Abstract:Abstract Per recent analyses, in the near future, over half amount of the oil extracted globally, will require some form of enhanced oil recovery (EOR) techniques. Existing literature and historical investigations suggest that in oil reservoirs having viscosities between 10 – 150 m.Pa.s, there is a significant potential for tertiary recovery through the application of polymer flooding. For reservoir oil viscosities above 150 mPa.s, the polymer pumping efficiency goes down as polymer injectivity reduces significantly with increasing injection water viscosity that are used to attain a favorable mobility ratio at such high oil viscosities. To overcome this limiting factor, in this study, we propose the use of supramolecular assemblies (SMA) that have adjustable viscosity properties. Complexation of long-chain amino-amides and maleic acid is used to make these assemblies, which allow it to have reversible viscosity depending on the solution pH level. To maintain high injection efficiency, during pumping, SMA solutions will be kept at low viscosity values. On entry in deep reservoir or at oil contact phase, through introduction of an external stimulus the viscosity of SMA solution will be reversed to a much higher viscosity. This will allow to sufficiently improve the mobility ratio. Preliminary results from lab-scale studies have indicated that along with reversibly adjustable viscosity property, SMA solutions are also tolerant to high temperatures and salt concentrations. Supramolecular solutions can be considered as healable polymer systems, since unlike conventional polymer they disassemble and re-assemble when exposed to high temperature and stress conditions. In such conditions, conventional polymers generally undergo degradation. Additionally, through molecular scission processes SMA solutions can also be used in highly confining environments as well as in permafrost conditions and thin zones where conventional thermal techniques are not applicable. The objective of this work is the development of novel SMA system that have the aforementioned properties of reversibly adjustable viscosity through pH, tolerance to high temperature and salt concentrations through desired interfacial properties. Lab-scale preliminary results have shown the potential economic benefits of the use of SMA solutions on a field-wide scale. Based on the results, it must be emphasized that SMA systems have a worldwide application in oil reservoirs for EOR purposes.

Preparation of a Hydrophobic-Associating Polymer with Ultra-High Salt Resistance Using Synergistic Effect

Study on Synergistic Effect Between Wormlike Micelles and Hydrophobically Modified Poly(Acrylic Acid) in Salt Solution

Synthesis and Performance of a Salt-Tolerant Poly(AM/NVP/APEG/DMAAC-18) Polymer

Salt resistance study and molecular dynamics simulation of hydrophobic-association polymer with internal salt structure

Novel Hydrophobic Associating Polymer with Good Salt Tolerance

Smart Nanoparticles for Conformance Improvement in Waterflooding

One-pot fabrication of a double tailed hydrophobic monomer and its application in synthesis of salt-resistant polymers

Preparation of a salt-responsive zwitterionic hydrophobically associating polymer and its application in a saturated sodium chloride drilling fluid

Synthesis and molecular dynamics simulation of amphoteric hydrophobically associating polymer

Rheological behavior of hydrophobic association polyacrylamides with high salt resistance and corrosion inhibition: Cross-linking modification based on trace dopamine hydrochloride derivatives

Incorporation of Partially Hydrolyzed Polyacrylamide With Zwitterionic Units and Poly(Ethylene Glycol) Units Toward Enhanced Tolerances to High Salinity and High Temperature

Preparation and Performance Evaluation of Self-Cementing Nanoscale Polymeric Microspheres with Salt and Temperature Tolerance

Investigation of a hydrophobically associating polymer’s temperature and salt resistance for fracturing fluid thickener

Experimental Investigation of a Mechanically Stable and Temperature/Salinity Tolerant Biopolymer toward Enhanced Oil Recovery Application in Harsh Condition Reservoirs

Fracturing Fluid Polymer Thickener with Superior Temperature, Salt and Shear Resistance Properties from the Synergistic Effect of Double-Tail Hydrophobic Monomer and Nonionic Polymerizable Surfactant

Optimization of the Methods to Develop Stable Polymer Gels for Water Management in Medium- and Ultra-High-Salinity Reservoirs

Research on synthesis and salt thickening behavior of a binary copolymer amphiphilic polymer

Application of a Zwitterionic Hydrophobic Associating Polymer with High Salt and Heat Tolerance in Brine-Based Fracturing Fluid

Assessment of Polyacrylamide Based Co-Polymers Enhanced by Functional Group Modifications with Regards to Salinity and Hardness

Salt-responsive zwitterionic copolymer as tackifier in brine drilling fluids

Fabrication of Ph-Sensitive Superhydrophilic/Underwater Superoleophobic Poly(vinylidene Fluoride)-Graft-(sio2 Nanoparticles and PAMAM Dendrimers) Membranes for Oil-Water Separation.