactions in inhomogeneous fluids was implemented to take into account the potential truncation effects. Surface tension and the pressure tensor were calculated via the classical Irving-Kirkwood method; vapor pressure, orthobaric densities, density profiles, and Gibbs relative adsorption of the volatile component with respect to the heavy component were also obtained. The properties were studied as a function of the temperature, molar concentration of the heavy component, and the asymmetry of the mixture. According to the results of this work, the temperature loses influence on the surface tension, vapor pressure, and Gibbs relative adsorption curves as the molecular length of the heavy component increases. This suggests that the universal behavior observed in pure fluids of Lennard-Jones chains also holds for binary mixtures. The contribution of the long-range interactions turned out to account for about 60%, 20%, and 10% of the surface tension, vapor pressure, and orthobaric density final values, respectively. This contribution was even larger at high temperatures and for large molecules. Strong enrichment of the volatile component at the interface was observed in the asymmetric mixtures. One of these mixtures even showed a barotropic effect at elevated pressures and a class III phase behavior.
Nonlocal density functional theory of water taking into account many-body dipole correlations: Binodal and surface tension of 'liquid-vapour' interface

Yu.A. Budkov,A.L. Kolesnikov

DOI: https://doi.org/10.1088/1361-648X/ab884a

2020-03-27

Abstract:In this paper we formulate a nonlocal density functional theory of inhomogeneous water. We model a water molecule as a couple of oppositely charged sites. The negatively charged sites interact with each other through the Lennard-Jones potential (steric and dispersion interactions), square-well potential (short-range specific interactions due to electron charge transfer), and Coulomb potential, whereas the positively charged sites interact with all types of sites by applying the Coulomb potential only. Taking into account the nonlocal packing effects via the fundamental measure theory (FMT), dispersion and specific interactions in the mean-field approximation, and electrostatic interactions at the many-body level through the random phase approximation, we describe the liquid-vapour interface. We demonstrate that our model without explicit account of the association of water molecules due to hydrogen bonding and with explicit account of the many-body electrostatic interactions at the many-body level is able to describe the liquid-vapour coexistence curve and the surface tension at the ambient pressures and temperatures. We obtain very good agreement with available in the literature MD simulation results for density profile of liquid-vapour interface at ambient state parameters. The formulated theory can be used as a theoretical background for describing of the capillary phenomena, occurring in micro- and mesoporous materials.

Soft Condensed Matter
A Monte Carlo density functional theory for the competition between inter and intramolecular association in inhomogeneous fluids

B. D. Marshall,A. J. Garcia-Cuellar,W. G. Chapman

DOI: https://doi.org/10.1063/1.4807587

2013-08-30

Abstract:A monte carlo density functional theory is developed for chain molecules which both intra and intermolecularly associate. The approach can be applied over a range of chain lengths. The theory is validated for the case of an associating 4-mer fluid in a planar hard slit pore. Once validated the new theory is used to study the effect of chain length and temperature on the competition between intra and intermolecular association near a hard wall. We show that this competition enhances intramolecular association near wall contact and inverts the chain length dependence of the fraction bonded intermolecularly in the inhomogeneous region.

Soft Condensed Matter
Development of Statistical Associating Fluid Theory for Aqueous Ionic Liquid Solutions by Implementing Monte Carlo Simulations and Ornstein-Zernike Integral Equation

Hao Jiang

DOI: https://doi.org/10.48550/arXiv.1705.06973

2017-05-18

Abstract:A recent version of statistical associating fluid theory (SAFT), namely SAFT2, is coupled with the van der Waals and Platteeuw theory to study the alkane hydrate phase equilibrium conditions. The model is found to provide an accurate representation of the alkane hydrate dissociation conditions with and without inhibitors, such as salts, alcohols, as well as mixed salts and alcohol. Based on SAFT2, a heterosegmented SAFT equation of state is developed to model the thermodynamic properties of aqueous ionic liquid (IL) solutions, which is recently discovered as dual function gas hydrate inhibitors. With transferrable model parameters, the heterosegmented SAFT generally well represents the liquid density, activity coefficient, and osmotic coefficient of aqueous imidazolium IL solutions. The inhibition effects of imidazolium IL on methane hydrate is also studied by the heterosegmented SAFT and the van der Waals and Platteeuw theory. The heterosegmented SAFT is then modified to better represent the thermodynamic properties of aqueous IL solutions with the help of Monte Carlo simulation and the solutions of Ornstein-Zernike integral equation. A simple modification of MSA, referred to as KMSA, is proposed to accurately predict the excess energies of electrolyte system in mixture with neutral component. Monte Carlo simulations are also conducted on flexible charged hard-sphere chain molecules, and a SAFT model which implements either a dimer or a dimer-monomer approach to account for the charged chain connectivity is proposed.

Soft Condensed Matter,Chemical Physics
Intrinsic structure of liquid surface and capillary waves on the Density Functional Theory

Ramiro Checa-Garcia

DOI: https://doi.org/10.48550/arXiv.1307.6199

2013-07-04

Abstract:Two different theories are used to understand the liquid-vapor interfaces: the Van der Waals theory and the capillary waves theory. But comparing both come up a problem of interpretation of the interface density profiles obtained, for example, with the Density Functional Theory (DFT). As a consequence emerge the question of how the surface fluctuations are included on traditional density profiles (usually named equilibrium density profiles). Last years, new insights on the role of capillary waves were possible by analyzing X-ray reflectivity experiments and performing computer simulations of liquids with low melting temperature. In particular, the density profile exhibits a layering structure which is considered a key property to elucidate a new interpretation of those profiles as intrinsic density profiles. This dissertation aims to investigate these questions within the DFT using simple fluids with a pairwise interactions that reproduce important phase-diagram properties of liquid metals. Two generics questions were explored: the relevance of Fisher-Widom line and the role of capillary waves on the nature of interface obtained with approximations WDA and FMT. It hypothesized the existence of a density profile with strong layering properties whose structure is reduced by capillary waves. Then the effect of surface fluctuations is described by introducing an effective transversal size which imposes a limitation of the spectrum of surface fluctuations incorporated on the DFT. However, an explicit methodology to unfreeze the capillary waves over a postulated intrinsic profile exempt of surface fluctuations was proven still a challenge. As a consequence it suggested that other previous results describing the liquid surface using the equilibrium DFT may conduct to unphysical properties.

Statistical Mechanics
Interfacial properties of binary azeotropic mixtures of simple fluids: Molecular dynamics simulation and density gradient theory.

J. Staubach,S. Stephan

DOI: https://doi.org/10.1063/5.0100728

2022-09-28

Abstract:Interfacial properties of binary azeotropic mixtures of Lennard-Jones truncated and shifted fluids were studied by molecular dynamics (MD) simulation and density gradient theory (DGT) in combination with an equation of state. Three binary mixtures were investigated, which differ in the energetic cross interaction parameter that yields different types of azeotropic behavior. This study covers a wide temperature and composition range. Mixture A exhibits a heteroazeotrope at low temperatures, which changes to a low-boiling azeotrope at high temperatures, mixture B exhibits a low-boiling azeotrope, and mixture C exhibits a high-boiling azeotrope. The phase behavior and fluid interfacial properties as well as their relation were studied. Vapor-liquid, liquid-liquid, and vapor-liquid-liquid equilibria and interfaces were considered. Density profiles, the surface tension, the interfacial thickness, as well as the relative adsorption and enrichment of the components at the interface were studied. The results obtained from the two independent methods (MD and DGT) are overall in good agreement. The results provide insights into the relation of the phase behavior, particularly the azeotropic behavior, of simple fluid mixtures and the corresponding interfacial properties. Strong enrichment was found for the mixture with a heteroazeotrope in the vicinity of the three-phase equilibrium, which is related to a wetting transition.

Chemistry,Medicine,Materials Science
Simulation of the THF hydrate-water interfacial free energy from computer simulation

Miguel J. Torrejón,Cristóbal Romero-Guzmán,Manuel M. Piñeiro,Felipe J. Blas,Jesús Algaba

DOI: https://doi.org/10.1063/5.0217798

2024-08-24

Abstract:In this work, the tetrahydrofuran (THF) hydrate-water interfacial free energy is determined at $500\,\text{bar}$, at one point of the univariant two-phase coexistence line of the THF hydrate, by molecular dynamics simulation. The Mold Integration-Host methodology, an extension of the original Mold Integration technique to deal with hydrate-fluid interfaces, is used to calculate the interfacial energy. Water is described using the well-known TIP4P/Ice model and THF is described using a rigid version of the TraPPE model. We have recently used the combination of these two models to accurately describe the univariant two-phase dissociation line of the THF hydrate, in a wide range of pressures, from computer simulation [J. Chem. Phys. 160, 164718 (2024)]. The THF hydrate-water interfacial free energy predicted in this work is compared with the only experimental data available in the literature. The value obtained, $27(2)\,\text{mJ/m}^{2}$, is in excellent agreement with the experimental data taken from the literature, $24(8)\,\text{mJ/m}^{2}$. To the best of our knowledge, this is the first time that the THF hydrate-water interfacial free energy is predicted from computer simulation. This work confirms that the Mold Integration technique can be used with confidence to predict solid-fluid interfaces of complex structures, including hydrates that exhibit sI and sII crystallographic structures.

Soft Condensed Matter
Activation of RNA Polymerase III Transcription in Cells Transformed by Simian Virus 40

C. Larminie,J. E. Sutcliffe,K. Tosh,A. Winter,Zoë A. Felton-Edkins,Robert J White

DOI: https://doi.org/10.1128/MCB.19.7.4927

IF: 5.069

1999-07-01

Molecular and Cellular Biology

Abstract:ABSTRACT RNA polymerase (Pol) III transcription is abnormally active in fibroblasts that have been transformed by simian virus 40 (SV40). This report presents evidence that two separate components of the general Pol III transcription apparatus, TFIIIB and TFIIIC2, are deregulated following SV40 transformation. TFIIIC2 subunits are expressed at abnormally high levels in SV40-transformed cells, an effect which is observed at both protein and mRNA levels. In untransformed fibroblasts, TFIIIB is subject to repression through association with the retinoblastoma protein RB. The interaction between RB and TFIIIB is compromised following SV40 transformation. Furthermore, the large T antigen of SV40 is shown to relieve repression by RB. The E7 oncoprotein of human papillomavirus can also activate Pol III transcription, an effect that is dependent on its ability to bind to RB. The data provide evidence that both TFIIIB and TFIIIC2 are targets for activation by DNA tumor viruses.
Development of intermolecular potential models for electrolyte solutions using an electrolyte SAFT-VR Mie equation of state

Daniel K. Eriksen,Georgia Lazarou,Amparo Galindo,George Jackson,Claire S. Adjiman,Andrew J. Haslam

DOI: https://doi.org/10.1080/00268976.2016.1236221

2016-09-16

Molecular Physics

Abstract:We present a theoretical framework and parameterisation of intermolecular potentials for aqueous electrolyte solutions using the statistical associating fluid theory based on the Mie interaction potential (SAFT-VR Mie), coupled with the primitive, non-restricted mean-spherical approximation (MSA) for electrolytes. In common with other SAFT approaches, water is modelled as a spherical molecule with four off-centre association sites to represent the hydrogen-bonding interactions; the repulsive and dispersive interactions between the molecular cores are represented with a potential of the Mie (generalised Lennard-Jones) form. The ionic species are modelled as fully dissociated, and each ion is treated as spherical: Coulombic ion–ion interactions are included at the centre of a Mie core; the ion–water interactions are also modelled with a Mie potential without an explicit treatment of ion–dipole interaction. A Born contribution to the Helmholtz free energy of the system is included to account for the process of charging the ions in the aqueous dielectric medium. The parameterisation of the ion potential models is simplified by representing the ion–ion dispersive interaction energies with a modified version of the London theory for the unlike attractions. By combining the Shannon estimates of the size of the ionic species with the Born cavity size reported by Rashin and Honig, the parameterisation of the model is reduced to the determination of a single ion–solvent attractive interaction parameter. The resulting SAFT-VRE Mie parameter sets allow one to accurately reproduce the densities, vapour pressures, and osmotic coefficients for a broad variety of aqueous electrolyte solutions; the activity coefficients of the ions, which are not used in the parameterisation of the models, are also found to be in good agreement with the experimental data. The models are shown to be reliable beyond the molality range considered during parameter estimation. The inclusion of the Born free-energy contribution, together with appropriate estimates for the size of the ionic cavity, allows for accurate predictions of the Gibbs free energy of solvation of the ionic species considered. The solubility limits are also predicted for a number of salts; in cases where reliable reference data are available the predictions are in good agreement with experiment.

chemistry, physical,physics, atomic, molecular & chemical
Random Surface Statistical Associating Fluid Theory: Adsorption of n-Alkanes on Rough Surface

Timur Aslyamov,Vera Pletneva,Aleksey Khlyupin

DOI: https://doi.org/10.1063/1.5079708

2018-11-01

Abstract:Adsorption properties of chain fluids are of interest from both fundamental and industrial points of view. Density Functional Theory (DFT) based models are among the most appropriate techniques allowing to describe surface phenomena. At the same time Statistical Associating Fluid Theory (SAFT) successfully describes bulk PVT properties of chain-fluids. In this publication we have developed novel version of SAFT-DFT approach entitled RS-SAFT which is capable to describe adsorption of short hydrocarbons on geometrically rough surface. Major advantage of our theory is application to adsorption on natural roughs surfaces with normal and lateral heterogeneity. For this reason we have proposed workflow where surface of real solid sample is analyzed using theoretical approach developed in our previous work [1] and experimentally by means of low temperature adsorption isotherm measurements for simple fluids. As result RS-SAFT can predict adsorption properties of chain fluids taking into account geometry of the surface sample under the consideration. In order to test our workflow we have investigated hexane adsorption on carbon black with initially unknown geometry. Theoretical predictions for hexane adsorption at 303K and 293K fit corresponding experimental data well.

Statistical Mechanics,Soft Condensed Matter
Differential response to 1,3‐bis (2‐chloroethyl)‐1‐nitrosourea in drug‐resistant and ‐sensitive 9L rat brain tumor cells pretreated with α‐difluoromethylornithine and 6‐thioguanine

K. Hunter,D. Deen,L. Marton

DOI: https://doi.org/10.1002/ijc.2910440417

1989-10-15

International Journal of Cancer

Abstract:Pretreatment of 9L cells with either α‐difluoromethylorni‐thine (DFMO), which depletes intracellular levels of poly‐amines, or 6‐thioguanine (6TG), which substitutes for guanine in DNA, potentiates the cytotoxic effects of 1,3‐bis (2‐chloroethyl)‐1‐nitrosourea (BCNU). We examined the effects of these 2 agents in combination on the cytotoxicity of BCNU in sensitive (9L) and resistant (BTRC‐19) rat brain tumor cell lines. 9L cells were incubated with 0.2 μM 6TG for 72 hr; during the last 48 hr, I mM DFMO was added to cell cultures. The cytotoxicity of BCNU in pretreated cells was increased in an additive manner compared with the effects of each agent alone. Results of experiments in which the BCNU‐resistant BTRC‐19 cell line was treated similarly showed that only 6TG enhanced BCNU cytotoxicity. Flow cytometry studies showed that these effects are not related to cell‐cycle processes.
Study on Surface Properties for Non-polar Fluids with Density Functional Theory

W Wu,JF Lu,D Fu,JC Liu,YG Li

2004-01-01

Abstract:The density functional theory, simplified by the local density approximation and mean-field approximation, is applied to study the surface properties of pure non-polar fluids. A reasonable long rang correction is adopted to avoid the truncation of the potential. The perturbation theory is applied to establish the equation for the phase equilibrium, in which the hard-core chain fluid is as the reference fluid and the Yukawa potential is used as the perturbation term. Three parameters, epsilon/k, d and m(s), are regressed from the vapor-liquid equilibria, and the surface properties, including density profile, surface tension and local surface tension profile are predicted with these parameters.
A Density Functional Theory for Lennard-Jones Fluids in Cylindrical Pores and Its Applications to Adsorption of Nitrogen on MCM-41 Materials

Bo Peng,Yang-Xin Yu

DOI: https://doi.org/10.1021/la8024099

IF: 3.9

2008-01-01

Langmuir

Abstract:A density functional theory (DFT) constructed from the modified fundamental-measure theory and the modified Benedict-Webb-Rubin equation of state is presented. The Helmholtz free energy functional due to attractive interaction is expressed as a functional of attractive weighted-density in which the weight function is a mean-field-like type. An obvious advantage of the present theory is that it reproduces accurate bulk properties such as chemical potential, bulk pressure, vapor-liquid interfacial tension, and so forth when compared with molecular simulations and experiments with the same set of molecular parameters. Capabilities of the present DFT are demonstrated by its applicability to adsorption of argon and nitrogen on, respectively, a model cylindrical pore and mesoporous MCM-41 materials. Comparison of the theoretical results of argon in the model cylindrical pore with those from the newly published molecular simulations indicates that the present DFT predicts accurate average densities in the pore, slightly overestimates the pore pressure, and correctly describes the effect of the fluid-pore wall interaction on average densities and pressures in the pore. Application to adsorption of nitrogen on MCM-41 at 77.4 K shows that the present DFT predicts density profiles and adsorption isotherms in good agreement with those from molecular simulations and experiments. In contrast, the hysteresis loop of adsorption calculated from the mean-field theory shifts toward the low pressure region because a low bulk saturated pressure is produced from the mean-field equation of state. The present DFT offers a good way to describe the adsorption isotherms of porous materials as a function of temperature and pressure.
Revisiting the wetting behavior of solid surfaces by water-like models within a density functional theory

A. Kozina,M. Aguilar,O. Pizio,S. Sokołowski

DOI: https://doi.org/10.5488/cmp.27.13604

2024-03-30

Condensed Matter Physics

Abstract:We perform the analysis of predictions of a classical density functional theory for associating fluids with different association strength concerned with wetting of solid surfaces. The four associating sites water-like models with non-associative square-well attraction parametrized by Clark et al. [Mol. Phys., 2006, 104, 3561] are considered. The fluid-solid potential is assumed to have a 10-4-3 functional form. The growth of water film on the substrate upon changing the chemical potential is described. The wetting and prewetting critical temperatures, as well as the prewetting phase diagram are evaluated for different fluid-solid attraction strength from the analysis of the adsorption isotherms. Moreover, the temperature dependence of the contact angle is obtained from the Young equation. It yields estimates for the wetting temperature as well. Theoretical findings are compared with experimental results and in a few cases with data from computer simulations. The theory is successful and quite accurate in describing the wetting temperature and contact angle changes with temperature for different values of fluid-substrate attraction. Moreover, the method provides an easy tool to study other associating fluids on solids of importance for chemical engineering, in comparison with laboratory experiments and computer simulations.

physics, condensed matter

Programmed autophagy in the Drosophila fat body is induced by ecdysone through regulation of the PI3K pathway.

A molecular density functional theory for associating fluids in 3D geometries

Beyond the mean-field approximation for pair correlations in classical density functional theory: Reference inhomogeneous non-associating monomeric fluids for use with SAFT-VR Mie DFT

Density Functional Theory for Inhomogeneous Mixtures of Polymeric Fluids

A Density Functional Theory with a Mean-Field Weight Function: Applications to Surface Tension, Adsorption, and Phase Transition of a Lennard-Jones Fluid in a Slit-Like Pore.

Prediction of interfacial structure and tension of binary mixtures containing carbon dioxide

A Novel Weighted Density Functional Theory for Adsorption, Fluid-Solid Interfacial Tension, and Disjoining Properties of Simple Liquid Films on Planar Solid Surfaces

Interfacial properties of binary mixtures of Lennard-Jones chains in planar interfaces by molecular dynamics simulation

Nonlocal density functional theory of water taking into account many-body dipole correlations: Binodal and surface tension of 'liquid-vapour' interface

A Monte Carlo density functional theory for the competition between inter and intramolecular association in inhomogeneous fluids

Development of Statistical Associating Fluid Theory for Aqueous Ionic Liquid Solutions by Implementing Monte Carlo Simulations and Ornstein-Zernike Integral Equation

Intrinsic structure of liquid surface and capillary waves on the Density Functional Theory

Interfacial properties of binary azeotropic mixtures of simple fluids: Molecular dynamics simulation and density gradient theory.

Simulation of the THF hydrate-water interfacial free energy from computer simulation

Activation of RNA Polymerase III Transcription in Cells Transformed by Simian Virus 40

Development of intermolecular potential models for electrolyte solutions using an electrolyte SAFT-VR Mie equation of state

Random Surface Statistical Associating Fluid Theory: Adsorption of n-Alkanes on Rough Surface

Differential response to 1,3‐bis (2‐chloroethyl)‐1‐nitrosourea in drug‐resistant and ‐sensitive 9L rat brain tumor cells pretreated with α‐difluoromethylornithine and 6‐thioguanine

Study on Surface Properties for Non-polar Fluids with Density Functional Theory

A Density Functional Theory for Lennard-Jones Fluids in Cylindrical Pores and Its Applications to Adsorption of Nitrogen on MCM-41 Materials

Revisiting the wetting behavior of solid surfaces by water-like models within a density functional theory