Effectiveness of creatine monohydrate in mitochondrial encephalomyopathies.

Kiyomi Komura,E. Hobbiebrunken,E. Wilichowski,F. Hanefeld

DOI: https://doi.org/10.1016/S0887-8994(02)00469-1

IF: 4.21

Pediatric Neurology

Abstract:

What problem does this paper attempt to address?

Screening Perovskites from ABO 3 Combinations Generated by Constraint Satisfaction Techniques Using Machine Learning

Jie Zhao,Xiaoyan Wang

DOI: https://doi.org/10.1021/acsomega.2c00002

IF: 4.1

2022-03-16

ACS Omega

Abstract:Perovskite oxides are attractive candidates for various scientific applications because of their outstanding structure flexibilities and attractive physical and chemical properties. However, labor-intensive and high-cost experimental and density functional theory calculation approaches are normally used to screen candidate perovskites. Herein, a machine learning method is employed to identify perovskites from ABO3 combinations formulated as constraint satisfaction problems based on the restrictions of charge neutrality and Goldschmidt tolerance factor. By eliminating five features based on their correlation and importance, 16 features refined from 21 features are employed to describe 343 known ABO3 compounds for perovskite formability and stability model training. It is found that the top three features for predicting formability are structural features of the A–O bond length, tolerance, and octahedral factors, whereas the top nine features for predicting the stability are elemental and structural features related to the B-site elements. The precision and recall of the two models are 0.983, 1.00 and 0.971, 0.943, respectively. The formability prediction model categorizes 2229 ABO3 combinations into 1373 perovskites and 856 nonperovskites, whereas the stability prediction model distinguishes 430 stable perovskites from 1799 unstable ones. Three hundred thirty-eight combinations are recognized as both formable and stable perovskites for future investigation.This article has not yet been cited by other publications.

chemistry, multidisciplinary
A Domain Knowledge Enhanced Machine Learning Method to Predict the Properties of Halide Double Perovskite A2B+B3+X6

Xiao Wei,Yunong Zhang,Xi Liu,Junjie Peng,Shengzhou Li,Renchao Che,Huiran Zhang

DOI: https://doi.org/10.1039/d3ta03600f

IF: 11.9

2023-01-01

Journal of Materials Chemistry A

Abstract:The heat of formation and band gap are important properties of halide double perovskites, which can dictate the range of application. However, traditional laborious experiments and density functional theory (DFT) calculations are time-consuming, and machine learning methods perform poorly in acquiring hidden knowledge from material samples, which make it difficult to explore promising perovskites with high stability efficiently. Here, we present a new machine learning framework, which could embed material domain knowledge into a machine learning method, and then it is used to predict the heat of formation and band gap. Compared with traditional machine learning methods, we found that the prediction accuracy of the heat of formation and band gap in 540 perovskite materials A(2)B(+)B(3+)X(6) is improved by 5.65% and 15.52% (namely 93.58% and 62.65%) respectively. It is shown that material domain knowledge contains a wealth of logical rules and expert experience, which can remedy most of the problems in data-driven materials research, such as data sparse and complex relationships between features.
Predicting the formation and stability of oxide perovskites by extracting underlying mechanisms using machine learning

George Stephen Thoppil,Alankar Alankar

DOI: https://doi.org/10.1016/j.commatsci.2022.111506

IF: 3.572

2022-08-01

Computational Materials Science

Abstract:The optimization of properties of perovskite oxides has drawn interest on account of their diverse areas of application. In this work, the hierarchical clustering technique is used to reduce the multi-collinearity among selected features from literature that are reported to have an effect on perovskite formation and stability. Operating on the vast composition space of double oxide perovskite compositions available in literature and online repositories, in this manuscript, an attempt has been made to extract the relationship between the composition and structure to predict their formability and stability. Machine learning (ML) classifiers are trained on these datasets to predict novel stable perovskite compositions. The study uses a vast feature space to narrow down the most important factors affecting the formability and stability in perovskite compounds. It also identifies stable compositions that have band gaps suitable for photovoltaic and photocatalytic applications. The developed random forest (RF)-based models may be extended to include the implications beyond photosensitive applications by focusing on the physico–chemical mechanisms driving the phenomena behind each application.

materials science, multidisciplinary
Machine learning for imbalanced datasets: Application in prediction of 3d-5d double perovskite structures

Wendi Zheng,Hao Cheng,Yiren Liu,Lan Chen,Yandong Guo,Yurong Yang,X.H. Yan,Di Wu

DOI: https://doi.org/10.1016/j.commatsci.2022.111394

IF: 3.572

2022-06-01

Computational Materials Science

Abstract:3d-5d double perovskite is one kind of the most promising materials due to its novel properties and excellent performance with strong spin-orbit coupling. We used machine learning (ML) to search new 3d-5d perovskites. Three new methods derived from rescaling strategy in training models are used to solve the imbalanced problem which is more effective and more accurate than conventional machine learning models. Out of 664 scanned candidates of A2BB'O6 double perovskite (A is nonmagnetic metal, B and B' are 3d and 5d transition metals, respectively), we find 166 compounds can be stable 3d-5d double-perovskite structures, where A cations have to be +3 or +2 changed. Our results may throw light on the development of perovskite-based devices with strong spin-orbital couplings.

materials science, multidisciplinary
A Machine Learning‐Assisted Approach to a Rapid and Reliable Screening for Mechanically Stable Perovskite‐Based Materials

Russlan Jaafreh,Abhishek Sharan,Muhammad Sajjad,Nirpendra Singh,Kotiba Hamad

DOI: https://doi.org/10.1002/adfm.202210374

IF: 19

2022-11-06

Advanced Functional Materials

Abstract:The question whether artificial intelligence can help us in accelerating the process of discovery of mechanically stable perovskite‐based materials is now a step closer to being answered. This work demonstrates a methodology in incorporating machine learning with chemical heuristics in perovskite material design in order to hunt for highly mechanically‐stable perovskite‐based materials. The present work is designed to discover new perovskite‐based materials, which are expected to show high mechanical stability during their applications, using machine learning (ML) techniques, and based on the Pugh's criterion for distinguishing brittle and ductile behaviors. For this purpose, ML models to predict the moduli of materials, bulk (B) and shear (G), are built using their crystal structure and composition information. The ML process is initiated with the information of 5663 compounds, including composition, crystal structure and moduli, as listed in AFLOW database. Following a procedure of data characteristics, feature generation, feature processing, training, and testing, the ML models are constructed with acceptable accuracy (tenfold cross‐validation R2 score of 0.90 and 0.89 for B and G, respectively). The validation process of the models, which is conducted using the corresponding density functional theory calculations, reveals that these models are reliable to be employed in a large‐scale screening process. Indeed, the B‐ and G‐based ML models are incorporated in a screening process, and this is also conjugated with other screening criterions, to find out thermodynamically stable and formable perovskite‐based materials with improved mechanical performance.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Exploring structure-composition relationships of cubic perovskite oxides via extreme feature engineering and automated machine learning

Qin Deng,Bin Lin

DOI: https://doi.org/10.1016/j.mtcomm.2021.102590

IF: 3.8

2021-09-01

Materials Today Communications

Abstract:In materials discovery, it is key to explore the structure-composition relationships and machine learning can be used as an effective tool. However, the complexity of conventional machine-learning and the lack of model interpretability make it difficult to derive simple descriptive formulas. Herein, we propose a new method to integrate extreme feature engineering and automated machine learning for exploring structure-composition relationships. Cubic perovskite oxides have attracted huge attention because of their excellent electrical-catalytic properties for electrocatalysts and fuel cells, exhibiting a universal formula of ABO3 with matching ionic sizes of A-site and B-site cations. The lattice constant is the only fundamental parameter of cubic crystal structure. In this work, we explore the structure-composition relationships between lattice constant and ionic radius of cubic perovskite oxides. Extreme feature engineering is applied to construct new descriptors and an important subset containing nine descriptors is obtained by recursive feature elimination. The optimal descriptor <math>ln(1+rB)</math> is found and the expression <math>a=2.2527ln(1+rB)+2.8181</math> for the lattice constant a is obtained by linear regression algorithm, only related with B-site ionic radii. Thus, the influence of B-site ionic radii on the lattice constants is much more significant than others. The results indicate that the new method contributes to explore structure-composition relationships without a priori knowledge, accelerates materials design and optimization, and provides a new approach for materials discovery.

materials science, multidisciplinary
Machine Learning Design of Perovskite Catalytic Properties

Ryan Jacobs,Jian Liu,Harry Abernathy,Dane Morgan

2023-11-03

Abstract:Discovering new materials that efficiently catalyze the oxygen reduction and evolution reactions is critical for facilitating the widespread adoption of solid oxide fuel cell and electrolyzer (SOFC/SOEC) technologies. Here, we develop machine learning (ML) models to predict perovskite catalytic properties critical for SOFC/SOEC applications, including oxygen surface exchange, oxygen diffusivity, and area specific resistance (ASR). The models are based on trivial-to-calculate elemental features and are more accurate and dramatically faster than the best models based on ab initio-derived features, potentially eliminating the need for ab initio calculations in descriptor-based screening. Our model of ASR enables temperature-dependent predictions, has well calibrated uncertainty estimates and online accessibility. Use of temporal cross-validation reveals our model to be effective at discovering new promising materials prior to their initial discovery, demonstrating our model can make meaningful predictions. Using the SHapley Additive ExPlanations (SHAP) approach, we provide detailed discussion of different approaches of model featurization for ML property prediction. Finally, we use our model to screen more than 19 million perovskites to develop a list of promising cheap, earth-abundant, stable, and high performing materials, and find some top materials contain mixtures of less-explored elements (e.g., K, Bi, Y, Ni, Cu) worth exploring in more detail.

Materials Science
Machine learning--based discovery of novel oxide and halide perovskites for energy storage

Neelesh Gupta,Ravi Kumar,Alankar Alankar

DOI: https://doi.org/10.1016/j.jallcom.2024.177470

IF: 6.2

2024-11-24

Journal of Alloys and Compounds

Abstract:In this study, the novel oxide and halide perovskite compounds in the form of single and double perovskite are explored by using machine learning, density functional theory databases, and experimental databases. The important features that define the formability and stability of oxide perovskite and halide perovskite compounds are extracted. Using these datasets as training datasets, very precise machine learning classification models are prepared using random forest classifiers for formability and stability. Subsequently, these results are cross-validated to screen the potential novel compounds. Further, the hierarchical clustering technique is used to understand the effect of multi-collinearity among selected features and also to analyze their effect on perovskite formability and stability. Our machine learning model predicts 591 novel perovskite compounds which are formable as well as stable. Further, the charge capacity of these novel compounds is also analyzed for battery applications.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Stability Engineering of Halide Perovskite via Machine Learning

Zhenzhu Li,Qichen Xu,Qingde Sun,Zhufeng Hou,Wan-Jian Yin

DOI: https://doi.org/10.48550/arXiv.1803.06042

2018-03-16

Materials Science

Abstract:Perovskite stability is of the core importance and difficulty in current research and application of perovskite solar cells. Nevertheless, over the past century, the formability and stability of perovskite still relied on simplified factor based on human knowledge, such as the commonly used tolerance factor t. Combining machine learning (ML) with first-principles density functional calculations, we proposed a strategy to firstly calculate the decomposition energies, considered to be closely related to thermodynamic stability, of 354 kinds halide perovskites, establish the machine learning relationship between decomposition energy and compositional ionic radius and investigate the stabilities of 14,190 halide double perovskites. The ML-predicted results enable us to rediscover a series of stable rare earth metal halide perovskites (up to ~1000 kinds), indicating the generalization of this model and further provide elemental and concentration suggestion for improving the stability of mixed perovskite.
Highly versatile and accurate machine learning methods for predicting perovskite properties

Ziming Chen,Jing Wang,Canjie Li,Baiquan Liu,Dongxiang Luo,Yonggang Min,Nianqing Fu,Qifan Xue

DOI: https://doi.org/10.1039/d4tc02268h

IF: 6.4

2024-07-13

Journal of Materials Chemistry C

Abstract:The determination of band gaps in unidentified materials holds substantial importance for photovoltaic applications. This research employs machine learning techniques to predict the band gap of perovskite materials within an acceptable margin of error. We developed a model to predict the band gaps of inorganic perovskites using machine learning algorithms. Our methodology utilizes a comprehensive dataset of 3720 ABX3-type perovskites and 2660 A2B(I)B(II)X6-type double perovskites, encompassing key properties such as band gap and formation energy. The features include nearly 300 descriptors generated by Matminer python. We applied six machine learning models, including XGBoost. The most effective model, XGBoost, demonstrated a notable R2 coefficient of 0.873 and a root mean square error (RMSE) of 0.5868 eV. Lastly, we conducted a SHAP (SHapley Additive exPlanation) analysis to identify the most influential descriptors. The findings indicate that a higher formation energy, a significant proportion of transition metals, and a large number of d orbital valence electrons contribute to the formation of narrow bandgap perovskites. Conversely, a substantial number of f-orbital electrons and electronegativity differences between elements tend to result in wide-bandgap perovskites. This comprehensive analysis not only offers insights into the fundamental factors influencing the band gap of perovskite materials but also underscores the potential of machine learning in expediting materials research.

materials science, multidisciplinary,physics, applied
Interpretable Machine Learning to Discover Perovskites with High Spontaneous Polarization

Yibo Sun,Xinming Wang,Cong Hou,Jun Ni

DOI: https://doi.org/10.1021/acs.jpcc.3c05742

2023-01-01

Abstract:Machine learning can accelerate the design of new materials by screening large quantities of materials. We investigated the spontaneous polarization intensity of inorganic perovskite ferroelectrics using a machine learning approach. The machine learning model covers the entire structure type of perovskite ferroelectrics. We make a large number of predictions for perovskite materials based on our model and screen 20 perovskite materials that have high spontaneous polarization intensity. We employ the SHAP (Shapley additive explanations) technique to qualitatively explain the machine learning model's correctness from a physical point of view. The results show that the larger the average atomic radius and the smaller the electronegativity of the metal atoms of the perovskite, the easier it is to find greater spontaneous polarization intensity. We also screen and verify the reasonableness of descriptors based on the model interpretation to improve the reliability of the model. By utilizing an interpretable machine learning approach, we can predict and optimize the properties of ferroelectrics, which facilitates the evaluation and application of materials.
Machine Learning for Halide Perovskite Materials ABX3 (B = Pb, X = I, Br, Cl) Assessment of Structural Properties and Band Gap Engineering for Solar Energy

Afnan Alhashmi,Mohammed Benali Kanoun,Souraya Goumri-Said

DOI: https://doi.org/10.3390/ma16072657

IF: 3.4

2023-03-28

Materials

Abstract:The exact control of material properties essential for solar applications has been made possible because of perovskites' compositional engineering. However, tackling efficiency, stability, and toxicity at the same time is still a difficulty. Mixed lead-free and inorganic perovskites have lately shown promise in addressing these problems, but their composition space is vast, making it challenging to find good candidates even with high-throughput approaches. We investigated two groups of halide perovskite compound data with the ABX3 formula to investigate the formation energy data for 81 compounds. The structural stability was analyzed over 63 compounds. For these perovskites, we used new library data extracted from a calculation using generalized-gradient approximation within the Perdew–Burke–Ernzerhof (PBE) functional established on density functional theory. As a second step, we built machine learning models, based on a kernel-based naive Bayes algorithm that anticipate a variety of target characteristics, including the mixing enthalpy, different octahedral distortions, and band gap calculations. In addition to laying the groundwork for observing new perovskites that go beyond currently available technical uses, this work creates a framework for finding and optimizing perovskites in a photovoltaic application.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Improved Physics-Based Structural Descriptors of Perovskite Materials Enable Higher Accuracy of Machine Learning

Changjiao Li,Hua Hao,Ben Xu,Zhonghui Shen,Enhao Zhou,Dongbing Jiang,Hanxing Liu

DOI: https://doi.org/10.1016/j.commatsci.2021.110714

IF: 3.572

2021-01-01

Computational Materials Science

Abstract:With the rapid development of computational materials science and databases, machine learning methods have achieved remarkable achievements in predicting the basic performance of perovskite materials. However, due to the unique structural diversity and compositional flexibility of perovskites, it remains a challenge to construct a comprehensive feature set containing structural characteristics, which limits the prediction accuracy of machine learning and may miss some underlying physical information. In this work, a comprehensive feature set of perovskites was established based on chemical composition and physical structure. Here, five descriptors with explicit physical meaning were proposed as features to describe the structural characteristics: ionic-radii calculated tolerance factor (tIR), bond valence vector sum (BVVS), discrepancy factor (Di), global instability index (GII), and bond valence based tolerance factor (tBV). Then, the band gap (Eg) was taken as an example to test the feature set by Support Vector Regression (SVR), Random Forest Regression (RF), Bagging Regression (bagging), and Gradient Boosting Regression (GBR). Compared with the model using element information as descriptors, the prediction accuracy of the model with structural features was significantly improved (the R2 values of SVR, RF, bagging and GBR were increased by 0.0891, 0.1078, 0.1076 and 0.134, respectively). This indicates that these physical descriptors can effectively quantify the structural characteristics of perovskites, and therefore can be extended to various studies on the complex relationship between component-structureperformance of perovskites.
Accelerated Design for Perovskite-Oxide-Based Photocatalysts Using Machine Learning Techniques

Xiuyun Zhai,Mingtong Chen

DOI: https://doi.org/10.3390/ma17123026

IF: 3.4

2024-06-21

Materials

Abstract:The rapid discovery of photocatalysts with desired performance among tens of thousands of potential perovskites represents a significant advancement. To expedite the design of perovskite-oxide-based photocatalysts, we developed a model of ABO3-type perovskites using machine learning methods based on atomic and experimental parameters. This model can be used to predict specific surface area (SSA), a key parameter closely associated with photocatalytic activity. The model construction involved several steps, including data collection, feature selection, model construction, web-service development, virtual screening and mechanism elucidation. Statistical analysis revealed that the support vector regression model achieved a correlation coefficient of 0.9462 for the training set and 0.8786 for the leave-one-out cross-validation. The potential perovskites with higher SSA than the highest SSA observed in the existing dataset were identified using the model and our computation platform. We also developed a webserver of the model, freely accessible to users. The methodologies outlined in this study not only facilitate the discovery of new perovskites but also enable exploration of the correlations between the perovskite properties and the physicochemical features. These findings provide valuable insights for further research and applications of perovskites using machine learning techniques.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Machine Learning-Enhanced Design of Lead-Free Halide Perovskite Materials Using Density Functional Theory

Upendra Kumar,Hyeon Woo Kim,Gyanendra Kumar Maurya,Bincy Babu Raj,Sobhit Singh,Ajay Kumar Kushwaha,Sung Beom Cho,Hyunseok Ko

DOI: https://doi.org/10.48550/arxiv.2407.15573

2024-07-22

Materials Science

Abstract:The investigation of emerging non-toxic perovskite materials has been undertaken to advance the fabrication of environmentally sustainable lead-free perovskite solar cells. This study introduces a machine learning methodology aimed at predicting innovative halide perovskite materials that hold promise for use in photovoltaic applications. The seven newly predicted materials are as follows: CsMnCl$_4$, Rb$_3$Mn$_2$Cl$_9$, Rb$_4$MnCl$_6$, Rb$_3$MnCl$_5$, RbMn$_2$Cl$_7$, RbMn$_4$Cl$_9$, and CsIn$_2$Cl$_7$. The predicted compounds are first screened using a machine learning approach, and their validity is subsequently verified through density functional theory calculations. CsMnCl$_4$ is notable among them, displaying a bandgap of 1.37 eV, falling within the Shockley-Queisser limit, making it suitable for photovoltaic applications. Through the integration of machine learning and density functional theory, this study presents a methodology that is more effective and thorough for the discovery and design of materials.
Data-driven analysis of the electronic-structure factors controlling the work functions of perovskite oxides

Yihuang Xiong,Weinan Chen,Wenbo Guo,Hua Wei,Ismaila Dabo

DOI: https://doi.org/10.48550/arXiv.2102.07320

2021-02-15

Materials Science

Abstract:Tuning the work functions of materials is of practical interest for maximizing the performance of microelectronic and (photo)electrochemical devices, as the efficiency of these systems depends on the ability to control electronic levels at surfaces and across interfaces. Perovskites are promising compounds to achieve such control. In this work, we examine the work functions of more than 1,000 perovskite oxide surfaces (ABO$_3$) by data-driven (machine-learning) analysis and identify the factors that determine their magnitude. While the work functions of BO$_2$-terminated surfaces are sensitive to the energy of the hybridized oxygen p bands, the work functions of AO-terminated surfaces exhibit a much less trivial dependence with respect to the filling of the d bands of the B-site atom and of its electronic affinity. This study shows the utility of interpretable data-driven models in analyzing the work functions of cubic perovskites from a limited number of electronic-structure descriptors.
Predicting the thermodynamic stability of perovskite oxides using machine learning models

Wei Li,Ryan Jacobs,Dane Morgan

DOI: https://doi.org/10.1016/j.commatsci.2018.04.033

2018-06-04

Abstract:Perovskite materials have become ubiquitous in many technologically relevant applications, ranging from catalysts in solid oxide fuel cells to light absorbing layers in solar photovoltaics. The thermodynamic phase stability is a key parameter that broadly governs whether the material is expected to be synthesizable, and whether it may degrade under certain operating conditions. Phase stability can be calculated using Density Functional Theory (DFT), but the significant computational cost makes such calculation potentially prohibitive when screening large numbers of possible compounds. In this work, we developed machine learning models to predict the thermodynamic phase stability of perovskite oxides using a dataset of more than 1900 DFT-calculated perovskite oxide energies. The phase stability was determined using convex hull analysis, with the energy above the convex hull (Ehull) providing a direct measure of the stability. We generated a set of 791 features based on elemental property data to correlate with the Ehull value of each perovskite compound. For classification, the extra trees algorithm achieved the best prediction accuracy of 0.93 (+/- 0.02), with an F1 score of 0.88 (+/- 0.03). For regression, leave-out 20% cross-validation tests with kernel ridge regression achieved the minimal root mean square error (RMSE) of 28.5 (+/- 7.5) meV/atom between cross-validation predicted Ehull values and DFT calculations, with the mean absolute error (MAE) in cross-validation energies of 16.7 (+/- 2.3) meV/atom. We further validated our model by predicting the stability of compounds not present in the training set and demonstrated our machine learning models are a fast and effective means of obtaining qualitatively useful guidance for a wide-range of perovskite oxide stability, potentially impacting materials design choices in a variety of technological applications.

Materials Science
Accelerated design and discovery of perovskites with high conductivity for energy applications through machine learning

Pikee Priya,N. R. Aluru

DOI: https://doi.org/10.1038/s41524-021-00551-3

IF: 12.256

2021-06-10

npj Computational Materials

Abstract:Abstract We use machine learning tools for the design and discovery of ABO 3 -type perovskite oxides for various energy applications, using over 7000 data points from the literature. We demonstrate a robust learning framework for efficient and accurate prediction of total conductivity of perovskites and their classification based on the type of charge carrier at different conditions of temperature and environment. After evaluating a set of >100 features, we identify average ionic radius, minimum electronegativity, minimum atomic mass, minimum formation energy of oxides for all B-site, and B-site dopant ions of the perovskite as the crucial and relevant predictors for determining conductivity and the type of charge carriers. The models are validated by predicting the conductivity of compounds absent in the training set. We screen 1793 undoped and 95,832 A-site and B-site doped perovskites to report the perovskites with high conductivities, which can be used for different energy applications, depending on the type of the charge carriers.

materials science, multidisciplinary,chemistry, physical
Machine learning for halide perovskite materials

Lei Zhang,Mu He,Shaofeng Shao

DOI: https://doi.org/10.1016/j.nanoen.2020.105380

IF: 17.6

2020-12-01

Nano Energy

Abstract:Halide perovskite materials serve as excellent candidates for solar cell and optoelectronic devices. Recently, the design of the halide perovskite materials is greatly facilitated by machine learning techniques, which effectively identify suitable halide perovskite candidates and unveil hidden relationships by algorithms that mimic the human cognitive functions. In this manuscript, we review recent progresses on the machine learning studies of the halide perovskite materials, including the prediction and understanding of lead-free and stable halide perovskite materials. The structural descriptors to describe the property and performance of the halide perovskite materials are discussed. In addition, the design strategy of the additive species for the halide perovskite materials via the machine learning technique is provided. Suggestions to further develop the halide perovskite-based systems via the machine learning methods in the future are provided.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology

Effectiveness of creatine monohydrate in mitochondrial encephalomyopathies.

Screening Perovskites from ABO 3 Combinations Generated by Constraint Satisfaction Techniques Using Machine Learning

A Domain Knowledge Enhanced Machine Learning Method to Predict the Properties of Halide Double Perovskite A2B+B3+X6

Predicting the formation and stability of oxide perovskites by extracting underlying mechanisms using machine learning

Machine learning for imbalanced datasets: Application in prediction of 3d-5d double perovskite structures

A Machine Learning‐Assisted Approach to a Rapid and Reliable Screening for Mechanically Stable Perovskite‐Based Materials

Exploring structure-composition relationships of cubic perovskite oxides via extreme feature engineering and automated machine learning

Machine Learning Design of Perovskite Catalytic Properties

Machine learning--based discovery of novel oxide and halide perovskites for energy storage

Stability Engineering of Halide Perovskite via Machine Learning

Highly versatile and accurate machine learning methods for predicting perovskite properties

Interpretable Machine Learning to Discover Perovskites with High Spontaneous Polarization

Machine Learning for Halide Perovskite Materials ABX3 (B = Pb, X = I, Br, Cl) Assessment of Structural Properties and Band Gap Engineering for Solar Energy

Improved Physics-Based Structural Descriptors of Perovskite Materials Enable Higher Accuracy of Machine Learning

Accelerated Design for Perovskite-Oxide-Based Photocatalysts Using Machine Learning Techniques

Machine Learning-Enhanced Design of Lead-Free Halide Perovskite Materials Using Density Functional Theory

Data-driven analysis of the electronic-structure factors controlling the work functions of perovskite oxides

Predicting the thermodynamic stability of perovskite oxides using machine learning models

Accelerated design and discovery of perovskites with high conductivity for energy applications through machine learning

Machine learning for halide perovskite materials