Abstract:For greater productivity, oil and gas are increasingly being transported at higher pressures through steel pipelines, which has necessitated the development of thick-gauge high-strength–high-toughness line pipe steels. In this work, the microstructural evolution of a 22-mm-thick Nb and Ti microalloyed API Grade X70 line pipe steel subjected to thermomechanical processing is investigated. The microstructure of the steel sample was analyzed using advanced characterization techniques to glean insight into microstructure and texture. The surface of the plate consisted of a relatively higher fraction of polygonal ferrite, whereas the plate interior possessed a higher fraction of non-polygonal ferritic structure. The grain size was found to increase from the surface to the center of the plate. The presence of a higher fraction of secondary phases, such as degenerated pearlite (DP) and martensite austenite (MA) constituents, was observed toward the core of the plate. The major texture components ({001} , {113} , and {332} ) were found to be present through the thickness. However, their intensity increased toward the core of the plate. Higher intensity of {113} toward the core of the plate may cause a higher degree of anisotropy of mechanical properties than the surface of the plate. The detrimental impact of {001} texture on fracture may get counterbalanced by the beneficial impact of {113} texture on toughness. A high fraction of composite coarse precipitates ((Nb,Ti)CN type) in the outer part of the plate may contribute to an increase in grain refinement in the final microstructure during the processing of the plate. In contrast, a high fraction of fine precipitates (<20 nm) observed in the ferrite matrix at the core may contribute to a higher ductile-brittle transition temperature. An in-depth understanding of microstructure will allow its correlation with the mechanical properties needed for thick gauge pipelines with higher transmission rates.

Study on Microstructure and Tensile Behavior of X70 Dual-Phase Steel in Different Directions: Experiments and Crystal Plasticity Finite Element Method

Effect of through-thickness microstructure inhomogeneity on mechanical properties and strain hardening behavior in heavy-wall X70 pipeline steels

Microstructure Characterization and Strengthening Mechanism Analysis of X100 Pipeline Steel

Microstructure and mechanical properties of X90 high strength pipeline steel

Strength, Strain Capacity and Toughness of Five Dual-Phase Pipeline Steels

Effect of deformation amount distribution in the austenite recrystallization temperature region on the microstructure and mechanical properties of the X70 pipeline steel

Study on Fracture Behavior and Toughening Mechanisms of Ultra-High-Strength Pipeline Steel

Microstructure and properties of X100 large-deformability pipeline steel based on heating on-line partitioning

Effects of microstructure and crystallographic texture on anisotropy of tensile strength of X80 pipeline steel

Tensile Deformation and Fracture Behavior of API-5L X70 Line Pipe Steel

The Microstructure and Mechanical Property of X70, X80 and X100 Grade Pipeline Steel

Fatigue Properties of X80 Pipeline Steels with Ferrite/bainite Dual-Phase Microstructure

Characterization of ductile fracture criterion for API X80 pipeline steel based on a phenomenological approach

Studying the Microstructural Evolution in a Hot-Rolled Thick Gauge Microalloyed Line Pipe Steel

Effect of Bainite to Ferrite Yield Strength Ratio on the Deformability of Mesostructures for Ferrite/Bainite Dual-Phase Steels

Crystal Plasticity Model Analysis for the Macro-to-Micro Mechanical Behavior of Different Sub-Regions in a Marine Steel Weld

Development and Production of Ultra-High Strength Linepipes With Dual-Phase Microstructure for High Strain Application

Microstructural Evolution and Mechanical Properties of Reeled X65 Pipeline Steel during Cyclic Plastic Deformation and Natural Aging

Controlled Rolling of X80 Pipeline Steel in the Austenite Recrystallization Temperature Region and Its Effect on the Microstructure and Mechanical properties

Investigation of failure mechanisms in dual-phase steels through cohesive zone modeling and crystal plasticity frameworks

Extensive anisotropic lath martensite plasticity in dual-phase steels: A numerical-experimental investigation