Abstract:Indium thin oxide (ITO)-free planar perovskite solar cells (PSCs) were fabricated at a low temperature (150 degrees C) in this work based on the transparent electrode of photolithography processed nickel/gold (Ni/Au) mesh and the high conductivity polymer, PH1000. Ultrathin Au was introduced to increase the conductivity of metal mesh, and the optimal hexagonal Ni (30 nm)/Au (10 nm) mesh (line width of 5 mu m) shows a transmittance close to 80% in the visible light region and a sheet resistance lower than 16.9 Omega/sq. The conductive polymer PH1000 not only smooths the raised surface of the metal mesh but also enhances the charge collection ability of metal mesh. The fabricated PSCs have the typical planar structure (glass/Ni-Au mesh/PH1000/PEDOT:PSS/MA(y)FA(1-y)PbI(x)Cl(3-x)/PCBM/BCP/Ag) and the champion PSC (0.09 cm(2)) obtains a power conversion efficiency (PCE) of 13.88%, negligible current hysteresis, steady current density and PCE outputs, and good process repeatability. Its photovoltaic performance and stability are comparable to the reference PSC based on the ITO electrodes (PCE = 15.70%), which demonstrates that the Ni/Au mesh transparent electrodes are a promising ITO alternative to fabricate efficient PSCs. The relatively lower performance of Ni/Au based PSC results from the relatively slower charge extraction and stronger charge recombination than the ITO based PSC. Further, we tried to fabricate the large area (1 cm(2)) device and achieve a PCE over 6% with negligible hysteresis and steady current density and PCE outputs. The improvements of perovskite film quality and interface modification should be an effective approach to further enhance the device performance of Ni/Au based PSCs, and the Ni/Au mesh electrode may find wider applications in PSCs and flexible devices.

Fabrication of Nickel Oxide Nanopillar Arrays on Flexible Electrodes for Highly Efficient Perovskite Solar Cells

Fabrication of Nickel Oxide Nanopillar Arrays on Flexible Electrodes for High-Efficient Perovskite Solar Cells.

A Mechanically Robust Conducting Polymer Network Electrode for Efficient Flexible Perovskite Solar Cells

Room-Temperature and Solution-Processable Cu-Doped Nickel Oxide Nanoparticles for Efficient Hole-Transport Layers of Flexible Large-Area Perovskite Solar Cells

Efficient Ni/Au Mesh Transparent Electrodes for ITO-Free Planar Perovskite Solar Cells.

Low-Temperature-Deposited TiO2 Nanopillars for Efficient and Flexible Perovskite Solar Cells

Printable and Homogeneous NiOx Hole Transport Layers Prepared by a Polymer‐Network Gel Method for Large‐Area and Flexible Perovskite Solar Cells

Three-Dimensional Nanopillar Arrays-Based Efficient and Flexible Perovskite Solar Cells with Enhanced Stability

Printable and Homogeneous NiO x Hole Transport Layers Prepared by a Polymer‐Network Gel Method for Large‐Area and Flexible Perovskite Solar Cells

Fabrication Toward Flexible Perovskite Solar Cells under Open Air Via Enhanced Intermolecular Chelation

Highly Efficient Large-Area Flexible Perovskite Solar Cells Containing Tin Oxide Vertical Nanopillars without Oxygen Vacancies

Citric Acid Modified Semi-Embedded Silver Nanowires/colorless Polyimide Transparent Conductive Substrates for Efficient Flexible Perovskite Solar Cells

Low‐Temperature‐Deposited TiO 2 Nanopillars for Efficient and Flexible Perovskite Solar Cells

Recycled Utilization of a Nanoporous Au Electrode for Reduced Fabrication Cost of Perovskite Solar Cells

Embedded Nickel‐Mesh Transparent Electrodes for Highly Efficient and Mechanically Stable Flexible Perovskite Photovoltaics: Toward a Portable Mobile Energy Source

Large‐Grained Perovskite Films Enabled by One‐Step Meniscus‐Assisted Solution Printing of Cross‐Aligned Conductive Nanowires for Biodegradable Flexible Solar Cells

A Bendable Nickel Oxide Interfacial Layerviapolydopamine Crosslinking for Flexible Perovskite Solar Cells

Fast and Controllable Electric-Field-Assisted Reactive Deposited Stable and Annealing-Free Perovskite toward Applicable High-Performance Solar Cells

Highly Flexible Organo-Metal Halide Perovskite Solar Cells Based on Silver Nanowire-Polymer Hybrid Electrodes

Enhanced Particle‐to‐Particle Interaction of Tin Oxide Electron Transporter Layer for Scalable Flexible Perovskite Solar Cells

High‐Performance Flexible Perovskite Solar Cells Enabled by Low‐Temperature ALD‐Assisted Surface Passivation