Abstract:This article reviews the research and development focus of metallic glasses in the field of biomedical applications. Metallic glasses exhibit a short-range ordered and long-range disordered glassy structure at the microscopic level, devoid of structural defects such as dislocations and grain boundaries. Therefore, they possess advantages such as high strength, toughness, and corrosion resistance, combining characteristics of both metals and glasses. This novel alloy system has found applications in the field of biomedical materials due to its excellent comprehensive performance. This review discusses the applications of Ti-based bulk metallic glasses in load-bearing implants such as bone plates and screws for long-term implantation. On the other hand, Mg-based metallic glasses, owing to their degradability, are primarily used in degradable bone nails, plates, and vascular stents. However, metallic glasses as biomaterials still face certain challenges. The Young's modulus value of Ti-based metallic glasses is higher than that of human bones, leading to stress-shielding effects. Meanwhile, Mg-based metallic glasses degrade too quickly, resulting in the premature loss of mechanical properties and the formation of numerous bubbles, which hinder tissue healing. To address these issues, we propose the following development directions: (1) Introducing porous structures into titanium-based metallic glasses is an important research direction for reducing Young's modulus; (2) To enhance the bioactivity of implant material surfaces, the surface modification of titanium-based metallic glasses is essential. (3) Developing antibacterial coatings and incorporating antibacterial metal elements into the alloys is essential to maintain the long-term effective antibacterial properties of metallic biomaterials. (4) Corrosion resistance must be further improved through the preparation of composite materials, while ensuring biocompatibility and safety, to achieve controllable degradation rates and degradation modes.

In Situ Synchrotron X-Ray Diffraction Characterization of Corrosion Products of a Ti-Based Metallic Glass for Implant Applications

Electrochemical surface nanostructuring of Ti47Cu38Fe2.5Zr7.5Sn2Si1Ag2 metallic glass for improved pitting corrosion resistance

Acid Treatments of Ti-Based Metallic Glasses for Improving Corrosion Resistance in Implant Applications

In Vitro Cytocompatibility of a Zr-based Metallic Glass Modified by Laser Surface Texturing for Potential Implant Applications

Impact of Spherulite-Type Crystalline Defects on the Mechanical and Electrochemical Properties of TiCuZrPd Metallic Glasses

Enhanced mechanical properties and in vitro corrosion behavior of amorphous and devitrified Ti40Zr10Cu38Pd12 metallic glass

In Vitro And In Vivo Studies On Ti-Based Bulk Metallic Glass As Potential Dental Implant Material

Mechanical, corrosion, and wear performances of a biocompatible Ti-based glassy alloy

Ti–Zr–Si–Nb Nanocrystalline Alloys and Metallic Glasses: Assessment on the Structure, Thermal Stability, Corrosion and Mechanical Properties

Corrosion and in Vitro Cytocompatibility Investigation on the Designed Mg-Zn-Ag Metallic Glasses for Biomedical Application

Metallic glasses for biodegradable implants

The influence of porous structure on the corrosion behavior and biocompatibility of bulk Ti-based metallic glass

Corrosion fatigue behavior of porous Cu-bearing Ti alloy fabricated by selective laser melting

Cu-Zr-Al-Ti bulk metallic glass with enhanced glass-forming ability, mechanical properties, corrosion resistance and biocompatibility

Ti40Zr10Cu36Pd14 bulk metallic glass as oral implant material

Tailored Electrophoretic Coatings for Enhanced Corrosion Resistance of 316L Stainless Steel Implants using Bioactive Glasses

Corrosion Performances in Simulated Body Fluids and Cytotoxicity Evaluation of Fe-based Bulk Metallic Glasses

A Review of the Development of Titanium-Based and Magnesium-Based Metallic Glasses in the Field of Biomedical Materials

Surface nano-architectures and their effects on the mechanical properties and corrosion behavior of Ti-based orthopedic implants

Nanostructured Zr-Pd metallic glass thin film for biochemical applications.

Mechanical behavior and corrosion resistance of sol-gel derived 45S5 bioactive glass coating on Ti6Al4V synthesized by electrophoretic deposition