Anisotropic Elastic Constants Calculation of Stainless Steel Cladded Layers of Pressure Vessel Steel Plate
Ji Lin Xue,John Bouchard,Xue Dong Chen,Zhi Chao Fan,Yu Zhou
DOI: https://doi.org/10.4028/www.scientific.net/KEM.795.215
2019-10-07
Key Engineering Materials
Abstract:Cladding stainless steel layer on the inner surface of ferrite pressure vessel is a common method to improve the corrosion resistance and save the economic cost. However, the movement of heat source and temperature gradient in the process of cladded welding will lead to the anisotropy of cladded layer material. When measuring the residual stress of pressure vessel steel plate with stainless steel cladded layers by contour method, it is necessary to know the elastic mechanical properties of stainless steel cladded layers accurately. The assumption of transversely isotropy was employed, and the relationship between the material compliance matrix and the elastic modulus of transversely isotropic material was utilized. Based on the elastic modulus of each cladded layer and the whole steel plate from the longitudinal direction (0°) until the transverse direction (90°) measured by the experiment, the independent constants S11 , S13 , S33 and S44 in the compliance matrix of each cladded layer and the whole steel plate were obtained by regression analysis method. Furthermore, by using the relationship between the independent constants of the stiffness matrix of the transversely isotropic material and the single crystal material, the independent constants S12 in the compliance matrix of each stainless steel cladded layer and the whole steel plate were obtained. And then the independent constants of the stiffness matrix of each cladded layer and the whole steel plate were acquired. Hence, a method for calculating the anisotropic elastic constants of the stainless steel cladded layer and the whole steel plate was proposed. The results will provide material data support for measuring residual stress of pressure vessel steel plate with stainless steel cladded layers by contour method. Periodical: Main Theme: Edited by: Jian Ming Gong, Ming-Liang Zhu and Shan Tung Tu Pages: 215-222 DOI: https://doi.org/10.4028/www.scientific.net/KEM.795.215 Citation: J. L. Xue et al., "Anisotropic Elastic Constants Calculation of Stainless Steel Cladded Layers of Pressure Vessel Steel Plate", Key Engineering Materials, Vol. 795, pp. 215-222, 2019 Online since: March 2019 Authors: Keywords: Export: Price: 36,00 € Permissions: Request Permissions Share: * - Corresponding Author [1] J. Rebelo Kornmeier, W. M. Gan, M. J. Marques, A. C. Batista, M. Hofmann, A. Loureiro. Texture Characterization of Stainless Steel Cladded Layers of Process Vessels. Materials Science Forum. 879(2016), 1588-1593. DOI: https://doi.org/10.4028/www.scientific.net/msf.879.1588 [2] M. B. Prime, A. T. DeWald, The contour method, Chapter 5 in: G. S. Schajer (Eds.), Practical residual stress measurement methods, Wiley-Blackwell, (2013), pp.109-138. DOI: https://doi.org/10.1002/9781118402832.ch5 [3] G. Johnson, Residual stress measurements using the contour method. Ph.D. Dissertation, University of Manchester, UK (2008). [4] P.J. Bouchard. VORSAC WP2 Task 2.2.1- materials properties for AISI Type 316 stainless steels and Type 316L weld metal. Nuclear Electric Ltd. Gloucester, UK (1997). [5] W. Hermann, H.G. Sockel, J. Han, A. Bertram. Elastic properties and determination of elastic constants of nickel-base superalloys by a free-free beam technique. The Minerals, Metals & Materials Society, (1996), 229-238. DOI: https://doi.org/10.7449/1996/superalloys_1996_229_238 [6] D. Baral, J. E. Hilliard, J. B. Ketterson, K. Miyano. Determination of the primary elastic constants from thin foils having a strong texture. Journal of Applied Physics, 53(1982), 3552-3559. -Abstract Truncated-