Abstract:Accurate and efficient position estimation is an important element in flight missions for autonomous aerial vehicles such as Unmanned Aerial Vehicles (UAVs). UAVs rely on sensors that provide information regarding position, speed, and orientation. GPS and IMU are sensors that can provide navigation information, where each sensor has characteristics that can complement each other's shortcomings. Research related to the integration of GPS and IMU sensors for positioning with increasingly higher accuracy has been widely applied, one of which is the Kalman Filter method. Kalman filter not only performs digital signal filtering but is also capable of smoothing and predicting recursion to obtain the most accurate estimation results. Along with the development of the modification of the Kalman Filter, the Unscented Kalman Filter (UKF) method is a solution in overcoming nonlinear systems with estimation results approaching the actual value, so that the positioning accuracy is higher and convergent. This study intends to analyze the fusion performance of GPS and IMU sensor data using the UKF method on Medical Drones in an open space in order to obtain a position with high accuracy. UKF simulations on Medical Drones were carried out using a mathematical model on a 6 DOF (Degree of Freedom) UAV. The sensor data fusion performance was tested by comparing the results of the UKF method with the EKF on the Geopointer software. The results showed that the UKF simulation gave a positional accuracy of 0.022 m to the measurement data. The UKF simulation results in a better positioning accuracy when compared to EKF processing on the Geopointer software which only achieves a position accuracy of 8.467 m. The low accuracy of the EKF processing results is due to the mismatch of the IMU parameters obtained with the actual Medical Drone parameters.

Error State Extended Kalman Filter Multi-Sensor Fusion for Unmanned Aerial Vehicle Localization in GPS and Magnetometer Denied Indoor Environments

Real-Time Onboard 3D State Estimation of an Unmanned Aerial Vehicle in Multi-Environments Using Multi-Sensor Data Fusion

A Multi-Sensor Fusion MAV State Estimation from Long-Range Stereo, IMU, GPS and Barometric Sensors

Semi-Aerodynamic Model Aided Invariant Kalman Filtering for UAV Full-State Estimation

Inertial-Kinect Fusion for Robot Navigation based on the Extended Kalman Filter

Body-Centered Dynamically-Tuned Error-State Extended Kalman Filter for Visual Inertial Odometry in GNSS-Denied Environments

UKF data fusion of odometry and magnetic sensor for a precise indoor localization system of an autonomous vehicle

Research on multi-sensor data fusion for integrated navigation system

Multi-sensor Data Fusion for UAV Landing Based on Federal Variational Bayesian Filtering

GNSS-INS-Dynamic Fusion with Robustness to Outliers Based on External Force State Estimation

Heterogeneous Sensor Information Fusion based on Kernel Adaptive Filtering for UAVs' Localization

Onboard Real-Time Multi-Sensor Pose Estimation for Indoor Quadrotor Navigation with Intermittent Communication

Multilayer low-cost sensor local-global filtering fusion integrated navigation of small UAV

Combining Extended Kalman Filter with Complementary Filter for Uav Attitude Estimation Based on Mems Marg Sensors

Multi-sensor data fusion for indoor drone positioning

Data Fusion of UWB and IMU based on Unscented Kalman Filter for Indoor Localization of Quadrotor UAV

Model-Free Integrated Navigation of Small Fixed-Wing UAVs Full State Estimation in Wind Disturbance

Indoor SLAM for Micro Aerial Vehicles Using Visual and Laser Sensor Fusion

Analysis of GNSS and IMU Sensor Data Fusion Using the Unscented Kalman Filter Method on Medical Drones in Open Air

IMU/Magnetometer/Barometer/Mass-Flow Sensor Integrated Indoor Quadrotor UAV Localization with Robust Velocity Updates

Extended Kalman Filter for Real Time Indoor Localization by Fusing WiFi and Smartphone Inertial Sensors.