Neoplastic properties of animal cell lines. Methods for determining neoplastic properties--discussion.

A. Sandberg

Abstract:

What problem does this paper attempt to address?

Designer Fibers from 2D to 3D – Simultaneous and Controlled Engineering of Morphology, Shape and Size

Zhi-Cheng Yao,Chunchen Zhang,Zeeshan Ahmad,Jie Huang,Jing-Song Li,Ming-Wei Chang

DOI: https://doi.org/10.1016/j.cej.2017.10.033

IF: 15.1

2018-01-01

Chemical Engineering Journal

Abstract:Topography and surface morphology of micrometer and nanometer scaled fibrous biomaterials are crucial for bioactive component encapsulation, release, promoting cell proliferation and interaction within biological environment. Specifically, for drug delivery and tissue repair applications, surface engineering provides control on both aspects in tandem. In this study, the bioactive component (ganoderma lucidum spore polysaccharide (GLSP)) was loaded into zein prolamine (ZP) fiber matrices via coaxial electrospinning (CES) technique. During the CES process, various outer layer enveloping fluids were used to modulate fiber topography in-situ (from 2D to 3D). SEM and water contact angle tests indicate enveloping media impact electrospun fiber diameter (ranging from 400 nm to 3.0 mu m) and morphologies (from flat ribbon-like to solid cylindrical structures), with the latter impacting GLSP release profile. Furthermore, CCK-8 assay assessment indicates fibroblast cell proliferation (L929 cell line), while cell extension was also observed for modified ZP fibers. The results demonstrate potential applications of modified fiber morphologies, which are tailored in-situ without impacting chemical stability and encapsulation.
Aqueous-Based Coaxial Electrospinning of Genetically Engineered Silk Elastin Core-Shell Nanofibers

Jingxin Zhu,Wenwen Huang,Qiang Zhang,Shengjie Ling,Ying Chen,David L. Kaplan

DOI: https://doi.org/10.3390/ma9040221

IF: 3.4

2016-01-01

Materials

Abstract:A nanofabrication method for the production of flexible core-shell structured silk elastin nanofibers is presented, based on an all-aqueous coaxial electrospinning process. In this process, silk fibroin (SF) and silk-elastin-like protein polymer (SELP), both in aqueous solution, with high and low viscosity, respectively, were used as the inner (core) and outer (shell) layers of the nanofibers. The electrospinnable SF core solution served as a spinning aid for the nonelectrospinnable SELP shell solution. Uniform nanofibers with average diameter from 301 ± 108 nm to 408 ± 150 nm were obtained through adjusting the processing parameters. The core-shell structures of the nanofibers were confirmed by fluorescence and electron microscopy. In order to modulate the mechanical properties and provide stability in water, the as-spun SF-SELP nanofiber mats were treated with methanol vapor to induce β-sheet physical crosslinks. FTIR confirmed the conversion of the secondary structure from a random coil to β-sheets after the methanol treatment. Tensile tests of SF-SELP core-shell structured nanofibers showed good flexibility with elongation at break of 5.20% ± 0.57%, compared with SF nanofibers with an elongation at break of 1.38% ± 0.22%. The SF-SELP core-shell structured nanofibers should provide useful options to explore in the field of biomaterials due to the improved flexibility of the fibrous mats and the presence of a dynamic SELP layer on the outer surface.
Biodegradable Fibrous Scaffolds Composed Of Gelatin Coated Poly(Epsilon-Caprolactone) Prepared By Coaxial Electrospinning

Pengcheng Zhao,Hongliang Jiang,Hui Pan,Kangjie Zhu,Weiliam Chen

DOI: https://doi.org/10.1002/jbm.a.31242

2007-01-01

Journal of Biomedical Materials Research Part A

Abstract:A facile coaxial electrospinning technique was devised to prepare biodegradable core-shell fibrous scaffolds with poly(epsilon-caprolactone) (PCL) comprising the core structure and gelatin forming the coating of the fibers. The effect of the feed rate of the inner dope on the electrospinning process and fiber morphology was investigated. The results indicated that core-shell fibers with narrow size distribution and smooth surface morphology could be obtained when the feed rate was below 8 mL/h. An increase of the feed rate resulted in analogous increase in the diameters of both the inner PCL fiber core and the entire core-shell fibers. XPS analyses revealed that the surface of the core-shell fibers was tainted with a small amount of PCL. The outer gelatin layer in the core-shell fibers was crosslinked with glutaraldehyde. By optimizing the glutaraldehyde/gelatin feed ratio, crosslinked scaffolds with high porosity were obtained. The mechanic strength of the hydrated, crosslinked core-shell fibrous scaffolds was significantly enhanced because of the presence of hydrophobic PCL in the core region of the fibers. Results of cell culture studies suggested that the crosslinked, core-shell fibrous scaffold were nontoxic and capable of supporting fibroblast adhesion and proliferation. (c) 2007 Wiley Periodicals, Inc.
Magnetic-Field-Assisted Emulsion Electrospinning System: Designing, Assembly, and Testing for the Production of PCL/Gelatin Core–Shell Nanofibers

Fatemeh Kashani-Asadi-Jafari,Ahmadreza Parhizgar,Afra Hadjizadeh

DOI: https://doi.org/10.1007/s12221-023-00111-0

IF: 2.5

2023-02-17

Fibers and Polymers

Abstract:There are different methods for producing core–shell nanofibers, one of which is the emulsion electrospinning method. The stability of the emulsion during electrospinning is one of the most critical factors in the quality of the fibers. In this study, a magnetic-field-assisted emulsion electrospinning system was designed, built, and tested to keep the emulsion stable without additives or sonication. Polycaprolactone (PCL) 10 wt. % in dichloromethane (DCM) for the shell and gelatin 2.5 wt. % in water for the core was used. Scanning electron microscope (SEM) image of samples with different weight ratios of components both with and without using the magnetic-field-assisted emulsion electrospinning system at different rotational speeds was investigated. Transition electron microscope (TEM) images of the sample with a ratio of 1/10 (gel/PCL) at different rotational speeds were studied. The fibers were finally analyzed by Fourier transform infrared (FTIR) and tensile strength machine. According to the results, there was no change in the bonds in the materials after electrospinning. The designed system improved the fiber texture and reduced its structural problems significantly. By increasing the rotation speed of the magnet from 700 to 900 rpm, an improvement in fiber morphology and uniformity in diameter was observed. The composition of gelatin/PCL with a ratio of 1/10 was selected as the optimal condition. The spun nanofibers in these conditions had a uniform structure without the bead, and the presence of both polymers uniformly in the fibers was shown. Finally, the magnetic-field-assisted emulsion electrospinning system successfully held the emulsion stable during electrospinning without additives.

materials science, textiles,polymer science
Modulation of Protein Release from Biodegradable Core-Shell Structured Fibers Prepared by Coaxial Electrospinning.

Hongliang Jiang,Yingqian Hu,Pengcheng Zhao,Yan Li,Kangjie Zhu

DOI: https://doi.org/10.1002/jbm.b.30510

2006-01-01

Abstract:Biodegradable core-shell structured fibers with poly(E-caprolactone) as shell and bovine serum albumin (BSA)-containing dextran as core were prepared by coaxial electro-spinning for incorporation and controlled release of proteins. BSA loading percent in the fibers and its release rate could be conveniently varied by the feed rate of the inner dope during electrospinning. With the increase in the feed rate of the inner dope, there was an associated increase in the loading percent and accelerated release of BSA. Poly(ethylene glycol) (PEG) was added to the shell section of the fibers to further finely modulate the release behavior of BSA. It was revealed that the release rate of BSA increased with the PEG percent in the shell section. By varying the feed rate of the inner dope and PEG content, most of BSA could be released from the core-shell structured fibers within the period of time ranging from I week to more than 1 month. The effect of the feed rate of the inner dope and addition of PEG into the shell section on the fiber morphology was also examined by scanning electron microscope. (c) 2006 Wiley Periodicals, Inc.
Fabrication and characterization of zein-based nanofibrous scaffolds by an electrospinning method.

Hongliang Jiang,Pengcheng Zhao,Kangjie Zhu

DOI: https://doi.org/10.1002/mabi.200600277

2007-01-01

Macromolecular Bioscience

Abstract:Electrospun zein membranes were prepared using DMF as solvent. By changing the solution concentration, the electrospinning voltage and the distance between the spinneret and collector, nanofibrous meshes without bead defects could be obtained. In order to improve the mechanical strength of the hydrated zein meshes, core-shell-structured nanofibrous membranes with PCL as the core material and zein forming the shell were prepared by coaxial electrospinning. The core-shell structure of the composite fibers was confirmed by SEM characterization of the fibers, either extracted with chloroform to remove the inner PCL, or elongated to expose their cross-section. The composition and average diameter of the composite fibers could be modulated by the feed rate of the inner PCL solution. It was found that the core-shell fibrous membranes have similar wettability to the electrospun zein mesh. The presence of PCL in the fibers could significantly improve the mechanical properties of the zein membrane.
Effect Of Fiber Structure On The Properties Of The Electrospun Hybrid Membranes Composed Of Poly(E-Caprolactone) And Gelatin

Zhengjian Chen,Lihua Cao,Liqun Wang,Huiyong Zhu,Hongliang Jiang

DOI: https://doi.org/10.1002/app.38000

IF: 3

2013-01-01

Journal of Applied Polymer Science

Abstract:To elucidate the effect of fiber structure on the properties of the electrospun gelatin/PCL hybrid membranes, three types of fibers with different structures, i.e., core-shell, blend, and mixed fibers were fabricated. The crystallinity, wettability, swelling degree, and mechanical properties of the hybrid membranes were compared. It was found that the crystalline characteristics of PCL in the core-shell fibers were different from the fibers fabricated by the other two methods. That is, the orientation degree of the PCL chains in the core-shell fibers was higher than that in both blend and mixed fibers. The wettability of the hybrid membrane was dependent on both the composition and structure of the electrospun fibers. Blended fibers exhibited the highest hydrophobicity because of the enrichment of PCL at the fiber surface. Contrarily, the mixed fibers possessed the highest mechanical strength of 35.18 MPa. (c) 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013
Interfacial blending in co-axially electrospun polymer core-shell fibers and their interaction with cells via focal adhesion point analysis

Martyna Polak,Daniel P Ura,Krzysztof Berniak,Piotr K Szewczyk,Mateusz M Marzec,Urszula Stachewicz,Daniel P. Ura,Piotr K. Szewczyk,Mateusz M. Marzec

DOI: https://doi.org/10.1016/j.colsurfb.2024.113864

IF: 5.999

2024-03-22

Colloids and Surfaces B Biointerfaces

Abstract:Electrospun polymer scaffolds have gained prominence in biomedical applications, including tissue engineering, drug delivery, and wound dressings, due to their customizable properties. As the interplay between cells and materials assumes fundamental significance in biomaterials research, understanding the relationship between fiber properties and cell behaviour is imperative. Nevertheless, altering fiber properties introduces complexity by intertwining mechanical and surface chemistry effects, challenging the differentiation of their individual impacts on cell behaviour. Core-shell fibers present an appealing solution, enabling the control of mechanical properties of scaffolds, flexibility in material and drug selection, efficient encapsulation, strong protection of bioactive drugs against harsh environments, and controlled, prolonged drug release. This study addresses a key challenge in core-shell fiber design related to the blending effect between core and shell polymers. Two types of fibers, PMMA and core-shell PC-PMMA, were electrospun, and thorough analyses confirmed the desired core-shell structure in PC-PMMA fibers. Surface chemistry analysis revealed PC diffusion to the PMMA shell of the core-shell fiber during electrospinning, subsequently prompting an investigation of the fiber's surface potential. Conducting cellular studies on osteoblasts by super-resolution confocal microscopy provided insights into the direct influence of interfacial polymer blending and, consequently, altered fiber surface and mechanical properties on cell focal adhesion points, bridging the gap between material attributes and cell responses in core-shell fibers.

materials science, biomaterials,biophysics,chemistry, physical
Coaxial Electrospinning and Characterization of Core-Shell Structured Cellulose Nanocrystal Reinforced PMMA/PAN Composite Fibers

Chao Li,Qingde Li,Xiaohui Ni,Guoxiang Liu,Wanli Cheng,Guangping Han

DOI: https://doi.org/10.3390/ma10060572

IF: 3.4

2017-05-24

Materials

Abstract:A modified coaxial electrospinning process was used to prepare composite nanofibrous mats from a poly(methyl methacrylate) (PMMA) solution with the addition of different cellulose nanocrystals (CNCs) as the sheath fluid and polyacrylonitrile (PAN) solution as the core fluid. This study investigated the conductivity of the as-spun solutions that increased significantly with increasing CNCs addition, which favors forming uniform fibers. This study discussed the effect of different CNCs addition on the morphology, thermal behavior, and the multilevel structure of the coaxial electrospun PMMA + CNCs/PAN composite nanofibers. A morphology analysis of the nanofibrous mats clearly demonstrated that the CNCs facilitated the production of the composite nanofibers with a core-shell structure. The diameter of the composite nanofibers decreased and the uniformity increased with increasing CNCs concentrations in the shell fluid. The composite nanofibrous mats had the maximum thermal decomposition temperature that was substantially higher than electrospun pure PMMA, PAN, as well as the core-shell PMMA/PAN nanocomposite. The BET (Brunauer, Emmett and Teller) formula results showed that the specific surface area of the CNCs reinforced core-shell composite significantly increased with increasing CNCs content. The specific surface area of the composite with 20% CNCs loading rose to 9.62 m2/g from 3.76 m2/g for the control. A dense porous structure was formed on the surface of the electrospun core-shell fibers.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Nanofibrous Mats of Rigid Polysaccharides Prepared by Coaxial Electrospinning

LIU Yi-jie,LI Yan,JIANG Hong-liang,HU Ying-qian,ZHU Kang-jie

DOI: https://doi.org/10.14133/j.cnki.1008-9357.2008.01.005

2008-01-01

Abstract:Nanofibrous membranes of rigid polysaccharides including chitosan,alginate or hyaluronic acid(HA) were obtained by coaxial electrospinning of their corresponding aqueous solutions(the inner dope) and PEO(M_n=6.0×10~5) solution in a DMF/H_2O admixture(the outer dope) and subsequent removal of the outer PEO shell.The fiber structure was characterized by TEM and SEM.It is found that core-shell fibers with PEO forming the shell and polysaccharide as the core material can be conveniently prepared by coaxial electrospinning.The PEO shell can be removed by extraction of the core-shell fibers with chloroform.Compared with the polysaccharide fibers prepared by regular uni-axial electrospinning, the fibers(obtained) by coaxial electrospinning display integrated structure after PEO treatment.
Processing-Mechanical Property Relationship of Hollow and Porous Carbon Fibers Fabricated by Coaxial Electrospinning

M. Naraghi,Jizhe Cai,Yijun Chen,J. Boyd

DOI: https://doi.org/10.1115/MSEC2018-6598

2018-06-18

Abstract:High strength hollow carbon fibers with both porous and solid shell were fabricated by a combination of coaxial electrospinning and emulsion electrospinning. In the coaxial electrospinning, a Polyacrylonitrile (PAN)/ Poly(methyl methacrylate) (PMMA)/Dimethylformamide (DMF) emulsion was used to form the porous shell and a PAN/DMF solution was used to form the solid shell. Fiber surface and cross-section morphology was studied by scanning electron microscope (SEM). Mechanical property of the hollow fibers was characterized by single fiber tensile test using microelectromechanical system devices (MEMS). The effect of pores on mechanical performance of the hollow fibers was studied. Hollow carbon fibers with porous and solid shell both showed a brittle fracture behavior. The modulus and strength of the hollow carbon fibers with solid shell was ∼ 76.1 GPa and 2.04 GPa, respectively. For the hollow carbon fibers with porous shell, the porosity led to ∼ 35 % reduction in strength. The porous fibers with the mediocre strength measured here open new horizons for combining structural functionality with energy storage, in so-called structural batteries.

Materials Science,Engineering
Formation Of Bead-Free And Core-Shell Superfine Electrospinning Fibers Under The Assistance Of Another Polymer And An Interfacial Compatibilizer

Yin Tang,Lian-Fang Feng,Xue-Ping Gu,Cai-Liang Zhang

DOI: https://doi.org/10.1002/pen.25130

2019-01-01

Abstract:This work presents a new way of preparing bead-free and core-shell superfine polymer electrospinning fibers under the assistance of another polymer and an interfacial compatibilizer. For the electrospinning of polystyrene (PS)/CHCl3 solution, the bead-free fiber cannot be obtained until the PS concentration is above 0.25 g/mL but its average diameter is above 10 mu m. Using polyamide 6 (PA6) as an additive, the critical concentration capable of forming bead-free fiber greatly decreased and core-shell fibers with PA6 as the core and PS as the shell were obtained due to the driving effect of high spinability of PA6. The introduction of a copolymer (PS-co-TMI) of styrene (St) and 3-isopropenyl-alpha,alpha-dimethylbenzene isocyanate (TMI) can react with amine of PA6 to form the copolymer of PS and PA6 as an interfacial compatibilizer. As a result, it can further enhance the dispersion and deformation of minor component PA6 into uniform microfiber core, and drive PS to uniformly cover the surface of PA6 fibers, and finally form bead-free and core-shell superfine fibers. POLYM. ENG. SCI., 59:1437-1444 2019. (c) 2019 Society of Plastics Engineers
Design of Collagen and Gelatin-based Electrospun Fibers for Biomedical Purposes: An Overview

Laura Larue,Laurent Michely,Daniel Grande,Sabrina Belbekhouche

DOI: https://doi.org/10.1021/acsbiomaterials.4c00948

2024-08-02

Abstract:Collagen and gelatin are essential natural biopolymers commonly utilized in biomaterials and tissue engineering because of their excellent physicochemical and biocompatibility properties. They can be used either in combination with other biomacromolecules or particles or even exclusively for the enhancement of bone regeneration or for the development of biomimetic scaffolds. Collagen or gelatin derivatives can be transformed into nanofibrous materials with porous micro- or nanostructures and superior mechanical properties and biocompatibility using electrospinning technology. Specific attention was recently paid to electrospun mats of such biopolymers, due to their high ratio of surface area to volume, as well as their biocompatibility, biodegradability, and low immunogenicity. The fiber mats with submicro- and nanometer scale can replicate the extracellular matrix structure of human tissues and organs, making them highly suitable for use in tissue engineering due to their exceptional bioaffinity. The drawbacks may include rapid degradation and complete dissolution in aqueous media. The use of gelatin/collagen electrospun nanofibers in this form is thus greatly restricted for biomedicine. Therefore, the cross-linking of these fibers is necessary for controlling their aqueous solubility. This led to enhanced biological characteristics of the fibers, rendering them excellent options for various biomedical uses. The objective of this review is to highlight the key research related to the electrospinning of collagen and gelatin, as well as their applications in the biomedical field. The review features a detailed examination of the electrospinning fiber mats, showcasing their varying structures and performances resulting from diverse solvents, electrospinning processes, and cross-linking methods. Judiciously selected examples from literature will be presented to demonstrate major advantages of such biofibers. The current developments and difficulties in this area of research are also being addressed.
The enhanced encapsulation capacity of polyhedral oligomeric silsesquioxane-based copolymers for the fabrication of electrospun core/shell fibers

Adam J P Bauer,Tingying Zeng,Jianzhao Liu,Chananate Uthaisar,Bingbing Li

DOI: https://doi.org/10.1002/marc.201400032

Abstract:This paper reports the use of polyhedral oligomeric silsesquioxane (POSS)-based copolymers to stabilize the core/shell interface for the facile fabrication of electrospun core/shell fibers. For the poly[(propylmethacryl-heptaisobutyl-polyhedral oligomeric silsesquioxane)-co-(methyl methacrylate)] (POSS-MMA)/poly(ε-caprolactone) (PCL) system, the bicontinuity of hybrid core/shell fibers can be tuned by controlling the phase separation of POSS-MMA/PCL in electrospinning solutions and therefore the size of PCL-in-POSS-MMA emulsion droplets. Our results demonstrate the enhanced encapsulation capacity of POSS-MMA copolymers as shell materials. Taking advantage of the rapid advancement of POSS-based copolymer synthesis, this study can potentially be generalized to guide the fabrication of various other POSS-based core/shell nano-/microstructures by using single-nozzle electrospinning or coaxial electrospinning.
Formation of Core–Shell Structures in Emulsion Electrospun Fibres: A Comparative Study

chong wang,min wang

DOI: https://doi.org/10.1071/CH14214

2014-01-01

Australian Journal of Chemistry

Abstract:Electrospinning has attracted great attention in recent years from different industries including biomedical engineering. Owing to the relative ease of fabricating ultrafine fibres with core-shell structures, emulsion electrospinning has been investigated intensively for making nanofibrous delivery vehicles for local and sustained release of bioactive or therapeutic substances, especially biomolecules such as growth factors. In preparing emulsions for electrospinning, different surfactants, ionic or non-ionic, can be used, which may subsequently influence the evolution of the core-shell structure in the electrospun emulsion jet or fibre. In this investigation, emulsions consisting of deionized water or phosphate buffer saline as the water phase, a poly(lactic-co-glycolic acid) solution as the oil phase and Span 80 (a non-ionic surfactant) or sodium dodecyl sulfate (an ionic surfactant) were electrospun into fibres for studying the core-shell structure and its evolution in emulsion electrospun fibres. Different microscopies were employed to study the morphological changes of the water phase in fibre samples collected at different locations along the jet (or fibre) trajectory during emulsion electrospinning. It was found that the evolution of the fibre core-shell structure was significantly different when different surfactants were used. If Span 80 was the surfactant, the water phase within the thick emulsion jet (or fibre) close to the Taylor cone existed in a discrete state whereas in ultrafine fibres collected beyond a certain distance from the Taylor cone, a mostly continuous water-phase core was observed. If sodium dodecyl sulfate was the surfactant, the core-shell structure in the thick jet (or fibre) was irregular but relatively continuous. A single core core-shell structure was eventually developed in ultrafine fibres. The core-shell structure in electrospun fibres and its evolution were also affected by the emulsion composition (e.g. polymer solution concentration, water-phase volume, and ion addition in the water phase).
Coaxial electrospun poly(methyl methacrylate)-polyacrylonitrile nanofibers: atomic force microscopy and compositional characterization.

T. Beebe,K. Strawhecker,J. Orlicki,N. Zander,A. Rawlett

DOI: https://doi.org/10.1021/jp205577r

2011-11-03

Abstract:Poly(methyl methacrylate) (PMMA)-polyacrylonitrile (PAN) fibers were prepared using a conventional single-nozzle electrospinning technique. The as-spun fibers exhibited core-shell morphology as verified by transmission electron microscopy (TEM) and atomic force microscopy (AFM). AFM-phase and modulus mapping images of the fiber cross-section and X-ray photoelectron spectroscopy (XPS) analysis indicated that PAN formed the shell and PMMA formed the core material. XPS, thermogravimetric analysis (TGA), and elemental analysis were used to determine fiber compositional information. Soaking the fibers in solvent demonstrated removal of the core material, generating hollow PAN fibers.

Medicine,Materials Science
Tailorable mechanical and degradation properties of KCl-reticulated and BDDE-crosslinked PCL/chitosan/κ-carrageenan electrospun fibers for biomedical applications: Effect of the crosslinking-reticulation synergy

Zulema Vargas-Osorio,Eduin I González Castillo,Nurshen Mutlu,Eva Vidomanová,Martin Michálek,Dušan Galusek,Aldo R Boccaccini,Eduin I. González Castillo,Aldo R. Boccaccini

DOI: https://doi.org/10.1016/j.ijbiomac.2024.130647

IF: 8.2

2024-04-01

International Journal of Biological Macromolecules

Abstract:The development of intricated and interconnected porous mats is desired for many applications in biomedicine and other relevant fields. The mats that comprise the use of natural, bioactive, and biodegradable polymers are the focus of current research activities. In the present work, crosslinked fibers with improved characteristics were produced by incorporating 1,4-butanediol diglycidyl ether (BDDE) into a polymer formulation containing polycaprolactone (PCL), chitosan (CS), and κappa-carrageenan (κ-C). A slight variation of formic acid (FA)/acetic acid (AA) ratio used as a solvent system, significantly affected the characteristics of the produced fiber mats. Both polysaccharides and BDDE played a major role in tailoring mechanical properties when fibrous scaffolds were reticulated under KCl-mediated basic conditions for determined periods of time at 50 °C. In vitro biological assessment of the electrospun fiber mats revealed proliferation of MC3T3-E1 cells when incubated for 1 and 7 days. After staining the cells with 4',6-diamidino-2-phenylindole (DAPI)/rhodamine phalloidin an autofluorescence response was observed by fluorescence microscopy in the scaffold manufactured using a solvent with higher FA/AA ratio due to the formation of microfibers. The results demonstrated the potential of the BDDE-crosslinked PCL/CS/κ-C electrospun fibers as promising materials for biomedical applications that may include soft and bone tissue regeneration.

polymer science,biochemistry & molecular biology,chemistry, applied
Multi-compartment Centrifugal Electrospinning Based Composite Fibers

Li Wang,Zeeshan Ahmad,Jie Huang,Jing-Song Li,Ming-Wei Chang

DOI: https://doi.org/10.1016/j.cej.2017.07.179

IF: 15.1

2017-01-01

Chemical Engineering Journal

Abstract:Multi-faceted technological advances in fiber science have proven to be invaluable in several emerging biomaterial and biomedical engineering applications. In the last decade, notable fiber engineering advances have been demonstrated ranging from co-axial flows (for micron and nano-scaled layering), non-concentric flows (for Janus composites) and even 3D printing (for controlled alignment). The ES process is however limited, both for commercial impact (low production rates) and also in its facile capability to deliver reliable mimicry of numerous biological tissues which comprise blended and aligned fibers (e.g. tendons and ligaments). In the technological advance demonstrated here, a combinatorial multi-compartment centrifugal electrospinning (CMCCE) system is developed and demonstrated. A proof-of-concept enabling multiple formulation solution hosting (including combinatorial grading) in a single centrifugal electrospinning system (CES) comprising one spinneret is shown. Using this process, controlled blending and tuning of resulting fibrous membrane properties (contact angle and active release behavior) via aligned and phased fiber mat composition is demonstrated. In addition, the CMCCE process is capable of replicating production rates of recently developed centrifugal electrospinning systems (similar to 120 g/h), while potentially permitting better mimicry of naturally occurring fibrous tissue blends. It is envisaged the advance in technology will be ideally suited to engineer synthetic fibrous biomaterials with greater host surface replication and will fulfil production rate requirements for the industrial sector.
An Insight into Nylon 6,6 Nanofibers Interleaved E-glass Fiber Reinforced Epoxy Composites

Sachin Chavan,Nand Jee Kanu,Sachin Shendokar,Balkrishna Narkhede,Mukesh Kumar Sinha,Eva Gupta,Gyanendra Kumar Singh,Umesh Kumar Vates

DOI: https://doi.org/10.1007/s40032-022-00882-0

2022-11-02

Journal of The Institution of Engineers (India): Series C

Abstract:The research work aims to investigate high-performance nylon 6,6 nanofiber interleaved E-glass fiber reinforced epoxy laminates (prepared using the electrospinning method) which exhibit unique design features in terms of improved mechanical strength. The influences of electrospinning control variables such as the nozzle of spinneret to grounded collector distance, rate of flow, high-voltage power supply, and concentration of polymeric solution to create high-quality nanofibers of specific length and diameter in nanometers are examined. The objectives of the current investigations are to develop delamination-resistant nylon 6,6 nanofibers interleaved E-glass fiber reinforced epoxy structural nanocomposites. The research efforts are thus focused to use electrospinning, vacuum assisted resin transfer molding (VARTM), and glass molding processes to fabricate nanocomposites with electrospun nylon 6,6 nanofibers. The specimens are described and evaluated in accordance with ASTM standards for tensile strength (D 638), flexural or bending strength (D 790-2003) of two-phase composites, and the hand molding or hand layup method are compared to the VARTM process. Two-phase nanocomposites containing nylon 6,6 nanofibers into the polymer matrix (Epolam 5015) are fabricated by glass molding process. The advanced composites are manufactured with primary reinforcement of eight-shaft satin weave pattern glass fiber 7781, with Epolam 5015 matrix and secondary reinforcement of nylon 6, 6 nanofibers with different diameters, i.e., 81, 455, and 1200 nm (multiscale). To achieve the different diameter fibers, statistical tools of design of experiment (DOE), full factorial and Taguchi are employed. Further they are characterized with (1) short beam shear strength (SBS) using ASTM 2344 standard for interlaminar shear strength and (2) double cantilever beam (DCB) using ASTM 5288 standard for Mode I fracture toughness for of three-phase nanocomposites. For better understanding the behavior of nanocomposites, the shear strength between laminate planes, or interlaminar shear strength (ILSS), of nylon 6,6 nanofiber interleaved composites is modeled using the finite element technique.
Design, fabrication, and analysis of spatially heterogeneous scaffold by melt electrospinning writing of poly(ε‐Caprolactone)

Fucheng Zhang,Kai Cao,Ahmadreza Zaeri,Ralf Zgeib,Robert C. Chang

DOI: https://doi.org/10.1002/app.52235

IF: 3

2022-02-04

Journal of Applied Polymer Science

Abstract:Melt electrospinning writing (MEW) that processes molten polymers has emerged as a reliable method to fabricate high‐fidelity fibrous tissue scaffolds for investigation of cell biological performance as a function of structural features. However, most of the current investigations have focused on the scaffolds with homogeneous features, which can yield homogeneous cell performance outcomes as expected. In contrast, spatially heterogeneous scaffolds with well‐defined, non‐uniform pore attributes can serve as biomimetic, multiplexed platforms for biological investigations. In this study, an analytically derived general heterogeneous toolpath design model is introduced. In addition to the traditional orthogonal fiber orientations, fiber placement along diagonal directions is introduced to generate semi‐0‐θ patterned or 0‐θ patterned heterogeneous scaffolds. By specifying model parameters and hence tuning the relative location of the diagonal fibers to orthogonal fibers, the customized heterogeneous scaffolds produced can possess at most three different pore morphologies. The various distributions of different pore morphologies within one scaffold are subsequently mapped by an advanced mathematical matrix method for the first time. Moreover, the proportion of different pore morphologies of semi‐0‐θ patterned scaffolds can be obtained numerically. Finally, this proposed analytical design model is preliminarily validated by fabrication using a MEW printing process. A toolpath design model is introduced to guide the spatially heterogeneous design via melt electrospinning writing. Main and counter diagonal microscale polymer fibers are introduced to generate heterogeneous scaffolds based on a prescribed design procedure. A mathematical matrix analysis method is advanced to analyze the distribution of different pore morphologies within heterogeneous scaffolds.

polymer science

Neoplastic properties of animal cell lines. Methods for determining neoplastic properties--discussion.

Designer Fibers from 2D to 3D – Simultaneous and Controlled Engineering of Morphology, Shape and Size

Aqueous-Based Coaxial Electrospinning of Genetically Engineered Silk Elastin Core-Shell Nanofibers

Biodegradable Fibrous Scaffolds Composed Of Gelatin Coated Poly(Epsilon-Caprolactone) Prepared By Coaxial Electrospinning

Magnetic-Field-Assisted Emulsion Electrospinning System: Designing, Assembly, and Testing for the Production of PCL/Gelatin Core–Shell Nanofibers

Modulation of Protein Release from Biodegradable Core-Shell Structured Fibers Prepared by Coaxial Electrospinning.

Fabrication and characterization of zein-based nanofibrous scaffolds by an electrospinning method.

Effect Of Fiber Structure On The Properties Of The Electrospun Hybrid Membranes Composed Of Poly(E-Caprolactone) And Gelatin

Interfacial blending in co-axially electrospun polymer core-shell fibers and their interaction with cells via focal adhesion point analysis

Coaxial Electrospinning and Characterization of Core-Shell Structured Cellulose Nanocrystal Reinforced PMMA/PAN Composite Fibers

Nanofibrous Mats of Rigid Polysaccharides Prepared by Coaxial Electrospinning

Processing-Mechanical Property Relationship of Hollow and Porous Carbon Fibers Fabricated by Coaxial Electrospinning

Formation Of Bead-Free And Core-Shell Superfine Electrospinning Fibers Under The Assistance Of Another Polymer And An Interfacial Compatibilizer

Design of Collagen and Gelatin-based Electrospun Fibers for Biomedical Purposes: An Overview

The enhanced encapsulation capacity of polyhedral oligomeric silsesquioxane-based copolymers for the fabrication of electrospun core/shell fibers

Formation of Core–Shell Structures in Emulsion Electrospun Fibres: A Comparative Study

Coaxial electrospun poly(methyl methacrylate)-polyacrylonitrile nanofibers: atomic force microscopy and compositional characterization.

Tailorable mechanical and degradation properties of KCl-reticulated and BDDE-crosslinked PCL/chitosan/κ-carrageenan electrospun fibers for biomedical applications: Effect of the crosslinking-reticulation synergy

Multi-compartment Centrifugal Electrospinning Based Composite Fibers

An Insight into Nylon 6,6 Nanofibers Interleaved E-glass Fiber Reinforced Epoxy Composites

Design, fabrication, and analysis of spatially heterogeneous scaffold by melt electrospinning writing of poly(ε‐Caprolactone)