Abstract:Ethylene-propylene-diene monomer (EPDM) is a key engineering material; its mechanical characterization is important for the safe use of the material. In this paper, the coupled effects of thermal degradation temperature and time on the tensile mechanical behavior of EPDM rubber were investigated. The tensile stress-strain curves of the aged and unaged EPDM rubber show strong nonlinearity, demonstrating especially rapid stiffening as the strain increases under small deformation. The popular Mooney–Rivlin and Ogden (N = 3) models were chosen to fit the test data, and the results indicate that neither of the classical models can accurately describe the tensile mechanical behavior of this rubber. Six hyperelastic constitutive models, which are excellent for rubber with highly nonlinearity, were employed, and their abilities to reproduce the stress-strain curve of the unaged EPDM were assessed. Finally, the Davis–De–Thomas model was found to be an appropriate hyperelastic model for EPDM rubber. A Dakin-type kinetic relationship was employed to describe the relationships between the model parameters and aging temperature and time, and, combined with the Arrhenius law, a thermal aging constitutive model for EPDM rubber was established. The ability of the proposed model was checked by independent testing data. In the moderate strain range of 200%, the errors remained below 10%. The maximum errors of the prediction results at 85 °C for 4 days and 100 °C for 2 and 4 days were computed to be 17.06%, 17.51% and 19.77%, respectively. This work develops a theoretical approach to predicting the mechanical behavior of rubber material that has suffered thermal aging; this approach is helpful in determining the safe long-term use of the material.

Evaluation of the aging coefficient and the aging lifetime of carbon black-filled styrene-isoprene-butadiene rubber after thermal-oxidative aging

The evolution of microstructure of Styrene-Isoprene-Butadiene Rubber during the thermal-oxidative aging process using In-situ FTIR way

Evaluation of the improved properties of SBR/weathered coal modified bitumen containing carbon black

Aging behaviors of trans-1, 4-poly (isoprene-co-butadiene) copolymer rubber

Cracking, structural, and mechanical property changes of SIBR and related elastomers during the ozone aging process

IMPACT OF CARBON BLACK CONTENT IN RELATIONSHIPS BETWEEN MECHANICAL PROPERTIES AND CROSSLINKING OF FILLED POLYCHLOROPRENE DURING OXIDATIVE AGING

Systematic Investigation of the Degradation Properties of Nitrile-Butadiene Rubber/Polyamide Elastomer/Single-Walled Carbon Nanotube Composites in Thermo-Oxidative and Hot Oil Environments

Rheological and chemical indices to characterize long-term oxidative aging of SBS/rubber composite-modified asphalt binders

Tribological behaviour of acrylonitrile-butadiene rubber under thermal oxidation ageing

Effect of Combined Fatigue and Chemical Aging Conditions on the Mechanical Property, Structure, and Morphology of Styrene–butadiene–styrene Elastomer

Investigation of Crosslinking in the Thermooxidative Aging of Nitrile–butadiene Rubber

The influence of amine antioxidant D37 on the ozone aging process of SIBR

Mechanical, Thermal, and Morphological Behavior of Silicone Rubber during Accelerated Aging

Ageing behaviour and molecular/network structure evolution of EPDM/carbon black composites under compression and in thermal-oxidative environments

CHANGES OF CHEMICAL STRUCTURE AND MECHANICAL PROPERTY LEVELS DURING THERMO-OXIDATIVE AGING OF NBR

Improving Thermal-oxidative Aging Resistance of Styrene-butadiene Rubber by Antioxidant Loaded Silica Aerogel

Influence of Thermal Aging in Oil on the Friction and Wear Properties of Nitrile Butadiene Rubber

Study on the aging of three typical rubber materials under high- and low-temperature cyclic environment

Aging Characteristics of SBS-Modified Asphalt under Thermo-Photo-Oxygen Coupling Conditions

The Effect of Aging Process Conditions on the Thermal Properties of Poly(Dimethylsiloxane)-Based Silicone Rubber

Constitutive Model for Thermal-Oxygen-Aged EPDM Rubber Based on the Arrhenius Law