Wideband high gain metasurface-based 4T4R MIMO antenna with highly isolated ports for sub-6 GHz 5G applications

Mahdi Salehi,Homayoon Oraizi

DOI: https://doi.org/10.1038/s41598-024-65135-9

IF: 4.6

2024-06-26

Scientific Reports

Abstract:This study presents the design of four  (mm) wideband, high gain, highly efficient metasurface-based 4T4R MIMO (Multiple-Input Multiple-Output) antennas with highly isolated ports, covering the middle and a portion of the upper bands of the sub 6 GHz 5G frequency spectrum for 5G-based systems, such as IoT (Internet of Things) applications, vehicular communications (e.g., rooftop antennas of cars or trains), smart industries (e.g., farms and factories). The radiating elements of these antennas use the aperture-coupled feeding technique with a dumbbell-shaped slot, a truncated square patch with two U-shaped slots, and a metasurface layer. The proposed MIMO structures place four identical radiating elements like a matrix with successive rotations to produce orthogonal electromagnetic waves, improving the isolation between ports. Six-millimeter spaces are added between these elements, and two vertical and horizontal strip slots are carved on the ground as the decoupling structure to decrease the mutual coupling. Simulation results show that Antenna_1, Antenna_2, and Antenna_3 achieve gain values of 6.2 to 9.4 dBi, 8.2 to 11.6 dBi, 6.2 to 9.5 dBi, below − 35, − 25, and − 33 isolation and almost 10 dB diversity gain from 2.8 to 4.7 GHz, 2.8 to 4.5 GHz, and 2.7 to 4.9 GHz, respectively. As a prototype, Antenna_4 is manufactured, and measurements are performed. It achieves 6.28 to 10.45 dBi gain values, below − 23 dB isolation, and 0.001 envelope correlation coefficient over 2.7 to 4.3 GHz. The results confirm that the proposed MIMO antennas are compatible with the 5G essential requisites.

multidisciplinary sciences

What problem does this paper attempt to address?

This paper attempts to address the design of efficient, high-gain, broadband MIMO antennas suitable for vehicle communication, IoT applications, and smart industries in the context of 5G technology. Specifically, the main research objectives include:

1. **High Gain and Low Coupling**: Design a MIMO antenna with high gain characteristics while achieving high isolation between ports to reduce mutual coupling.

2. **Broadband Performance**: Ensure the antenna can operate within the Sub-6 GHz band (particularly in the 3 to 4 GHz range), covering the mid and part of the high-frequency bands required by 5G technology.

3. **High Radiation Efficiency**: Enhance the antenna's radiation efficiency by adopting metasurface layers and special design structures to meet the demands of 5G applications for high data transmission rates and low latency.

4. **Suitability for Mobile Environments**: Optimize the antenna design specifically for vehicle communication scenarios, considering the performance requirements of high-speed moving objects, such as high channel capacity, high-quality signals, and low multipath fading effects.

The study proposes four different versions of 178×178 mm² 4T4R MIMO antennas (Antenna_1 to Antenna_4) and validates their excellent performance in the 2.8 to 4.7 GHz band through simulation and measurement, demonstrating that these antenna designs are highly suitable for applications in next-generation 5G networks, including in-vehicle systems, IoT devices, and smart manufacturing.