Abstract:Abstract This study proposes a photonic crystal fiber made of fused silica glass, with the core infiltrated with tetrachloroethylene (C 2 Cl 4 ) as a new source of supercontinuum (SC) spectrum. We studied numerically the guiding properties of the several different fiber structures in terms of characteristic dispersion, mode area, and attenuation of the fundamental mode. Based on the results, the structural geometries of three C 2 Cl 4 -core photonic crystal fibers were optimized in order to support the broadband SC generations. The first fiber structure with lattice constant 1.5 μm and filling factor 0.4 operates in all-normal dispersion. The SC with a broadened spectral bandwidth of 0.8–2 μm is generated by a pump pulse with a central wavelength of 1.56 μm, 90 fs duration and energy of 1.5 nJ. The second proposed structure, with lattice constant 4.0 μm and filling factor 0.45, performs an anomalous dispersion for wavelengths longer than 1.55 μm. With the same pump pulse as the first fiber, we obtained the coherence SC spectrum in an anomalous dispersion range with wavelength range from 1 to 2 μm. Meanwhile, the third selected fiber (lattice constant 1.5 μm, filling factor 0.55) has two zero dispersion wavelengths at 1.04 μm and 1.82 μm. The octave-spanning of the SC spectrum formed in this fiber was achieved in the wavelength range of 0.7–2.4 μm with an input pulse whose optical properties are 1.03 μm wavelength, 120 fs duration and energy of 2 nJ. Those fibers would be good candidates for all-fiber SC sources as cost-effective alternatives to glass core fibers.

Ultrabroadband and coherent mid-infrared supercontinuum generation in Te-based chalcogenide tapered fiber with all-normal dispersion

1.4-7.2 μm broadband supercontinuum generation in an As-S chalcogenide tapered fiber pumped in the normal dispersion regime

1.5-14 μm midinfrared supercontinuum generation in a low-loss Te-based chalcogenide step-index fiber

Mid-infrared supercontinuum generation spanning from 1.9 to 5.7 μm in a chalcogenide fiber taper with ultra-high NA

Simulation and Analysis of Supercontinuum Generation in the Waveband Up to 25 Μm

Mid-infrared flattened supercontinuum generation in all-normal dispersion tellurium chalcogenide fiber

Broadband flat supercontinuum generated by chalcogenide double-clad step-index fiber with special dispersion

Mid-infrared supercontinuum generation in tapered chalcogenide fiber for producing octave-spanning frequency comb around 3 μm

Supercontinuum generation based on nanofiber

Tapered Chalcogenide-Glass Rods for Multi-Octave Mid-Infrared Supercontinuum Generation

Chalcogenide Ge 20 Sb 5 Se 75 photonic crystal fiber with seven air-hole rings for ultraflat mid-infrared supercontinuum generation

Single-mode suspended large-core chalcohalide fiber with a low zero-dispersion wavelength for supercontinuum generation

Nanoimprinting and Tapering of Chalcogenide Photonic Crystal Fibers for Cascaded Supercontinuum Generation

An Efficient Method for Supercontinuum Generation in Dispersion-Tailored Lead-Silicate Fiber Taper

Engineering the high-frequency components of coherent supercontinuum generation in hybrid optical fibers with yttrium aluminum garnet core

1.2-15.2 μm supercontinuum generation in a low-loss chalcohalide fiber pumped at a deep anomalous-dispersion region

Broadband Mid-Infrared Supercontinuum Generation in Dispersion-Engineered As2S3-silica Nanospike Waveguides Pumped by 2.8 Μm Femtosecond Laser

Study of supercontinuum generation in etch-coated tellurium based chalcogenide waveguide

Coherent supercontinuum generation from 1.4 to 4 μm in a tapered fluorotellurite microstructured fiber pumped by a 1980 nm femtosecond fiber laser

Investigation of hybrid chalcogenide photonic crystal fiber for MIR supercontinuum generation and optical communication

Supercontinuum generation in photonic crystal fibers infiltrated with tetrachloroethylene