Abstract:With the increase of the rotor diameter and the deterioration of operating conditions, modern wind turbines suffer from more and more significant time-varying non-torque loads, which increases the burden of turbine structures especially the gearbox. Based on an aeroelastic loose coupling approach and assembly of the finite element method, an integrated drivetrain coupling analysis model including blade module, aerodynamic module, and gearbox module is established in this study. This proposed model is validated by comparing the calculation results with previous literature. Taking National Renewable Energy Laboratory 5-MW wind turbine as the research object, the gearbox vibration responses, gear meshing forces and bearing forces under non-torque loads caused by blade gravity, wind shear (WS), tower shadow (TS) and yawed inflow are studied in detail. Results show that the y-direction displacements of the gearbox, sun gear 1, sun gear 2 and gear are larger than those in x-direction because Fy or M x generated by blade gravity, WS and TS dominates the non-torque loads. The non-torque loads lead to a non-uniform planet load sharing especially for the planetary gear stage 1. Because of the fluctuations of non-torque loads, not only the rotation frequencies of the corresponding carrier but also the multiple frequencies of the carrier 1 are observed in the frequency spectrums. The non-torque loads are mainly borne by carrier 1 bearings. Except for the blade gravity, the bearing forces caused by other unsteady inflows have obvious fluctuations. (C) 2020 Elsevier Inc. All rights reserved.

Nonlinear characteristics of a multi-degree-of-freedom wind turbine’s gear transmission system involving friction

Nonlinear Vibration Characteristics of Helical Bevel Gear Systemand Parameters Influences

Dynamic characteristics analysis of a high-speed-level gear transmission system of a wind turbine considering a time-varying wind load and an electromagnetic torque disturbance

Translation torsion coupling dynamic modeling and nonlinearities investigation of non-circular planetary gear systems

Nonlinear dynamics modeling and analysis of transmission error of wind turbine planetary gear system

Analysis of nonlinear dynamic characteristic of a planetary gear system considering tooth surface friction

Nonlinear Torsional Dynamics of Star Gearing Transmission System of GTF Gearbox

Nonlinear dynamic characteristics of planetary gear transmission system considering squeeze oil film

Nonlinear dynamics analysis of gear transmission system considering tooth surface friction and thermal deformation

Dynamic Modeling and Analysis of Wind Turbine Drivetrain Considering the Effects of Non-Torque Loads

Analysis of Nonlinear Vibration Characteristics of the Concentric Face-Gear Split-Torque Transmission System

Nonlinear Vibration Analysis of the Coupled Gear-Rotor-Bearing Transmission System for a New Energy Vehicle

Nonlinear Dynamics Analysis of a Multistage Planetary Gear Transmission System

Research on Transmission Characteristics and Torsional Vibration Control of Hybrid Transmission Wind Turbines

Nonlinear dynamic analysis of an external gear system with meshing beyond pitch point

Study on nonlinear dynamic characteristics of a two-speed transmission system at low speed

Analysis of Vibration Characteristics of Face Gear powering-split Transmission System

Non-inertial dynamic modeling and gear mesh characteristic analysis of planetary gear train system

Nonlinear dynamic analysis of high-speed gear pair with wear fault and tooth contact temperature for a wind turbine gearbox

Dynamic Response Analysis Of Wind Turbine Planetary Gear System With Interval Stiffness Parameters

Nonlinear dynamic characteristics of wind power concentric planetary-face gear system with elastic lubrication and friction considering thermal effect under random wind load