[Perspectives offered by renal homotransplantation between unrelated individuals. Apropos of 21 transplantations of which 13 were with kidney taken from cadavers].

R. Küss,M. Legrain,R. Nedey,M. Camey,J. Poisson

1967-01-14

Abstract:

What problem does this paper attempt to address?

Micro-electrode cell-based biosensor using electrochemical impedance spectroscopy for cancer research

Qingjun Lìu,Jinjiang Yu,Hui Yu,Lidan Xiao,Pinǵ Wang,Mo Yang

DOI: https://doi.org/10.1007/978-3-540-79039-6_78

2008-01-01

Abstract:In this study, cell biosensor chip with micro-electrode arrays was used to monitor the culture behaviour of mammalian cancer cells and evaluate the chemosensitivity of anti-cancer drugs using electrochemical impedance spectroscopy. The electrode arrays were fabricated by semiconductor technology with diameter from 50 pm to 10 pm of each electrode. The human oesophageal cancer cell lines (KYSE 30) were cultured on the surface of the electrode with the help of fibronectin. Morphology changes of cells adhesion, spreading, and proliferation can be detected by impedimetric analysis in a real time and non-invasive way. Anti-caner drug of cisplatin was added to cells for potential drug screening applications. The experimental results show that drug's chemosensitivity effects can be detected by this cell based biosensor.
An Electrochemical Biosensor Based on Electroactive Peptide Nanoprobes for the Sensitive Analysis of Tumor Cells.

Yujing Zeng,Xinyu Qu,Beibei Nie,Zheying Mu,Chao Li,Genxi Li

DOI: https://doi.org/10.1016/j.bios.2022.114564

2022-01-01

Abstract:Peptides possess many appealing and desirable features, which have attracted increasing attention in the field of electrochemical biosensing. However, peptides hardly produce noticeable electronic signals in response to target binding events. In this work, amphipathic peptides FFFGGGGRGDS with both target recognition and self-assembly capabilities are designed to be co-assembled with the electroactive species ferrocenecarboxylic acid (FcCOOH). Furthermore, the resultant electroactive peptide nanoprobes (ePNPs) are applied for sensitive electrochemical analysis of tumor cells. Specifically, tumor cells are captured by the electrode modified with the corresponding DNA aptamers, and ePNPs can then selectively bind to integrin proteins on the cell surface, thereby accompanied by a remarkable increase of electrochemical signal. Taking the assay of MDA-MB-231 cells, the fabricated biosensor can detect cancer cells with a detection limit of 7 cells mL(-1). Moreover, the ePNPs can act as a universal probe for the detection of different cell lines. Given the merits of easy synthesis, convenient operation, and favorable analytical performance, the proposed biosensor exhibits great potential in developing peptide-based electrochemical biosensing for clinical applications.
Sensitive electrochemiluminescence biosensor based on Au-ITO hybrid bipolar electrode amplification system for cell surface protein detection.

Mei-Sheng Wu,Da-Jing Yuan,Jing-Juan Xu,Hong-Yuan Chen

DOI: https://doi.org/10.1021/ac402889z

IF: 7.4

2013-01-01

Analytical Chemistry

Abstract:Here we developed a novel hybrid bipolar electrode (BPE)-electrochemiluminescence (ECL) biosensor based on hybrid bipolar electrode (BPE) for the measurement of cancer cell surface protein using ferrocence (Fc) labeled aptamer as signal recognition and amplification probe. According to the electric neutrality of BPE, the cathode of U-shaped ITO BPE was electrochemically deposited by Au nanoparticles (NPs) to enhance its conductivity and surface area, decrease the overpotential of O-2 reduction, which would correspondingly increase the oxidation current of Ru(bpy)(3)(2+)/tripropylamine (TPA) on the anode of BPE and resulting a similar to 4-fold enhancement of ECL intensity. Then a signal amplification strategy was designed by introducing Fc modified aptamer on the anode surface of BPE through hybridization for detecting the amount of mucin-1 on MCF-7 cells. The presence of Fc could not only inhibit the oxidation of Ru(bpy)(3)(2+) because of its lower oxidation potential, its oxidation product Fc(+) could also quench the ECL of Ru(bpy)(3)(2+)/TPA by efficient energy-transfer from the excited-state Ru(bpy)(3)(2+)* to Fc(+), making the ECL intensity greatly quenched. On the basis of the cathodic Au NPs induced ECL enhancing coupled with anodic Fc induced signal quenching amplification, the approach allowed detection of mucin-1 aptamer at a concentration down to 0.5 fM and was capable of detecting a minimum of 20 MCF-7 cells. Besides, the amount of mucin-1 on MCF-7 cells was calculated to be 9041 +/- 388 molecules/cell. This approach therefore shows great promise in bioanalysis.
Phospholipid Bilayer Integrated with Multifunctional Peptide for Ultralow-Fouling Electrochemical Detection of HER2 in Human Serum

Yang Li,Rui Han,Jiahui Feng,Jialu Li,Xiliang Luo

DOI: https://doi.org/10.1021/acs.analchem.3c04701

IF: 7.4

2023-12-21

Analytical Chemistry

Abstract:Electrochemical biosensing devices face challenges of severe nonspecific adsorption in complex biological matrices for the detection of biomarkers, and thus, there is a significant need for sensitive and antifouling biosensors. Herein, a sensitive electrochemical biosensor with antifouling and antiprotease hydrolysis ability was constructed for the detection of human epidermal growth factor receptor 2 (HER2) by integrating multifunctional branched peptides with...

chemistry, analytical
Novel Cells-Based Electrochemical Sensor for Investigating the Interactions of Cancer Cells with Molecules and Screening Multitarget Anticancer Drugs.

Cong Li,Yinzhu Cui,Jinyu Ren,Juncheng Zou,Wen Kuang,Xiaozhi Sun,Xin Hu,Youqi Yan,Xiaomei Ling

DOI: https://doi.org/10.1021/acs.analchem.0c03566

IF: 7.4

2020-01-01

Analytical Chemistry

Abstract:A novel, effective, and label-free electrochemical sensor was constructed for investigating the interactions between cancer cells and molecules, based on targeted cancer cells immobilized on a bilayer architecture of N-doped graphene-Pt nanoparticles-chitosan (NGR-Pt-CS) and polyaniline (PANI). The interactions between folic acid (FA, positive control) and dimethyl sulfoxide (DMSO, negative control) and the choice of targeted cells, HepG2 and A549 cells, were investigated by measuring the current change of the sensor to [Fe(CN)6]3-/4- before and after interactions, and the binding constants were calculated to be 1.37 × 105 and 1.92 × 105 M-1 by sensing kinetics. Furthermore, 18 main components from Aidi injection (ADI) were studied to screen compounds that have interactions with different targeted cancer cells including HepG2 and A549 cells. The potential target groups of the interactions between screened active compounds and targeted cancer cells were analyzed through computer-aided molecular docking. In this sensing system, molecules did not require electrochemical activity, and different targeted cancer cells could be immobilized on the modified electrode surface, truly reflecting the categories and numbers of targets. Additionally, the proposed sensor specifically circumvented the current paradigm in most cells-based electrochemical sensors for screening drugs, in which the changes in cell behavior induced by drugs are monitored. This study provided a novel, simple, and generally applicable method for exploring the interaction of molecules with cancer cells and screening multitarget drugs.
Design of U-shaped peptides with long-lasting antifouling efficacy: Toward a feasible electrochemical aptasensor for robust detection in human serum

Yanxin Li,Zhen Wei,Shuyue Guo,Yinan Zhan,Gao-Chao Fan,Xiliang Luo

DOI: https://doi.org/10.1016/j.aca.2024.342953

2024-08-22

Abstract:Background: Developing biosensors with antifouling properties is essential for accurately detecting low-concentration biomarkers in complex biological matrix, which is imperative for effective disease diagnosis and treatment. Herein, an antifouling electrochemical aptasensor qualifying for probing targets in human serum was explored based on newly-devised peptides that could form inverted U-shaped structures with long-term stability. Results: The inverted U-shaped peptides (U-Pep) with two terminals of thiol groups grafted onto the Au-modified electrode showcase superior antifouling properties in terms of high stability against enzymatic hydrolysis and long acting against biofouling in actual biofluids. The construction of the outlined antifouling electrochemical aptasensor just involved the fabrication of Au-deposited poly(3,4 ethylenedioxythiophene) (Au/PEDOT) modified electrode, followed by one-step co-incubation in the peptides and the aptamer probes with the Au/PEDOT electrode. Taking a typical biomarker of alpha-fetoprotein (AFP) for detection, this elegant antifouling aptasenor demonstrated a nice response for probing the target AFP with a low detection limit of 0.27 pg/mL and a wide linear scope of 1.0 pg/mL to 1.0 μg/mL, and furthermore qualified for assaying of AFP in human serum samples with satisfactory accuracy and feasibility. Significance: This engineering strategy of U-Pep with long-lasting antifouling efficacy opens a new horizon for high-performance antifouling biosensors suitable for detection in complex bifluids, and it could spark more inspiration for a follow-up exploration of other featured antifouling biomaterials.
Novel 2D CuFe-MOF-based immunoprobe: Addressing antifouling electrochemical immunosensing inadequate sensitivity challenge

Xianrui Jiang,Tao Yao,Shuqin Wang,Hongliang Han,Zhanfang Ma,Haijun Yang

DOI: https://doi.org/10.1016/j.snb.2024.135410

IF: 9.221

2024-02-02

Sensors and Actuators B Chemical

Abstract:Rational design of antifouling interfaces in electrochemical immunosensor was an efficient approach to resist nonspecific adsorption in complex sample. Nonetheless, it remained a challenge, namely, most antifouling materials had poor electrical conductivity and their introduction resulted in high impedance at the sensing interface, greatly reducing the sensitivity of the detection. Herein, a novel immunoprobe was fabricated by utilizing 2D CuFe-MOF composed by Cu and Fe as metal nodes and 1,4-benzenedicarboxylic acid (H 2 BDC) as an organic ligand. Due to the planar conjugated structure of the ligand, electronic transition can be greatly promoted. This property of the ligand was applied to improve the conductivity of the antifouling sensing interface. Therefore, the sensitivity of the sensor was greatly enhanced. Because of the synergistic catalysis of Fe-Cu bimetallic sites, in presence of H 2 O 2 , abundant hydroxyl radicals were generated for further cascade amplification of electrochemical signals. The hyaluronic acid (HA) and 5-serotonin hydrochloride (ST) were cross-linked on electrode to form a hydrogel substrate to resist fouling from serum sample. Given the integration of the novel probe and the antifouling substrate, the method achieved remarkably low limit of detection (2.6 fg mL −1 ) for squamous cell carcinoma antigen (SCCA) in human serum samples over a wide linear range from 100 fg mL −1 to 100 ng mL −1 . The method provided a pervasive route for designing sensitive antifouling interfaces.

chemistry, analytical,electrochemistry,instruments & instrumentation
An electrochemical biosensor for HER2 detection in complex biological media based on two antifouling materials of designed recognizing peptide and PEG

Xiqin Yang,Ping Chen,Xi Zhang,Hao Zhou,Zhen Song,Wenlong Yang,Xiliang Luo

DOI: https://doi.org/10.1016/j.aca.2023.341075

2023-04-29

Abstract:A simple tactic for electrochemical determination of a typical biomarker for breast cancer, human epidermal growth factor receptor 2 (HER2), was presented via the construction of a low fouling sensing interface functionalized with polyethylene glycol (PEG) and peptide. The HER2 biosensor was developed based on an electrode modified by the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) and Au nanoparticles (AuNPs) as the sensing substrate, and followed by the immobilization of an antifouling PEG and a peptide with both recognizing and antifouling properties. Thanks to the combined antifouling effect of the PEG and peptide, and the specific recognizing ability of the peptide to the target HER2, the developed electrochemical biosensor exhibited strong antifouling performances in complex biofluids, such as human blood and serum, and it was capable of assaying target HER2 within a very wide linear range (1.0 pg mL-1 to 1.0 μg mL-1), with an ultralow limit of detection (0.44 pg mL-1). The combination of two kinds of antifouling biomaterials (PEG and peptide) offered an effective strategy for the development of low fouling sensing platforms suitable for practical assay in complex biotic environments.
Versatile Aptasensor for Electrochemical Quantification of Cell Surface Glycan and Naked-Eye Tracking Glycolytic Inhibition in Living Cells.

Jing-Jing Zhang,Fang-Fang Cheng,Ting-Ting Zheng,Jun-Jie Zhu

DOI: https://doi.org/10.1016/j.bios.2016.09.087

IF: 12.545

2016-01-01

Biosensors and Bioelectronics

Abstract:Quantifying the glycan expression status on cell surfaces is of vital importance for insight into the glycan function in biological processes and related diseases. Here we developed a versatile aptasensor for electrochemical quantification of cell surface glycan by taking advantage of the cell-specific aptamer, and the lectin-functionalized gold nanoparticles acting as both a glycan recognition unit and a signal amplification probe. To construct the aptasensor, amine-functionalized mucin 1 protein (MUC1) aptamer was first covalently conjugated to carboxylated-magnetic beads (MBs) using the succinimide coupling (EDC-NHS) method. On the basis of the specific recognition between aptamer and MUC1 protein that overexpressed on the surface of MCF-7 cells, the aptamer conjugated MBs showed a predominant capability for cell capture with high selectivity. Moreover, a lectin-based nanoprobe was designed by noncovalent assembly of concanavalin A (ConA) on gold nanoparticles (AuNPs). This nanoprobe incorporated the abilities of both the specific carbohydrate recognition and the signal amplification based on the gold-promoted reduction of silver ions. By coupling with electrochemical stripping analysis, the proposed sandwich-type cytosensor showed an excellent analytical performance for the ultrasensitive detection of MCF-7 cells and quantification of cell surface glycan. More importantly, taking advantage of Con A-gold nanoprobe catalyzed silver enhancement, the proposed method was further used for naked-eye tracking glycolytic inhibition in living cells. This aptasensor holds great promise as a new point-of-care diagnostic tool for analyzing glycan expression on living cells and further helps cancer diagnosis and treatment.
A Novel Aptasensor Based on Muc-1 Conjugated Cnss for Ultrasensitive Detection of Tumor Cells

Hongmei Cao,Daixin Ye,Qianqian Zhao,Juan Luo,Song Zhang,Jilie Kong

DOI: https://doi.org/10.1039/c4an00844h

2014-01-01

Abstract:A novel strategy for the quantitative determination of human colon cancer DLD-1 cells utilizing an electrochemical aptasensor was developed by effective surface recognition between Mucin 1 glycoprotein over-expressed on the cell membrane and MUC-1 aptamer (MUC-1) bound on carbon nanospheres (CNSs). An MTT assay revealed that the as-prepared CNSs by green route exhibited satisfactory biocompatibility for cell viability, providing a suitable platform for the cell adhesion study. Furthermore, using CNSs as a sensing layer accelerated electron transfer and provided a highly stable matrix for the convenient conjugation of target MUC-1 aptamer, considerably amplifying the electrochemical signals. Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) were applied to assess the optimal conditions and detection performance of the as-fabricated aptasensor. The attachment of colon cancer DLD-1 cells onto the MUC-1 aptamer immobilized CNSs led to increased EIS responses, which changed linearly in cell concentration ranging from 1.25 × 10(2) to 1.25 × 10(6) cells per mL with a lower detection limit of 40 cells per mL. With this method, colon cancer DLD-1 cells can be easily distinguished from normal cells, Human astrocytes 1800. The novel aptasensor revealed high specificity to DLD-1 cells. Furthermore, the aptasensor described here showed good reproducibility and high stability because of the CNSs of high stability and biocompatibility. The proposed protocols are a promising technique for the early monitoring of human colon cancer, and might have potential clinical applications such as cancer diagnosis, drug screening.
A photoelectrochemical aptasensor based on double Z-scheme α-Fe2O3/MoS2/Bi2S3 ternary heterojunction for sensitive detection of circulating tumor cells

Kai Feng,Ya Di,Meng Han,Weitao Yan,Yulin Guo,Xiangqian Huai,Yimin Wang

DOI: https://doi.org/10.3389/fbioe.2024.1372688

IF: 5.7

2024-03-08

Frontiers in Bioengineering and Biotechnology

Abstract:A novel photoelectrochemical (PEC) aptasensor based on a dual Z-scheme α-Fe 2 O 3 /MoS 2 /Bi 2 S 3 ternary heterojunction for the ultrasensitive detection of circulating tumor cells (CTCs) was developed. The α-Fe 2 O 3 /MoS 2 /Bi 2 S 3 nanocomposite was prepared via a step-by-step route, and the photoproduced electron/hole transfer path was speculated by conducting trapping experiments of reactive species. α-Fe 2 O 3 /MoS 2 /Bi 2 S 3 -modified electrodes exhibited greatly enhanced photocurrent under visible light due to the double Z-scheme charge transfer process, which met the requirement of the PEC sensor for detecting larger targets. After the aptamer was conjugated on the photoelectrode through chitosan (CS) and glutaraldehyde (GA), when MCF-7 cells were presented and captured, the photocurrent of the PEC biosensing system decreased due to steric hindrance. The current intensity had a linear relationship with the logarithm of MCF-7 cell concentration ranging from 10 to 1×10 5 cells mL −1 , with a low detection limit of 3 cell mL −1 (S/N = 3). The dual Z-scheme α-Fe 2 O 3 /MoS 2 /Bi 2 S 3 ternary heterojunction-modified PEC aptasensor exhibited high sensitivity and excellent specificity and stability. Additionally, MCF-7 cells in human serum were determined by this PEC aptasensor, exhibiting great potential as a promising tool for clinical detection.

multidisciplinary sciences
Protein-inorganic hybrid nanoflowers as ultrasensitive electrochemical cytosensing interfaces for evaluation of cell surface sialic acid.

Hongmei Cao,Da-Peng Yang,Daixin Ye,Xianxia Zhang,Xueen Fang,Song Zhang,Baohong Liu,Jilie Kong

DOI: https://doi.org/10.1016/j.bios.2015.01.003

IF: 12.545

2015-01-01

Biosensors and Bioelectronics

Abstract:The identification of biocompatible nanomaterials with high conductivities as sensing interfaces is important in developing novel electrochemical cytosensors. We prepared a novel protein-inorganic nanomaterial-bovine serum albumin (BSA) incorporated Ag nanoflowers with three-dimensional porous architectures, using a simple biomimetic method. The BSA-incorporated Ag nanoflowers were modified on a glassy carbon electrode (GCE) surface and conjugated with a targeting lectin molecule, i.e., Sambucus nigra agglutinin (SNA), for sensing DLD-1 human colon cancer cells. The BSA-incorporated Ag nanoflowers were a suitable platform, and showed improved cell-immobilization capacity, and good biocompatibility, with retention of activity of the immobilized cells. These properties are attributed to the large surface area of the porous structure and the natural BSA layer acting as a biocompatible support. The attachment of DLD-1 cells to the GCE increased the electron-transfer resistance, with a good correlation with the logarithm of the concentration from 1.35×102 to 1.35×107cellsmL−1, with a low detection limit of 40cellsmL−1. Based on the affinity between SNA and sialic acid (SA), the UV–vis absorption spectrum of the one-step reaction between SA and acidic ninhydrin indicated that the average number of SA molecules on a single living DLD-1 cell surface was approximately 2.16×1012. This proposed cytosensing strategy had good reproducibility, acceptable precision, and high specificity for SA-over-expressed cells, indicating that it has potential applications for the early monitoring of tumor cells and convenient evaluation of SA on living cells.
Aptamer-functionalized quasi-ZIF-67@methylene blue hybrid nanoprobes for the electrochemical aptasensing of epithelial cancer biomarkers

Ying Ma,Xianhua Shi,Yi Ding,Xiaohui Zhang,Jing Lu,Duanping Sun

DOI: https://doi.org/10.1016/j.cej.2024.149362

IF: 15.1

2024-03-01

Chemical Engineering Journal

Abstract:The cell surface protein epithelial cell adhesion molecule (EpCAM) has oncogenic effects, and its overexpression is strongly correlated with tumor development. Here, an electrochemical method is proposed to detect and identify EpCAM at the level of purified proteins and living cells. The core concept of this method is the use of DNA nanotetrahedron (NTH)-based capture probes and aptamer-modified quasi-ZIF-67@Au@methylene blue (QZIF-67@Au@MB@APT) as signal probes. In our design, NTH-assisted targeted immobilization can greatly improve the accessibility of nucleotide-containing artificial aptamers to suspended targets and the specificity of the target EpCAM. Moreover, following partial deligandization, ZIF-67 was converted to QZIF-67 with an extensively improved porous structure that significantly enhanced the loading efficiency of signaling molecules and thus led to a remarkable increase in detection sensitivity. QZIF-67@Au@MB can be integrated with an aptamer to act as a signal reporter with an electrochemical sensing platform for EpCAM detection. By tracing the electrochemical signals from the QZIF-67@Au@MB@APT, the method demonstrated the detection of targets as low as 3 pg/mL within a wide linear range from 0.005 to 100 ng/mL. We have successfully applied this aptasensor for in situ characterization of EpCAM on the cellular surface and monitoring alterations in EpCAM expression during drug treatment, which provides a low-cost but robust alternative to highly expensive and experience-dependent flow cytometry. Overall, electrochemical characterization may provide promising technical support for the precise management of tumors.

engineering, chemical, environmental
Multienzyme decorated polysaccharide amplified electrogenerated chemiluminescence biosensor for cytosensing and cell surface carbohydrate profiling.

Ling Zhang,Yangzhong Wang,Qianqian Tian,Yang Liu,Jinghong Li

DOI: https://doi.org/10.1016/j.bios.2016.10.040

IF: 12.545

2017-01-01

Biosensors and Bioelectronics

Abstract:A novel ECL biosensor for cytosensing and cell surface carbohydrate expression evaluation was developed, by the integration of the peptide modified interface for highly specific carbohydrate recognition and sodium alginate loaded glucose oxidase as the signal probe with high signal amplification efficiency. A cysteine-terminated peptide self-assembled on the electrode through Au–S bond to construct a functional interface for cell capture, with decent biocompatibility and high affinity for the human breast cancer cell MCF-7. Concanavalin A lectin modified gold nanoparticles specifically recognized the cell surface carbohydrates and were absorbed on the electrode, followed by the immobilization of multiple glucose oxidase conjugated sodium alginate, which could remarkably increase the sensitivity of the biosensor with enhanced catalysis. The as-proposed ECL cytosensor was successfully applied for the detection of the MCF-7 tumor cells, whose glycans on the cell membranes are over-expressed. A low detection limit of 150cellsmL−1 was obtained, with a wide dynamic linear range from 5.0×102 to 5.0×105cellsmL−1. Due to the excellent sensitivity, stability and biocompatibility, the ECL biosensor would be promising in reliable diagnostics of glycan relevant biomarkers for cancer and other diseases.
Universal nanocomposite coating with antifouling and redox capabilities for electrochemical affinity biosensing in complex biological fluids

Aditya Manu Bharti,R. K. Rakesh Kumar,Cheng-Hsin Chuang,Muhammad Omar Shaikh

DOI: https://doi.org/10.1039/d3nh00541k

2024-03-08

Nanoscale Horizons

Abstract:Electrochemical affinity biosensors have the potential to facilitate the development of multiplexed point-of-care diagnostics in complex biological fluids. However, their commercial viability has been hindered by challenges such as electrode biofouling and the lack of inherent redox properties. To address this unmet need, we have developed a universal nanocomposite coating which is unique in its ability to not only allow oriented conjugation of the biorecognition element but also specific detection directly in complex biological fluids like serum and urine owing to its built-in antifouling and redox capabilities, thus improving suitability for point of care testing. This multifunctional coating comprises of a 3D porous crosslinked bovine serum albumin matrix for oriented conjugation and antifouling properties with embedded graphene nanosheets modified with amino-ferrocene for enhanced conductivity and mediator-free biosensing. The coating showed minimal signal degradation despite prolonged exposure to 1% bovine serum albumin, artificial urine and untreated human serum for up to 30 days. To demonstrate its utility, we fabricated and tested proof-of-concept electrochemical immunosensors for bladder cancer protein biomarkers, specifically Interleukin-8 (IL-8) and Vascular Endothelial Growth Factor (VEGF). The practical feasibility was highlighted by the excellent sensitivity and specificity observed for IL-8 and VEGF with a limit of detection of 41 pg/mL and 67 pg/mL, respectively. Consequently, this universal nanocomposite-based electrochemical biosensing platform can be extended to the point of care testing of a broad spectrum of biomarkers present in complex biological fluids, thus enabling reliable and early diagnostics.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
A Label-Free Electrochemical Impedance Cytosensor Based on Specific Peptide-Fused Phage Selected from Landscape Phage Library

Lei Han,Pei Liu,Valery A. Petrenko,Aihua Liu

DOI: https://doi.org/10.1038/srep22199

IF: 4.6

2016-02-24

Scientific Reports

Abstract:Abstract One of the major challenges in the design of biosensors for cancer diagnosis is to introduce a low-cost and selective probe that can recognize cancer cells. In this paper, we combined the phage display technology and electrochemical impedance spectroscopy (EIS) to develop a label-free cytosensor for the detection of cancer cells, without complicated purification of recognition elements. Fabrication steps of the cytosensing interface were monitored by EIS. Due to the high specificity of the displayed octapeptides and avidity effect of their multicopy display on the phage scaffold, good biocompatibility of recombinant phage, the fibrous nanostructure of phage and the inherent merits of EIS technology, the proposed cytosensor demonstrated a wide linear range (2.0 × 10 2 − 2.0 × 10 8 cells mL −1 ), a low limit of detection (79 cells mL −1 , S/N = 3), high specificity, good inter-and intra-assay reproducibility and satisfactory storage stability. This novel cytosensor designing strategy will open a new prospect for rapid and label-free electrochemical platform for tumor diagnosis.

multidisciplinary sciences
Low fouling electrochemical biosensors based on designed Y-shaped peptides with antifouling and recognizing branches for the detection of IgG in human serum

Min Chen,Zhen Song,Rui Han,Yang Li,Xiliang Luo

DOI: https://doi.org/10.1016/j.bios.2021.113016

IF: 12.545

2021-04-01

Biosensors and Bioelectronics

Abstract:The nonspecific adsorption and accumulation of biomolecules on electrode interfaces remains a challenge for sensitive and accurate detection of disease markers in complex biological media, and it is highly desired to develop antifouling biosensors capable of assaying targets in complicated real liquids. Herein, an efficient and simple antifouling biosensor was constructed based on a self-designed Y-shaped peptide. The Y-shaped peptide was designed with two branches: one branch with the peptide sequence of EKEKEKE for antifouling, and the other branch with the peptide sequence of HWRGWVA for recognizing of human IgG. Under optimized experimental conditions, electrodes modified with Y-shaped peptides exhibited excellent antifouling and electrochemical sensing performances. The developed biosensor was able to effectively resist biofouling in various protein solutions and even serum samples, and the linear range of the biosensor for human IgG detection was from 100 pg·mL-1 to 10 μg·mL-1, with a relatively low limit of detection of 32 pg·mL-1 (S/N = 3). The antifouling biosensor possesses the capability of assaying human IgG in real serum samples, and this strategy of developing low fouling biosensors based on Y-shaped peptides can be readily expanded to the construction of other biosensing systems for different targets.

biotechnology & applied microbiology,biophysics,chemistry, analytical,electrochemistry,nanoscience & nanotechnology
Sphere‐on‐Tube Biomimetic Hierarchical Nanostructures Coupled with Engineered Surfaces for Enhanced Photoelectrochemical Biosensing of Cancer Cells Expressing Folate Receptors

Ning Gao,Xueying Wang,Jinhui Feng,Xiaojian Li,Huan Wang,Dawei Fan,Yong Zhang,Hongmin Ma,Qin Wei,Huangxian Ju

DOI: https://doi.org/10.1002/admi.202100421

IF: 5.4

2021-01-01

Advanced Materials Interfaces

Abstract:The quantitative detection of cancer cells and the evaluation of folate receptor (FR) expression on cell membranes are of great significance for tumor-related research. In this work, a photoelectrochemical (PLC) biosensing interface is proposed for detection of cancer cells based on the construction of nano-structured platforms coupled with surface engineering. A "sphere-on-tube" hierarchical nanostructure is fabricated by depositing biomimetic polydopamine nanospheres on TiO2 nanotube arrays. Enhanced PEC responses are achieved with the formation of polyethylene glycol antifouling layers and the immobilization of folic acid as a recognition ligand. Based on the ligand- receptor interaction, the antifouling PEC biosensor exhibits a wide linear range for the detection of the breast cancer cell line MDA-MB-231 from 20 to 2.0 x 10(6) cells mL(-1) with a low detection limit of 15 cells mL(-1) (S/N = 3). The expressing differentiation of FR on several cancer cells is well discriminated. The proposed PEC cytosensing method shows great potential in detection of cancer cells expressing folate receptors.
Porous organic polymers assisted aptamer signal amplification for enhanced photoeletrochemical detection of MUC1

Jiayi Zhao,Luqing Chen,Fanglei Liu,Yan Liu,Jianing Ji,Guojian Chen,Guohai Yang,Xiaochen Dong,Lu-Lu Qu

DOI: https://doi.org/10.1016/j.aca.2024.342762

2024-07-11

Abstract:Mucin1 (MUC1) is an extensively glycosylated transmembrane protein that is widely distributed and overexpressed on the surface of cancer cells, playing an important role in tumor occurrence and metastasis. Therefore, highly sensitive detection of MUC1 is of great significance for early diagnosis, treatment monitoring, and prognosis of cancer. Here, an ultra-sensitive photoelectrochemical (PEC) sensing platform was developed based on an aptamer amplification strategy for highly selective and sensitive detection of MUC1 overexpressed in serum and on cancer cell surfaces. The sensing platform utilized copper phthalocyanine to fabricate porous organic polymers (CuPc POPs), and was effectively integrated with g-C3N4/MXene to form a ternary heterojunction material (g-C3N4/MXene/CuPc POPs). This material effectively improved electron transfer capability, significantly enhanced light utilization, and greatly enhanced photoelectric conversion efficiency, resulting in a dramatic increase in photocurrent response. MUC1 aptamer 1 was immobilized on a chitosan-modified photoelectrode for the selective capture of MUC1 or MCF-7 cancer cells. When the target substance was present, MUC1 aptamer 2 labeled with methylene blue (MB) was specifically adsorbed on the electrode surface, leading to enhanced photocurrent. The concentration of MUC1 directly correlated with the number of MB molecules attracted to the electrode surface, establishing a linear relationship between photocurrent intensity and MUC1 concentration. The PEC biosensor exhibited excellent sensitivity for MUC1 detection with a wide detection range from 1 × 10-7 to 10 ng/mL and a detection limit of 8.1 ag/mL. The detection range for MCF-7 cells was from 2 × 101 to 2 × 106 cells/mL, with the capability for detecting single MCF-7 cells. The aptamer amplification strategy significantly enhanced PEC performance, and open up a promising platform to establish high selectivity, stability, and ultrasensitive analytical techniques.
Biocompatible conductive architecture with surface-confined probe for non-invasive electrochemical cytosensing

yinan qin,jiyang liu,dan li,lei xu,yaqing liu,erkang wang

DOI: https://doi.org/10.1016/j.elecom.2012.02.024

IF: 5.443

2012-01-01

Electrochemistry Communications

Abstract:The possibility of using electrochemical methods to investigate cell immobilization and natural physiological states provides great advances in life science research and public health protection. Herein, cytosensors with surface-confined ferrocene as signal indicator were developed to study the immobilization of human cervical carcinoma (HeLa) cells. With layer-by-layer (LBL) technique positively charged ferrocene functionalized poly(allylamine hydrochloride) (Fc-PAH) and negatively charged single-wall carbon nanotubes (SWNTs) were alternately assembled on 3-mercaptopropionic acid (MPA) modified gold substrates. The as-prepared cytosensors presented good biocompatibility and HeLa cells could keep viability for 72h on the materials according to the proliferation results. With differential pulse voltammetry (DPV) measurements the cytosensors exhibited high sensitivity to the detection of HeLa cells within a wide concentration range from 10 to 107cells/mL.

[Perspectives offered by renal homotransplantation between unrelated individuals. Apropos of 21 transplantations of which 13 were with kidney taken from cadavers].

Micro-electrode cell-based biosensor using electrochemical impedance spectroscopy for cancer research

An Electrochemical Biosensor Based on Electroactive Peptide Nanoprobes for the Sensitive Analysis of Tumor Cells.

Sensitive electrochemiluminescence biosensor based on Au-ITO hybrid bipolar electrode amplification system for cell surface protein detection.

Phospholipid Bilayer Integrated with Multifunctional Peptide for Ultralow-Fouling Electrochemical Detection of HER2 in Human Serum

Novel Cells-Based Electrochemical Sensor for Investigating the Interactions of Cancer Cells with Molecules and Screening Multitarget Anticancer Drugs.

Design of U-shaped peptides with long-lasting antifouling efficacy: Toward a feasible electrochemical aptasensor for robust detection in human serum

Novel 2D CuFe-MOF-based immunoprobe: Addressing antifouling electrochemical immunosensing inadequate sensitivity challenge

An electrochemical biosensor for HER2 detection in complex biological media based on two antifouling materials of designed recognizing peptide and PEG

Versatile Aptasensor for Electrochemical Quantification of Cell Surface Glycan and Naked-Eye Tracking Glycolytic Inhibition in Living Cells.

A Novel Aptasensor Based on Muc-1 Conjugated Cnss for Ultrasensitive Detection of Tumor Cells

A photoelectrochemical aptasensor based on double Z-scheme α-Fe2O3/MoS2/Bi2S3 ternary heterojunction for sensitive detection of circulating tumor cells

Protein-inorganic hybrid nanoflowers as ultrasensitive electrochemical cytosensing interfaces for evaluation of cell surface sialic acid.

Aptamer-functionalized quasi-ZIF-67@methylene blue hybrid nanoprobes for the electrochemical aptasensing of epithelial cancer biomarkers

Multienzyme decorated polysaccharide amplified electrogenerated chemiluminescence biosensor for cytosensing and cell surface carbohydrate profiling.

Universal nanocomposite coating with antifouling and redox capabilities for electrochemical affinity biosensing in complex biological fluids

A Label-Free Electrochemical Impedance Cytosensor Based on Specific Peptide-Fused Phage Selected from Landscape Phage Library

Low fouling electrochemical biosensors based on designed Y-shaped peptides with antifouling and recognizing branches for the detection of IgG in human serum

Sphere‐on‐Tube Biomimetic Hierarchical Nanostructures Coupled with Engineered Surfaces for Enhanced Photoelectrochemical Biosensing of Cancer Cells Expressing Folate Receptors

Porous organic polymers assisted aptamer signal amplification for enhanced photoeletrochemical detection of MUC1

Biocompatible conductive architecture with surface-confined probe for non-invasive electrochemical cytosensing