Abstract:Introduction: Accumulation of plastic waste in the environment is a serious global issue. To deal with this, there is a need for improved and more efficient methods for plastic waste recycling. One approach is to depolymerize plastic using pyrolysis or chemical deconstruction followed by microbial-upcycling of the monomers into more valuable products. Microbial consortia may be able to increase stability in response to process perturbations and adapt to diverse carbon sources, but may be more likely to form biofilms that foul process equipment, increasing the challenge of harvesting the cell biomass. Methods: To better understand the relationship between bioprocess conditions, biofilm formation, and ecology within the bioreactor, in this study a previously-enriched microbial consortium (LS1_Calumet) was grown on (1) ammonium hydroxide-depolymerized polyethylene terephthalate (PET) monomers and (2) the pyrolysis products of polyethylene (PE) and polypropylene (PP). Bioreactor temperature, pH, agitation speed, and aeration were varied to determine the conditions that led to the highest production of planktonic biomass and minimal formation of biofilm. The community makeup and diversity in the planktonic and biofilm states were evaluated using 16S rRNA gene amplicon sequencing. Results: Results showed that there was very little microbial growth on the liquid product from pyrolysis under all fermentation conditions. When grown on the chemically-deconstructed PET the highest cell density (0.69 g/L) with minimal biofilm formation was produced at 30°C, pH 7, 100 rpm agitation, and 10 sL/hr airflow. Results from 16S rRNAsequencing showed that the planktonic phase had higher observed diversity than the biofilm, and that Rhodococcus, Paracoccus, and Chelatococcus were the most abundant genera for all process conditions. Biofilm formation by Rhodococcus sp. And Paracoccus sp. Isolates was typically lower than the full microbial community and varied based on the carbon source. Discussion: Ultimately, the results indicate that biofilm formation within the bioreactor can be significantly reduced by optimizing process conditions and using pure cultures or a less diverse community, while maintaining high biomass productivity. The results of this study provide insight into methods for upcycling plastic waste and how process conditions can be used to control the formation of biofilm in bioreactors.

Screening of common synthetic polymers for depolymerization by subcritical hydrothermal liquefaction

Hydrothermal co-liquefaction of synthetic polymers and Miscanthus Giganteus; synergistic and antagonistic effects

Hydrothermal liquefaction of diverse plastics using water and seawater

Hydrothermal Liquefaction of Plastics: a survey of the effect of reaction conditions on the reaction efficiency.

Recent advances in the production processes of hydrothermal liquefaction biocrude and aid-in investigation techniques

Efficient Low-Temperature catalytic depolymerization of LLDPE into valuable compounds using H-ZSM-5 catalysts and water

Hybrid Chemomechanical Plastics Recycling: Solvent-free, High-Speed Reactive Extrusion of Low-Density Polyethylene

Hydrogenolysis of Poly(Ethylene‐co‐Vinyl Alcohol) and Related Polymer Blends over Ruthenium Heterogeneous Catalysts

Preliminary Results showing Poor Potential of Thermo-catalytic Treatment towards Resource Recovery from Waste Biopolymers

Thermal and catalytic pyrolysis of a synthetic mixture representative of packaging plastics residue

Depolymerization of plastics by means of electrified spatiotemporal heating

Hydrogenolysis of Polypropylene and Mixed Polyolefin Plastic Waste over Ru/C to Produce Liquid Alkanes

Combined Hydrothermal Liquefaction of Polyurethane and Lignocellulosic Biomass for improved carbon recovery

Clean Enzymatic depolymerization of highly crystalline polyethylene terephthalate in moist-solid reaction mixtures

Hydrothermal Liquefaction of Polycarbonate (PC) Plastics in Sub-/Supercritical Water and Reaction Pathway Exploration

Screening the Efficacy of a Microbial Consortium of Bacteria and Fungi Isolated from Different Environmental Samples for the Degradation of LDPE/TPS Films

Thermal conversion of irradiated LLDPE waste into sustainable sponge-like compounds: a novel approach for efficient trace-level oil–water removal

Characterization and engineering of a two-enzyme system for plastics depolymerization

Hydrothermal Oxidation of Polyethylene (PE) Plastic to Short-chain Fatty Acids (C1 - C5)

Highly Efficient Depolymerization of Waste Polyesters Enabled by Transesterification/Hydrogenation Relay Under Mild Conditions

Biofilm mitigation in hybrid chemical-biological upcycling of waste polymers