Abstract:For rock fractures, the degradations in the strength of contacting asperities and the surface frictional resistance are responsible for the water-induced weakening in the shear strength. To quantitatively examine their independent roles, direct shear tests on sawtooth fracture samples of granite and sandstone under three moisture conditions: dry, surface wet and saturated, were conducted subject to three levels of normal stresses. The surface wet condition only resulted in the variation in the basic friction angle and the saturated samples underwent the degradation in both unconfined compressive strength (UCS) and basic friction angle, which were obtained via unconfined compression test and direct shear test, respectively. Two weakening coefficients that represent the reductions in UCS and basic friction angle, respectively, were proposed and incorporated into an analytical model, which quantifies the entire shear stress evolutions during shear based on a continuous yielding mechanism. The difference in the shear strength between dry and surface wet conditions originates from the lubricant effect of water represented by the change in basic friction angle with a weakening coefficient less than 10% for both rocks. Under the saturated condition, the weakening coefficient of the UCS varies significantly from 15.17% for granite to 50.39% for sandstone. A series of datasets that characterize the reductions in UCS and basic friction angle induced by water were collected from the literature, which were then incorporated into the analytical model to estimate the general weakening trend in the shear strength of the common rocks in practices. For crystalline rocks, the water-mediated lubrication seems to be the primary mechanism reducing the shear strength, while for sedimentary rocks, the remarkable degradation in UCS may dominate the weakening mechanism. The quantified weakening coefficients and the revealed weakening behavior of various rocks can be directly linked to the fracture shear strength estimation in engineering design.

Experimental investigation on shear behaviors of saw-toothed sandstone joints under various water vapor humidity conditions

Experimental and Numerical Investigation on Shear Failure Behavior of Rock-like Samples Containing Multiple Non-Persistent Joints

Shear behavior of two-order morphology in rock joints

Experimental study on shear performance of saw-tooth rock joint with weak interlayer under different moisture contents and filling degrees

Experimental Investigation on the Wetting-Induced Weakening of Sandstone Joints

Uniaxial compression mechanical properties and deterioration mechanism of sandstone under different humidity conditions

Mechanical damage evolution and mechanism of sandstone with prefabricated parallel double fissures under high-humidity condition

Investigations on the Jointed Influences of Saturation and Roughness on the Shear Properties of Artificial Rock Joints

Water saturation effects on dynamic behavior and microstructure damage of sandstone: Phenomena and mechanisms

Experimental study on the mechanical properties of intermittent jointed sandstone considering water-rock interaction and confining pressure effect

Investigation of the acoustic emission characteristics of artificial saw-tooth joints under shearing condition

Experimental study on the influence of height and dip angle of asperity on the mechanical properties of rock joints

On Size Effect of Rock Joints Roughness Based on Varied Statistical Methods

Experiment and particle flow simulation of unloading induced shearing properties for jointed sandstone materials

Stress effect & scale effect on shear properties of double saw-tooth rock joint surface

Influence of moisture content and intermediate principal stress on cracking behavior of sandstone subjected to true triaxial unloading conditions

Water saturation effects on the mechanical characteristics and fracture evolution of sandstone containing pre-existing flaws

Shear mechanical behavior and fracturing path of red sandstone treated by joninted effect of water-fractures

Shear Strength of Rock Fractures under Dry, Surface Wet and Saturated Conditions

Shear behaviours and roughness degeneration based on a quantified rock joint surface description

Study on Shear Slip Characteristics of Sandstone Plane Joints under Normal Dynamic Load Disturbance