Abstract:The fault vibration signal of rolling bearing is typical non-stationary and non-linear signals. It usually exhibits the characteristics of amplitude modulation and frequency modulation (AM-FM) due to the interaction between the various components within the bearing and modulation of the rotor speed. In addition, the incipient weak fault feature information is inevitably masked by the strong background noise and other vibration interference because of the influence of the working environment of mechanical equipment. Therefore, new high efficiency and effective processing methods are indispensable for feature extraction of bearing fault diagnosis signals. Direct fast iterative filtering (dFIF) is a new kind of adaptive mode decomposition method proposed by Antonio Cicone based on iterative filtering (IF) and fast iterative filtering (FIF). dFIF is used to quickly decompose multi-component signals into a set of intrinsic mode functions (IMFs) by means of fast Fourier transform (FFT). In order to study the decomposition performance and examine the feature extraction ability of the dFIF method, a group of harmonic signals with simple linear superposition, multi-components AM-FM signals with different data length and different signal-to-noise ratio (SNR) are simulated and analyzed. For comparison, other mode decomposition methods were also applied to the simulated signals, such as adaptive local iterative filtering (ALIF), local mean decomposition (LMD), and empirical mode decomposition (EMD). The results show that dFIF decomposition methods have faster decomposition speed and better accuracy than other methods. Furthermore, the results also demonstrate excellent performance in AM-FM feature extraction and anti-mode mixing. On the other hand, the effective weighted sparseness kurtosis (EWSK) index integrates the periodicity and intensity of impact in each mode, which can effectively identify the effective mode. Therefore, considering the above merits, EWSK is integrated on the dFIF to effectively accomplish the fault diagnosis for rolling bearing under strong background noise. Firstly, the raw vibration signals of rolling bearing fault are decomposed into a set of IMFs by using dFIF. The EWSK indicator is then utilized to select IMFs with rich bearing fault impulse information for reconstruction. Finally, the Hilbert envelope demodulation analysis is used to analyze the reconstructed signal, extract the bearing fault feature and then judge the fault type. This proposed method is applied to analyze the simulated and field measured vibration signals of rolling bearing faults. Simultaneously, the other above-mentioned adaptive TFA methods are also adopted to analyze the signals. The results compared show that the proposed method has excellent performance in the aspects of decomposition speed and accuracy under the influence of strong background noise. It demonstrates the effectiveness and applicability of the proposed method for signal processing and fault pattern recognition of rolling bearings.

Optimized weights spectrum autocorrelation: A new and promising method for fault characteristic frequency identification for rotating Machine fault diagnosis

A New Procedure for Extracting Fault Feature of Multi-Frequency Signal from Rotating Machinery

Adaptive Fault Components Extraction by Using an Optimized Weights Spectrum Based Index for Machinery Fault Diagnosis.

A Periodic-Modulation-oriented Noise Resistant Correlation Method for Industrial Fault Diagnostics of Rotating Machinery under the Circumstances of Limited System Signal Availability

Combined Weighted Envelope Spectrum: an Enhanced Demodulation Framework for Extracting Characteristic Frequency of Rotating Machinery

Optimal Weighted Envelope Spectrum: An enhanced demodulation method for extracting specific characteristic frequency of rotating machinery

Fast Spectral Correlation Based on Sparse Representation Self-Learning Dictionary and Its Application in Fault Diagnosis of Rotating Machinery

An optimal demodulation frequency band selection method based on spectral coherence fault energy factor for rolling bearing fault diagnosis

Optimal Noise Subtraction based Fault Components Extraction for Machinery Fault Diagnosis

Interpretable online updated weights: Optimized square envelope spectrum for machine condition monitoring and fault diagnosis

Rotating machine fault diagnosis by a novel fast sparsity-enabled feature-energy-ratio method

Acoustic Feature Enhancement in Rolling Bearing Fault Diagnosis Using Sparsity-Oriented Multipoint Optimal Minimum Entropy Deconvolution Adjusted Method

Fast Spectral Correlation Detector for Periodic Impulse Extraction of Rotating Machinery

Robust Optimized Weights Spectrum: Enhanced Interpretable Fault Feature Extraction Method by Solving Frequency Fluctuation Problem

Fault Diagnosis of Wind Turbine Bearing Based on Optimized Adaptive Chirp Mode Decomposition

An improved spectrum correlation time-frequency analysis method and its application in fault diagnosis of rolling element bearing

Integrated early fault diagnosis method based on direct fast iterative filtering decomposition and effective weighted sparseness kurtosis to rolling bearings

Fault Signature Extraction of Rolling Bearings under Variable Speed Via Time–frequency Overlap Group Sparse Representation

Improved Spectral Kurtosis with Adaptive Redundant Multiwavelet Packet and Its Applications for Rotating Machinery Fault Detection

Oscillatory Time–frequency Concentration for Adaptive Bearing Fault Diagnosis under Nonstationary Time-Varying Speed

Time–frequency Analysis Based on Ensemble Local Mean Decomposition and Fast Kurtogram for Rotating Machinery Fault Diagnosis