Abstract:Abstract Water hammer is oscillatory pressure behavior in a wellbore resulting from the inertial effect of flowing fluid being subjected to an abrupt change in velocity. It is commonly observed at the end of large-scale hydraulic fracturing treatments after fluid injection rate is rapidly reduced or terminated. In this paper, factors affecting treatment-related water hammer behavior are disclosed, and field studies are introduced correlating water hammer characteristics to fracture intensity and well productivity. A simulator based on fundamental fluid-mechanics concepts was developed to model water hammer responses for various wellbore configurations and treatment characteristics. Insight from the modeling work was used to develop an optimal process of terminating fluid injection to obtain a consistent, identifiable oscillatory response for evaluating water hammer periodicity, decay rate, and oscillatory patterns. A completion database was engaged in a semi-automated process to evaluate numerous treatments. A data screening method was developed and implemented for enhancing interpretation reliability. Derived water hammer components were correlated to fracture intensity, well productivity and in certain cases, loss of treatment confinement to the intended treatment interval. Using the above process, thousands of hydraulic fracturing treatments were evaluated, and the results of that work are included in this study. The treatments were performed in wells based in Texas, South America, and Canada and completed in low permeability and unconventional reservoirs. The water hammer decay rate was determined to be a reliable indication of the system friction (friction in the wellbore and hydraulic fracture network) that drains energy from the water hammer pulse. In unconventional reservoirs characterized by small differences in the minimum and maximum horizontal stresses, high system friction correlated positively with fracture intensity/complexity and well performance. Results were constrained with instantaneous shut-in pressure (ISIP) and pressure falloff measurements to identify instances of direct communication with previously treated offset wellbores. The resulting analyses provided: – identification of enhanced-permeability intervals – indications of hydraulic fracture geometry – assessment of treatment modifications intended to enhance fracture complexity – identification of loss of treatment confinement to the intended interval – location of associated points of failure in the wellbore Topics covered in the paper include: Introduction Joukowsky Equation Period and Boundary Conditions Review of Prior Work on Water Hammer Analysis Shut-In Pressure Data, Analysis, and Model Data collection frequency Data issues and requirements Water Hammer Analytical Method Water Hammer Model Effects on Water hammer signature Fluid properties Step-down rate change and duration Perforation friction Applications Identification of Boundary Condition Identification of Treatment Stage Isolation Identification of Casing Failure Depth Identification of Excess Period (Excess Length) Case Study – Water Hammer Data in an Unconventional Reservoir Interpretation of frac geometry and friction in the fracture Relationship to well productivity

Pressure-Transient Behavior of Vertical Wells Considering Dynamic Water Hammer and Dynamic Induced Fracture: Theory and Case Studies

Transient Pressure Performance Analysis of Hydraulically Fractured Horizontal Well in Tight Oil Reservoir

Pressure transient analysis of a vertical well with multiple etched fractures in carbonate reservoirs

Transient Pressure Analysis of Volume-Fractured Horizontal Wells Considering Complex Fracture Networks and Stress Sensitivity in Tight Reservoirs

Numerical Simulation of Fracture Propagation Induced by Water Injection in Tight Oil Reservoirs

Numerical Investigation of Injection-Induced Fracture Propagation in Brittle Rocks with Two Injection Wells by a Modified Fluid-Mechanical Coupling Model

Investigation of the Hydraulic Properties of Deep Fractured Rocks Around Underground Excavations Using High-Pressure Injection Tests

Dynamic Pressure Analysis of Shale Gas Wells Considering Three-Dimensional Distribution and Properties of the Hydraulic Fracture Network

Mechanics of Hydraulic-Fracture Growth from a Wellbore Intersecting Natural Fractures

3D numerical analysis of stability and onset of hydraulic fracture in the vertical‐oblique‐horizontal wells under wide range of in situ stresses

Integrated workflow of temperature transient analysis and pressure transient analysis for multistage fractured horizontal wells in tight oil reservoirs

Physical Simulation Experiments of Hydraulic Fracture Initiation and Propagation under the Influence of Deep Shale Natural Fractures

Pressure transient analysis of a fractured well in multi-region linear composite reservoirs

Mechanics of Hydraulic Fracture Growth from a Borehole

A semi‐analytical model for capturing dynamic behavior of hydraulic fractures during flowback period in tight oil reservoir

Research on Fluid–Solid Coupling Mechanism around Openhole Wellbore under Transient Seepage Conditions

Identification of Fracture Extension Modes During Hydraulic Fracturing in Coalbed Methane Vertical Wells: A Case Study From the Southern Shizhuang Area of the Qinshui Basin, China

Transient Pressure Analysis of a Multiple Fractured Well in a Stress-Sensitive Coal Seam Gas Reservoir

Production Dynamic Characteristic of Fractured Wells in Multilayer Reservoirs Considering the Effect of Non-Uniform Flux Distribution

Practical Applications of Water Hammer Analysis from Hydraulic Fracturing Treatments

Modeling of Injection Induced Seismic Events