Abstract:Highlights • A straightforward and effective strategy that focuses on low-level control. • Control of the two main climatic variables affecting crop growth and health. • Study of combined use of actuators in greenhouses and their coupling effects. • Use of well-known control techniques for the design of the controllers. • First time application of split range control for humidity in greenhouses. This paper presents a simple and effective control solution to regulate temperature and humidity inside a greenhouse, which are the main climatic variables affecting crop growth and health. A multivariable control strategy with inverted decoupling is proposed in two schemes. The nighttime control scheme uses heating and dehumidification, and the daytime control scheme uses natural ventilation, dehumidification, and humidification. A system identification methodology is used to obtain low-order linear models from data measured in a greenhouse. This simplifies the design of proportional-integral (PI) controllers and allows the use of well-known control techniques. For instance, anti-windup is used to deal with the saturation of the actuators and for a bumpless transfer mechanism to switch between the nighttime and the daytime control schemes. Setpoint weighting is used for the humidity controllers to attenuate undesired effects on the temperature control loop when the humidity setpoint is changed. Furthermore, split range control is used for the first time to control humidity by combining a heat-pump dehumidifier and a fogging system. The control solution presented in this work allows the integral absolute error to be reduced, on average, by 88.5% for the interactions affecting the temperature control loop, and by 85.6% for the humidity control loop, compared to decentralized PI control. The control schemes have been tested in simulation with real disturbance data from a Mediterranean greenhouse and in preliminary form in a real facility to conclude that the proposed multivariable control strategy could be effective in decoupling the temperature and the humidity control loops.

Cheap and versatile humidity regulator for environmentally controlled experiments

OpenHumidistat: Humidity-controlled experiments for everyone

Design, construction, and testing of an accurate low-cost humidistat for laboratory-scale applications

An Arduino-based Low-Cost Hardware for Temperature Control

Design and optimization of digitalization device of temperature control system using PID Ziegler-Nichols control in chemical engineering laboratory

A microcontroller-based approach to control oxygen and establish flexible acclimation regimes

Design for Digital Humidity Measurement and Control Based on Saving Circuit

A low-cost cryogenic temperature measurement system using Arduino microcontroller

A Museum Storeroom Air-Conditioning System Employing the Temperature and Humidity Independent Control Device in the Cooling Coil

Intelligent control and implementation of a new type constant temperature and humidity box

PID Controller for Optimum Energy Efficiency in Air-Conditioner

Optimum Control Strategy and Performance Simulation of a Constant Temperature and Humidity Air-conditioning System

Design of the Humidity and Temperature Controller Using the Moistures of Leaf and Soil

AUTOMATION AND CONTROL SYSTEM FOR CARBON DIOXIDE CONCENTRATION AND HUMIDITY IN A CLOSED ENVIRONMENT

Open-Source Low-Cost Wireless Potentiometric Instrument for Ph Determination Experiments

Intelligent Regulation of Temperature and Humidity in Vegetable Greenhouses Based on Single Neuron PID Algorithm

Intelligent, low-cost, high-performance system for environmental air quality monitoring through integrated gas, temperature, and humidity analysis

A practical solution for multivariable control of temperature and humidity in greenhouses

An Affordable and Customizable Arduino-based Thermo-controller for Thermal Ecology Experiments

Bioreactor Temperature Control System Using PID Controller

Configurable Multi-channel Temperature Control System Based on PID