Abstract:In lithium metal batteries (LMBs), the instability of the solid electrolyte interface (SEI) induced lithium dendrites and dead lithium frequently causes low cyclability and serious safety issues. Thereby, a highly stable artificial SEI layer with excellent lithium-ion mobility is desirable for dendrite-free lithium metal (LM) anodes. Herein, a novel clay/cross-linked network polymer-based artificial SEI layer (named as NCL) is prepared via compositing lithiated halloysite nanotubes (Li-HNTs) and cross-linked network polymers. The obtained NCL exhibits a promising Li+ transference number of 0.39, high ionic conductivity of 6.37 × 10-4 S cm−1 at 20 °C and superb mechanical performance. Benefiting these advantages, Li+ can be uniformly and fast plated/stripped under the protection of NCL, effectively suppressing the formation of lithium dendrites. The NCL-protected LM symmetrical cells can be stably cycled for more than 1000 h and 1100 h at 1 mA cm−2 under cycling capacities of 1 mAh cm−2 and 3 mAh cm−2, respectively. The NCL-Li|Cu half-cells present dendrite-free and reversible Li deposition with a high Coulombic efficiency of 99% for 170 cycles at 0.5 mA cm−2. Moreover, the LiFePO4 full-cell successfully achieves a good capacity of 115 mAh g−1 with a sensational capacity retention of 97.5% over 800 cycles at 2C. Additionally, 300 mAh LiNi0.8Co0.1Mn0.1O2-coupled pouch-cells not only can stably circulate more than 50 cycles, but also can reliably function at repetitive mechanical deformation statuses and at different damage conditions. Therefore, this novel hybrid artificial SEI protective layer with desirable properties shed new light on the practical application of high-performance LMBs.

Robust Artificial Solid‐Electrolyte Interfaces with Biomimetic Ionic Channels for Dendrite‐Free Li Metal Anodes

A Bifunctional Composite Artificial Solid Electrolyte Interphase for High Stable Solid-State Lithium Batteries

Building Artificial Solid‐Electrolyte Interphase with Uniform Intermolecular Ionic Bonds toward Dendrite‐Free Lithium Metal Anodes

A polymer brush-based robust and flexible single-ion conducting artificial SEI film for fast charging lithium metal batteries

Constructing a robust artificial solid electrolyte interphase with a metal–organic framework for a stable Li metal anode

In-Situ Electrodeposition of Nanostructured Carbon Strengthened Interface for Stabilizing Lithium Metal Anode

g‐C 3 N 4 Derivative Artificial Organic/Inorganic Composite Solid Electrolyte Interphase Layer for Stable Lithium Metal Anode

Lithiated halloysite nanotube/cross-linked network polymer composite artificial solid electrolyte interface layer for high-performance lithium metal batteries

Bi-containing Electrolyte Enables Robust and Li Ion Conductive Solid Electrolyte Interphase for Advanced Lithium Metal Anodes

Achievement of high-cyclability and high-voltage Li-metal batteries by heterogeneous SEI film with internal ionic conductivity/external electronic insulativity hybrid structure

g-C<sub>3</sub>N<sub>4</sub>Derivative Artificial Organic/Inorganic Composite Solid Electrolyte Interphase Layer for Stable Lithium Metal Anode

Uniform High Ionic Conducting Lithium Sulfide Protection Layer for Stable Lithium Metal Anode

In-situ constructed polymer/alloy composite with high ionic conductivity as an artificial solid electrolyte interphase to stabilize lithium metal anode

A Dynamic, Electrolyte-Blocking, and Single-Ion-Conductive Network for Stable Lithium-Metal Anodes

Synthetic poly-dioxolane as universal solid electrolyte interphase for stable lithium metal anodes

A Highly Reversible, Dendrite‐Free Lithium Metal Anode Enabled by a Lithium‐Fluoride‐Enriched Interphase

A Facile Way to Construct Stable and Ionic Conductive Lithium Sulfide Nanoparticles Composed Solid Electrolyte Interphase on Li Metal Anode

Simultaneously in-situ fabrication of lithium fluoride and sulfide enriched artificial solid electrolyte interface facilitates high stable lithium metal anode

An artificial layer enables in situ generation of a homogeneous inorganic/organic composite solid electrolyte interphase for stable lithium metal batteries

Constructing an Inorganic-Rich Solid Electrolyte Interphase by Adjusting Electrolyte Additives for Stable Li Metal Anodes