Review of the U.S. military's human immunodeficiency virus program: a legacy of progress and a future of promise.

J. Okulicz,C. Beckett,J. Blaylock,S. Hakre,B. Agan,N. Michael,S. Peel,P. Scott,S. Cersovsky

2017-09-01

MSMR

Abstract:

What problem does this paper attempt to address?

Bearing fault diagnosis method based on Gramian angular field and ensemble deep learning

Yanfang Han,Baozhu Li,Yingkun Huang,Liang Li

DOI: https://doi.org/10.21595/jve.2022.22796

2022-10-21

Journal of Vibroengineering

Abstract:Inspired by the successful experience of convolutional neural networks (CNN) in image classification, encoding vibration signals to images and then using deep learning for image analysis to obtain better performance in bearing fault diagnosis has become a highly promising approach. Based on this, we propose a novel approach to identify bearing faults in this study, which includes image-interpreted signals and integrating machine learning. In our method, each vibration signal is first encoded into two Gramian angular fields (GAF) matrices. Next, the encoded results are used to train a CNN to obtain the initial decision results. Finally, we introduce the random forest regression method to learn the distribution of the initial decision results to make the final decisions for bearing faults. To verify the effectiveness of the proposed method, we designed two case analyses using Case Western Reserve University (CWRU) bearing data. One is to verify the effectiveness of mapping the vibration signal to the GAFs, and the other is to demonstrate that integrated deep learning can improve the performance of bearing fault detection. The experimental results show that our method can effectively identify different faults and significantly outperform the comparative approach.
The Method of Rolling Bearing Fault Diagnosis Based on Multi-Domain Supervised Learning of Convolution Neural Network

Xuejun Liu,Wei Sun,Hongkun Li,Zeeshan Hussain,Aiqiang Liu

DOI: https://doi.org/10.3390/en15134614

IF: 3.2

2022-06-24

Energies

Abstract:The rolling bearing is a critical part of rotating machinery and its condition determines the performance of industrial equipment; it is necessary to detect rolling bearing faults as early as possible. The traditional methods of fault diagnosis are not efficient and are time-consuming. With the help of deep learning, the convolution neural network (CNN) plays a huge role in the data-driven methods of bearing fault diagnosis. However, the vibration signal is non-stationary, contains high noise, and is one-dimensional, which is difficult to analyze directly by the CNN model. Considering the multi-domain learning as an advantage of deep learning, this paper proposes a novel rolling bearing fault diagnosis approach using an improved one-dimensional (1D) and two-dimensional (2D) convolution neural network (CNN) of two-domain information learning. The constructed fault diagnosis model combining 1D and 2D CNN extracts the fault features from the two-domain information of bearing fault samples. The padding and dropout technology are utilized to fully extract features from the raw data and reduce over-fitting. To prove the validity of the proposed method, this paper performs two tests with two bearing datasets, the Case Western Reserve University (CWRU) bearing dataset and the Dalian University of Technology (DUT) vibration laboratory dataset. The experimental results show that our proposed method achieves high recognition accuracy of rolling bearing fault states via two-domain learning of monitoring data, and there is no manual experience necessary. Vibration data under strong noise were also used to test the method, and the results show the superiority and robustness of the proposed method.

energy & fuels
A Deep Learning Method for Bearing Fault Diagnosis Based on Time-Frequency Image

Jianyu Wang,Zhenling Mo,Heng Zhang,Qiang Miao

DOI: https://doi.org/10.1109/access.2019.2907131

IF: 3.9

2019-01-01

IEEE Access

Abstract:Rolling element bearing is a critical component in rotating machinery that reduces the friction between moving pairs. Bearing fault diagnosis is always considered as a research hotspot in the field of prognostics and health management, especially with the application of deep learning. Deep learning, such as a convolutional neural network (CNN), can extract features automatically compared with traditional methods. However, the construction of the CNN model and the training process still need a lot of prior knowledge, and it takes a lot of time to build an optimal model to achieve a high classification accuracy. In addition, great challenges of universal applicability exist when different input forms (e.g., different sampling lengths or signal forms) are considered. This paper presents a universal bearing fault diagnosis model transferred from a well-known Alexnet model, and only the last fully connected layer needs to be replaced, which could reduce prior knowledge and extra time in establishing a new model. Accordingly, it is necessary to convert a raw acceleration signal to a uniform-sized time–frequency image, even when these data have different sizes. Furthermore, standardized images created by eight time–frequency analysis methods are applied to validate the effectiveness of the proposed method in two case studies. The results indicate that this method can be applied in bearing fault diagnosis, and t-SNE helps to understand the process of feature extraction and condition classification.

computer science, information systems,telecommunications,engineering, electrical & electronic
Rolling Bearing Fault Diagnosis Based on Convolutional Neural Network and Support Vector Machine

Laohu Yuan,Dongshan Lian,Xue Kang,Yuanqiang Chen,Kejia Zhai

DOI: https://doi.org/10.1109/access.2020.3012053

IF: 3.9

2020-01-01

IEEE Access

Abstract:Rolling bearings are one of the essential components in rotating machinery. Efficient bearing fault diagnosis is necessary to ensure the regular operation of the mechanical system. Traditional fault diagnosis methods usually rely on a complex artificial feature extraction process, which requires a lot of human expertise. Emerging deep learning methods can reduce the dependence of the feature extraction process on manual intervention effectively. However, its training requires a large number of fault signals, which is difficult to obtain in actual engineering. In this paper, a rolling bearing fault diagnosis method based on Convolutional Neural Network and Support Vector Machine is proposed to solve the above problems. Firstly, the Continuous Wavelet Transform is used to convert one-dimensional original vibration signals into two-dimensional time-frequency images. Secondly, the obtained time-frequency images are input for training the constructed model. Finally, the diagnosis of the fault location and severity is completed. The method is verified on the CWRU data set and the MFPT data set. The results demonstrate that the proposed method achieves higher diagnostic accuracy and stability than other advanced techniques.

computer science, information systems,telecommunications,engineering, electrical & electronic
A multi-scale collaborative fusion residual neural network-based approach for bearing fault diagnosis

Chen Qian,Jun Gao,Xing Shao,Cuixiang Wang

DOI: https://doi.org/10.1088/1361-6501/ad1f2d

IF: 2.398

2024-01-18

Measurement Science and Technology

Abstract:In recent years, deep learning techniques have become popular for diagnosing equipment faults. However, their real industrial application performance is hindered by challenges related to noise and variable load conditions that prevent accurate extraction of valid feature information. To tackle these challenges, this paper proposed a novel approach known as the Multi-Scale Collaborative Fusion Residual Neural Network (MCFRNN) for bearing fault diagnosis. To begin with, the methodology introduces a Multi-Scale Systolic Denoising Module (MSDM) designed to extract features at multiple scales while mitigating the influence of noise. Subsequently, a Central Fusion Module (CFM) is employed to explore the intrinsic correlation among the multiple channels and effectively fuse their respective features. Additionally, a Global Sensing Module (GSM) is incorporated to enhance the perceptual field of MCFRNN, thereby facilitating the extraction of global features. Furthermore, online label smoothing and AdamP are applied to alleviate overfitting and improve the diagnostic capability of MCFRNN under small sample. Finally, the effectiveness of MCFRNN is verified with two publicly available datasets under complex operational and limited sample conditions. The experimental results show that the proposed method has more excellent diagnostic performance and adaptivity than the existing popular methods.

engineering, multidisciplinary,instruments & instrumentation
Rolling bearing fault diagnosis based on feature fusion with parallel convolutional neural network

Mingxuan Liang,Pei Cao,J. Tang

DOI: https://doi.org/10.1007/s00170-020-06401-8

IF: 3.563

2020-11-24

The International Journal of Advanced Manufacturing Technology

Abstract:Deep learning has seen increased application in the data-driven fault diagnosis of manufacturing system components such as rolling bearing. However, deep learning methods often require a large amount of training data. This is a major barrier in particular for bearing datasets whose sizes are generally limited due to the high costs of data acquisition especially for fault scenarios. When small datasets are employed, over-fitting may occur for a deep learning network with many parameters. To tackle this challenge, in this research, we propose a new methodology of parallel convolutional neural network (P-CNN) for bearing fault identification that is capable of feature fusion. Raw vibration signals in the time domain are divided into non-overlapping training data slices, and two different convolutional neural network (CNN) branches are built in parallel to extract features in the time domain and in the time-frequency domain, respectively. Subsequently, in the merged layer, the time-frequency features extracted by continuous wavelet transform (CWT) are fused together with the time-domain features as inputs to the final classifier, thereby enriching feature information and improving network performance. By incorporating empirical feature extraction such as CWT, this proposed method can effectively enable deep learning even with dataset size limitation in practical bearing diagnosis. The algorithm is validated through case studies on publicly accessible experimental rolling bearing datasets. A wide range of dataset sizes is tested with cross-validation, and influencing factors on network performance are discussed. Compared with existing methods, the proposed approach not only possesses higher accuracy but also exhibits better stability and robustness as training dataset sizes and load conditions vary. The concept of feature fusion through P-CNN can be extended to other fault diagnosis applications in manufacturing systems.
A New Bearing Fault Diagnosis Method Based on Deep Transfer Network and Supervised Joint Matching

Chengyao Liu,Fei Dong,Kunpeng Ge,Yuanyuan Tian

DOI: https://doi.org/10.1109/jphot.2024.3392392

IF: 2.4

2024-05-04

IEEE Photonics Journal

Abstract:In practical industrial environment, variable working condition can result in shifts in data distributions, and the labeled fault data in various working conditions is difficult to collect because rotating machines often works in normal status, and the insufficient labeled fault data brings data samples imbalance and performance degradation of intelligent fault diagnosis model. To overcome these problems, by integrating the superiority of deep learning method and feature-based transfer learning method, this work proposes an innovative cross-domain fault diagnosis framework based on deep transfer convolutional neural network and supervised joint matching. First, the continue wavelet transform is used to process original bearing vibration signals and extract time-frequency images. Second, a deep transfer convolutional neural network is built by the way of fine-tuning, and the trained network is used to extract deep features from different domains. Third, a new domain adaptation approach, supervised joint matching, is developed to conduct joint feature distribution matching and instance reweighting with the consideration of maximum marginal criterion. The intelligent bearing fault diagnosis model is then trained to predict the labels of the target domain's feature data. To verify the performance of the proposed approaches, this study uses two distinct datasets pertaining to bearing defects for conducting cross-domain fault diagnosis in the presence of balanced and imbalanced data. The experimental analysis indicates that the designed methods can achieve desirable diagnostic accuracy and possess robust generalization ability.

engineering, electrical & electronic,optics,physics, applied
A Deep Learning Method for Bearing Cross-Domain Fault Diagnostics Based on the Standard Envelope Spectrum

Lubin Zhai,Xiufeng Wang,Zeyiwen Si,Zedong Wang

DOI: https://doi.org/10.3390/s24113500

IF: 3.9

2024-05-29

Sensors

Abstract:Intelligent fault diagnostics based on deep learning provides a favorable guarantee for the reliable operation of equipment, but a trained deep learning model generally has low prediction accuracy in cross-domain diagnostics. To solve this problem, a deep learning fault diagnosis method based on the reconstructed envelope spectrum is proposed to improve the ability of rolling bearing cross-domain fault diagnostics in this paper. First, based on the envelope spectrum morphology of rolling bearing failures, a standard envelope spectrum is constructed that reveals the unique characteristics of different bearing health states and eliminates the differences between domains due to different bearing speeds and bearing models. Then, a fault diagnosis model was constructed using a convolutional neural network to learn features and complete fault classification. Finally, using two publicly available bearing data sets and one bearing data set obtained by self-experimentation, the proposed method is applied to the data of the fault diagnostics of rolling bearings under different rotational speeds and different bearing types. The experimental results show that, compared with some popular feature extraction methods, the proposed method can achieve high diagnostic accuracy with data at different rotational speeds and different bearing types, and it is an effective method for solving the problem with cross-domain fault diagnostics for rolling bearings.

engineering, electrical & electronic,instruments & instrumentation,chemistry, analytical
Deep transfer learning rolling bearing fault diagnosis method based on convolutional neural network feature fusion

Di Yu,Haiyue Fu,Yanchen Song,Wenjian Xie,Zhijie Xie

DOI: https://doi.org/10.1088/1361-6501/acfe31

IF: 2.398

2023-09-29

Measurement Science and Technology

Abstract:Current deep-learning methods are often based on significantly large quantities of labeled fault data for supervised training. In practice, it is difficult to obtain samples of rolling bearing failures. In this paper, a transfer learning-based feature fusion convolutional neural network (TLFFCNN) approach for bearing fault diagnosis is proposed. Specifically, the raw vibration signal features and the corresponding time-frequency image features of the input data are extracted by a one-dimensional convolutional neural network (1D-CNN) and a pre-trained ConvNeXt, respectively, and connected by a feature fusion strategy. Then, the fine-tuning method based on transfer learning can effectively reduce the reliance on labeled samples in the target domain. A wide convolution kernel is introduced in the time-domain signal feature extraction to increase the receptive field, which is combined with the channel attention mechanism to further optimize the feature quality. Finally, two common bearing datasets are utilized for fault diagnosis experiments. The experimental results show that the proposed model achieves an average accuracy of more than 98.63% in both cross-working conditions and cross-device diagnosis tasks. Meanwhile, anti-noise experiments and ablation experiments further validate the accuracy and robustness of the proposed method.

engineering, multidisciplinary,instruments & instrumentation
Bearing fault diagnosis base on multi-scale CNN and LSTM model

Xiaohan Chen,Beike Zhang,Dong Gao

DOI: https://doi.org/10.1007/s10845-020-01600-2

IF: 8.3

2020-06-05

Journal of Intelligent Manufacturing

Abstract:Intelligent fault diagnosis methods based on signal analysis have been widely used for bearing fault diagnosis. These methods use a pre-determined transformation (such as empirical mode decomposition, fast Fourier transform, discrete wavelet transform) to convert time-series signals into frequency domain signals, the performance of dignostic system is significantly rely on the extracted features. However, extracting signal characteristic is fairly time consuming and depends on specialized signal processing knowledge. Although some studies have developed highly accurate algorithms, the diagnostic results rely heavily on large data sets and unreliable human analysis. This study proposes an automatic feature learning neural network that utilizes raw vibration signals as inputs, and uses two convolutional neural networks with different kernel sizes to automatically extract different frequency signal characteristics from raw data. Then long short-term memory was used to identify the fault type according to learned features. The data is down-sampled before inputting into the network, greatly reducing the number of parameters. The experiment shows that the proposed method can not only achieve 98.46% average accuracy, exceeding some state-of-the-art intelligent algorithms based on prior knowledge and having better performance in noisy environments.

engineering, manufacturing,computer science, artificial intelligence
Bearing fault diagnosis method based on CNN-LightGBM

Xin Jia,Boping Xiao,Zhanjuan Zhao,Lin Ma,Naichao Wang

DOI: https://doi.org/10.1088/1757-899X/1043/2/022066

2021-02-04

IOP Conference Series: Materials Science and Engineering

Abstract:In recent years, deep neural networks have been widely used in bearing fault diagnosis. Aiming at the problem that the traditional convolutional neural network (CNN) has insufficient generalization ability and low accuracy in rolling bearing fault diagnosis, this paper presents a new fault diagnosis model based on CNN and light gradient boosting machine (LightGBM). By using the original vibration signal directly, the new model firstly uses the deep convolutional neural network with small kernel to extract features and introduces the batch normalization and the Adam algorithm to improve the rolling bearing fault diagnosis model convergence speed and generalization ability. Then, combined with the efficient and accurate characters of LightGBM in classification prediction, the extracted features are imported into LightGBM for training to complete bearing fault diagnosis of different fault types. This new model can realize the fault diagnosis of rolling bearing directly from end to end without extracting the fault feature of rolling bearing vibration signal by hand. The results of the comparative experiments on the Case Western Reserve University (CWRU) public bearing dataset show that the new model improves the accuracy compared to just using CNN. The experimental results also confirm that the proposed method has feature learning ability and has good ability for fault diagnosis.
Rolling Bearing Fault Diagnosis Based on Convolutional Neural Network and Multi-sensor Information Fusion

Jiyou Fei,Xiaodong Liu,Lin Li,Xing Zhao

DOI: https://doi.org/10.1109/ITAIC54216.2022.9836579

2022-06-17

Abstract:Condition monitoring and fault diagnosis of bearings are of great research significance for the safety and reliability of the rotating mechanical system. However, the mechanical failure caused by rolling bearings is difficult to be accurately identified by traditional methods based on physical mechanism and signal analysis which are also time-consuming. Therefore, a bearing fault diagnosis model based on multi-sensor information fusion and one-dimensional convolution neural network (1D-CNN) was proposed. The bearing fault vibration feature from an aeroengine was extracted and analyzed by using the 1D-CNN. The waveform signals collected by different sensors were input and the final classification results through convolution and pool operation were output, which abandons the traditional tedious steps based on signal analysis fault diagnosis. The experimental results showed that the accuracy of the model can reach 100% by using four accelerometers. Compared with support vector machine (SVM) and feedforward neural network (FNN), the accuracy of the method is improved by 36.92 % and 18.9% respectively, which provides a feasible method for aeroengine bearing fault diagnosis.

Computer Science,Engineering
Bearing Fault Diagnosis Based on ICEEMDAN Deep Learning Network

Bo Liang,Wuwei Feng

DOI: https://doi.org/10.3390/pr11082440

IF: 3.5

2023-08-15

Processes

Abstract:Bearing fault diagnosis has evolved from machine learning to deep learning, addressing the issues of performance degradation in deep learning networks and the potential loss of key feature information. This paper proposes a fault diagnosis method for rolling bearing faults based on ICEEMDAN combined with the Hilbert transform (ICEEMDAN-Hilbert) and a residual network (ResNet). Firstly, the collected fault vibration signals are classified as fault samples and randomly sampled with a fixed length. The IMF components obtained by decomposing the bearing fault vibration signals using ICEEMDAN are able to maximize the restoration of fault vibrations. Then, the IMF components are transformed from one-dimensional time-domain signals to two-dimensional time-frequency domain images using Hilbert transformation. The RGB color images can be directly used in deep learning models without the need for manual labeling of a large amount of data, thereby avoiding the loss of key feature information. The ResNet network incorporates the attention mechanism (CBAM) structure for the precise extraction of fault features, enabling a more detailed classification of fault features. Additionally, the residual network effectively addresses the problem of performance degradation in multi-layer network models. Finally, transfer learning is applied in the deep learning network by freezing the training layer parameters and training the fully connected layer. This effectively solves the problem of insufficient data in real operating conditions, which hinders deep training of the model, while also reducing the training time. By combining the ResNet network with the convolutional block attention module (CBAM) structure, the model completes the recognition and training of time-frequency images for rolling bearing faults. The results demonstrate that the ResNet with CBAM model has strong fault feature extraction capabilities, achieving higher accuracy, 7–12% higher than other conventional network models, and exhibiting superior diagnostic performance compared to other deep learning models.

engineering, chemical
A Bearing Fault Diagnosis Method Based on Spectrum Map Information Fusion and Convolutional Neural Network

Baiyang Wang,Guifang Feng,Dongyue Huo,Yuyun Kang

DOI: https://doi.org/10.3390/pr10071426

IF: 3.5

2022-07-22

Processes

Abstract:With the development of information technology, it has become increasingly important to use intelligent algorithms to diagnose mechanical equipment faults based on vibration signals of rolling bearings. However, with the application of high-performance sensors in the Internet of Things, the complexity of real-time classification of multichannel, multidimensional sensor signals is increasing. In view of the need for intelligent methods for fault diagnosis methods of mechanical equipment, the generalization ability of fault diagnosis models also needs to be further strengthened. In this context, in order to make fault diagnosis intelligent and efficient, a bearing fault diagnosis method based on spectrum map information fusion and convolutional neural network (CNN) is proposed. First, short-time Fourier transform (STFT) is used to analyze the multichannel vibration signal of the rolling bearing and obtain the frequency domain information of the signal over a period of time. Second, the information fusion is converted into two-dimensional (2D) images, which are input into CNN for training, and the bearing fault identification model is obtained. Next, the frequency domain information of each signal is converted into a 2D spectrum map, which is used as a CNN training dataset to train a bearing fault identification model. Finally, the diagnostic model is validated using the existing datasets. The results show that the accuracy of fault diagnosis using the proposed bearing is greater than 99.4% and can even reach 100%. The proposed method considerably reduces the workload of the diagnosis process, with strong robustness and generalization ability.

engineering, chemical
Fault Diagnosis Method for Bearing Based on Attention Mechanism and Multi-Scale Convolutional Neural Network

Qimin Shen,Zengqiang Zhang

DOI: https://doi.org/10.1109/access.2024.3357113

IF: 3.9

2024-02-03

IEEE Access

Abstract:Convolutional neural networks (CNNs) serve as powerful feature extraction tools capable of effectively extracting information from complex environments, thus improving the accuracy of fault identification for bearing data. In this paper, we present a method for diagnosing bearing faults using an attention mechanism and a multi-scale convolutional neural network (MSCNN). Firstly, truncate and sample the rolling bearing data, and use continuous wavelet transform to generate corresponding time-frequency images, which will be used as inputs to the neural network. Next, the MSCNN, which includes efficient convolutional modules with residual structures, is utilized to extract features from the input data while maximizing the retention of valuable information. The extracted data then undergoes feature selection through the employment of an Efficient Convolutional Module (ECM) with channel attention. Finally, after being mapped through fully connected layers, the features are fed into a softmax layer for fault category prediction. In this study, the model results were tested and verified using the Case Western Reserve University (CWRU) dataset and the bearing dataset of Jiangnan University(JNU). A comparison was made with the LeNet model, ResNet model, LSTM model, and WDCNN model. The results showed that the classification accuracy of the ten types of bearing signals at the same speed can reach 100%, and the classification accuracy of the thirty types of bearing signals at different speeds can reach over 99.4%, significantly higher than the other models. The proposed method achieves the recognition of different fault states of rolling bearings under complex conditions, including multiple operating conditions and variable operating conditions. It is capable of extracting the global characteristic information of bearing faults, resulting in high diagnostic accuracy and good generalization ability. This method can provide reference for the diagnosis of rolling bearing faults under corresponding operating conditions.

computer science, information systems,telecommunications,engineering, electrical & electronic
An Intelligent Fault Diagnosis Method of Rolling Bearings Based on Short-Time Fourier Transform and Convolutional Neural Network

Qi Zhang,Linfeng Deng

DOI: https://doi.org/10.1007/s11668-023-01616-9

2023-02-08

Journal of Failure Analysis and Prevention

Abstract:The rolling bearing is the key component of rotating machinery, and fault diagnosis for rolling bearings can ensure the safe operation of rotating machinery. Fault diagnosis technology based on deep learning has been largely studied for bearing fault diagnosis. However, for the deep learning model based on convolutional neural network, there are some intrinsic problems of producing inconspicuous features and useful feature information loss in the process of feature extraction of the raw fault vibration signals. In this work, an intelligent fault diagnosis method of rolling bearings based on short-time Fourier transform and convolutional neural network (STFT-CNN) is proposed. The one-dimensional vibration signals are converted into time–frequency images by STFT. Then, time–frequency images are inputted into STFT-CNN model for fault feature learning and fault identification. For the STFT of the vibration signals, the window type, window width and translation overlap width of the five typical window functions are studied and optimal one is obtained. And in the STFT-CNN model, the stacked double convolutional layers are adopted to improve the nonlinear expression capability of the model. To verify the effectiveness of the proposed method, experiments are carried out on the Case Western Reserve University (CWRU) and the Machine Failure Prevention Technology (MFPT) Society bearing datasets. The results show that the proposed method outperforms other comparative methods and reaches the identification accuracy of 100% and 99.96% for CWRU and MFPT, respectively.
A Novel Rolling Bearing Fault Diagnosis Method Based on BLS and CNN with Attention Mechanism

Xiaojia Wang,Tong Hua,Sheng Xu,Xibin Zhao

DOI: https://doi.org/10.3390/machines11020279

IF: 2.899

2023-02-16

Machines

Abstract:In actual industrial application scenarios, noise pollution makes it difficult to extract fault features accurately via conventional methods. A novel method for rolling bearing fault diagnosis combining a convolutional neural network (CNN), an attention mechanism for a squeeze-and-excitation network (SENet) module and a broad learning system (BLS) is proposed (SECNN–BLS). The one-dimensional bearing vibration signal is processed by using multiple short-time Fourier transforms (STFT); the two-dimensional image in the time-frequency domain is used as the model input. In the CNN fault feature extraction process, SENet is introduced to replace the CNN convolution layer, and global information is obtained through the squeeze operation. Excitation operation captures the importance of image channels, assigns weights adaptively to improve the attention on important information and eliminates the interference of irrelevant features without increasing the spatial and temporal complexity. The weighted feature representation is then transferred to the BLS input. The BLS has the characteristics of a flat structure and ridge regression to quickly solve the weights; as a fault classifier, it can save more computing resources and improve the accuracy of the fault classification. The SECNN–BLS fault diagnosis has achieved more than 98% accuracy on the Society for Machinery Failure Prevention Technology (MFPT) dataset. We also demonstrate the excellent performance of SECNN–BLS in a noisy environment.

engineering, mechanical, electrical & electronic
Bearing Feature Extraction and Fault Diagnosis Algorithm Based on Convolutional Neural Networks

Yi Sun,Hongli Gao,Hongliang Song,Xin Hong,Qi Liu

DOI: https://doi.org/10.1109/phm-chongqing.2018.00139

2018-01-01

Abstract:The first step of the traditional fault diagnosis method is to process the signal and then put the signal into the classifier for recognition. The feature extraction process depends on the experimenter's experience, and the recognition rate of the shallow diagnostic model does not achieve satisfactory results. The traditional diagnosis algorithms are based on a single object, so that their versatility can not be guaranteed, and they fail to meet the requirements of fault diagnosis in the big data era. In view of this problem, this paper presents an intelligent diagnosis algorithm based on convolution neural network, which can automatically complete the feature extraction and fault identification of the signal. The validity of the method is validated by using bearing data, and tests were performed using different sample sizes to analyze their impact on the diagnostic ability of CNN. The test results show that the proposed method has an accuracy rate of 99.82% for bearing fault diagnosis, which achieves the highest recognition rate and can meet the timeliness of fault diagnosis.
A novel deep learning framework for rolling bearing fault diagnosis enhancement using VAE-augmented CNN model

Yu Wang,Dexiong Li,Lei Li,Runde Sun,Shuqing Wang

DOI: https://doi.org/10.1016/j.heliyon.2024.e35407

IF: 3.776

2024-07-30

Heliyon

Abstract:In the context of burgeoning industrial advancement, there is an increasing trend towards the integration of intelligence and precision in mechanical equipment. Central to the functionality of such equipment is the rolling bearing, whose operational integrity significantly impacts the overall performance of the machinery. This underscores the imperative for reliable fault diagnosis mechanisms in the continuous monitoring of rolling bearing conditions within industrial production environments. Vibration signals are primarily used for fault diagnosis in mechanical equipment because they provide comprehensive information about the equipment's condition. However, fault data often contain high noise levels, high-frequency variations, and irregularities, along with a significant amount of redundant information, like duplication, overlap, and unnecessary information during signal transmission. These characteristics present considerable challenges for effective fault feature extraction and diagnosis, reducing the accuracy and reliability of traditional fault detection methods. This research introduces an innovative fault diagnosis methodology for rolling bearings using deep convolutional neural networks (CNNs) enhanced with variational autoencoders (VAEs). This deep learning approach aims to precisely identify and classify faults by extracting detailed vibration signal features. The VAE enhances noise robustness, while the CNN improves signal data expressiveness, addressing issues like gradient vanishing and explosion. The model employs the reparameterization trick for unsupervised learning of latent features and further trains with the CNN. The system incorporates adaptive threshold methods, the "3/5" strategy, and Dropout methods. The diagnosis accuracy of the VAE-CNN model for different fault types at different rotational speeds typically reaches more than 90 %, and it achieves a generally acceptable diagnosis result. Meanwhile, the VAE-CNN augmented fault diagnosis model, after experimental validation in various dimensions, can achieve more satisfactory diagnosis results for various fault types compared to several representative deep neural network models without VAE augmentation, significantly improving the accuracy and robustness of rolling bearing fault diagnosis.
An Ensemble Convolutional Neural Networks for Bearing Fault Diagnosis Using Multi-Sensor Data

Yang Liu,Xunshi Yan,Chen-an Zhang,Wen Liu

DOI: https://doi.org/10.3390/s19235300

IF: 3.9

2019-12-02

Sensors

Abstract:Multi-sensor data fusion is a feasible technique to achieve accurate and robust results in fault diagnosis of rotating machinery under complex conditions. However, the problem of information losses is always ignored during the fusion process. To solve above problem, an ensemble convolutional neural network model is proposed for bearing fault diagnosis. The framework of the proposed model contains three convolutional neural network branches: one multi-channel fusion convolutional neural network branch and two 1-D convolutional neural network branches. The former branch extracts the coupling features based on multi-sensor data and the latter two branches extract the inherent features based on single-sensor data, which can collect comprehensive fault information and reduce information losses. Furthermore, the support vector machine ensemble strategy is employed to fuse the results of multiple branches, which can improve the generalization and robustness of the proposed model. The experiments show that the proposed can obtain more effective and robust results than other methods.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation

Review of the U.S. military's human immunodeficiency virus program: a legacy of progress and a future of promise.

Bearing fault diagnosis method based on Gramian angular field and ensemble deep learning

The Method of Rolling Bearing Fault Diagnosis Based on Multi-Domain Supervised Learning of Convolution Neural Network

A Deep Learning Method for Bearing Fault Diagnosis Based on Time-Frequency Image

Rolling Bearing Fault Diagnosis Based on Convolutional Neural Network and Support Vector Machine

A multi-scale collaborative fusion residual neural network-based approach for bearing fault diagnosis

Rolling bearing fault diagnosis based on feature fusion with parallel convolutional neural network

A New Bearing Fault Diagnosis Method Based on Deep Transfer Network and Supervised Joint Matching

A Deep Learning Method for Bearing Cross-Domain Fault Diagnostics Based on the Standard Envelope Spectrum

Deep transfer learning rolling bearing fault diagnosis method based on convolutional neural network feature fusion

Bearing fault diagnosis base on multi-scale CNN and LSTM model

Bearing fault diagnosis method based on CNN-LightGBM

Rolling Bearing Fault Diagnosis Based on Convolutional Neural Network and Multi-sensor Information Fusion

Bearing Fault Diagnosis Based on ICEEMDAN Deep Learning Network

A Bearing Fault Diagnosis Method Based on Spectrum Map Information Fusion and Convolutional Neural Network

Fault Diagnosis Method for Bearing Based on Attention Mechanism and Multi-Scale Convolutional Neural Network

An Intelligent Fault Diagnosis Method of Rolling Bearings Based on Short-Time Fourier Transform and Convolutional Neural Network

A Novel Rolling Bearing Fault Diagnosis Method Based on BLS and CNN with Attention Mechanism

Bearing Feature Extraction and Fault Diagnosis Algorithm Based on Convolutional Neural Networks

A novel deep learning framework for rolling bearing fault diagnosis enhancement using VAE-augmented CNN model

An Ensemble Convolutional Neural Networks for Bearing Fault Diagnosis Using Multi-Sensor Data