Abstract:A novel microfibrous composite bed reactor was developed and was demonstrated for high efficiency hydrogen production by the decomposition of ammonia at moderate temperatures in portable fuel cell power system applications. By using a high-speed and low-cost papermaking technology combined with a subsequent sintering process, sinter-locked three-dimensional microfibrous networks consisting of similar to 3 vol% 8 mm (dia.) nickel microfibers were utilized to entrap similar to 35 vol% 100-200 mu m dia. porous Al2O3 support particulates. A CeO2 promoter and active Ni component were then dispersed onto the pore surface of the entrapped Al2O3 support particulates by a stepwise incipient wetness impregnation method. The microfibrous structure took advantage of a large void volume, entirely open structure, high heat/mass transfer, high permeability, good thermal stability, and unique form factors. Addition of ceria significantly promoted the low-temperature activity of Ni/Al2O3 catalyst particulates incorporated into the micorfibrous structure. The use of fine particles of catalyst significantly attenuated the intraparticle mass transport limitations. As a result, the present novel microfibrous composite bed reactor provided excellent activity and structure stability in ammonia decomposition, as well as low pressure drop and high efficiency reactor design. At a 90% conversion of a 145 sccm ammonia feed rate, the microfibrous entrapped Ni/CeO2-Al2O3 catalyst composite bed could provide a 4-fold reduction of catalytic bed volume and a 5-fold reduction of catalytic bed weight (or 9-fold reduction of catalyst dosage), while leading to a reduction of reaction temperature of 100 degrees C, compared to a packed bed with 2 mm dia. Ni/CeO2-Al2O3 catalyst pellets. This composite bed was capable of producing roughly 22 W of hydrogen power, with an ammonia conversion of 99% at 600 degrees C in a bed volume of 0.5 cm(3) throughout a 100 h continuous test. These initial and promising results established that the microfibrous nickel-based catalyst composites were effective for high efficiency production of hydrogen by ammonia decomposition, while achieving a significant reduction of overall catalytic bed weight and volume. We anticipate our assay to be a new point for small-scale hydrogen production, where the microfibrous catalytic reactors considered in isolation can satisfy several of the most fundamental criteria needed for useful operation.

Green synthesis of porous Ni‐silicate catalyst for hydrogen generation via ammonia decomposition

In Situ Construction of Ni Enriched Porous NiAl As Long-Lived Electrode for Hydrogen Evolution at High Current Densities

Effective Hydrogen Production from Partial Oxidation of Propane over Composite Ni/Al2O3-SiC Catalyst

Synthesis of Mesoporous Cu-Ni/Al2O4 Catalyst for Hydrogen Production via Hydrothermal Reconstruction Route

Scalable Synthesis of Hollow MoS 2 Nanoparticles Modified on Porous Ni for Improved Hydrogen Evolution Reaction

Monolithic microfibrous nickel catalyst co-modified with ceria and alumina for miniature hydrogen production via ammonia decomposition

Amorphous Nickel Nanofilms for Efficient Hydrogen Generation from ammonia borane

One-pot Synthesis of Ultrafine Ni0.13Co0.87P Nanoparticles on Halloysite Nanotubes As Efficient Catalyst for Hydrogen Evolution from Ammonia Borane

Na‐ZSM‐5 Zeolite Nanocrystals Supported Nickel Nanoparticles for Efficient Hydrogen Production from Ammonia Decomposition

Clean hydrogen production from ammonia decomposition over zeolite 13X-supported Ni catalysts

Phyllosilicate-derived Ni catalysts with small nanoparticle size and strong metal-support interaction for efficient and robust decomposition of ammonia

Etching-assisted synthesis of Ni/Ni single atom anchored porous graphitic nanocarbon for improved hydrogen evolution reaction

Heterostructured Ni/NiO Nanoparticles on 1D Porous MoO x for Hydrolysis of Ammonia Borane

Heterostructured Ni/NiO Nanoparticles on 1D Porous MoOx for Hydrolysis of Ammonia Borane

Engineering morphologies of yttrium oxide supported nickel catalysts for hydrogen production

Syntheses of Pt‐Ni Hollow Nanoalloy for Hydrogen Generation from Catalytic Hydrolysis of Ammonia Borane

Self‐Limited Formation of Nanoporous Nickel Heterostructure Catalyst for Electrochemical Hydrogen Production

Novel microfibrous composite bed reactor: high efficiency H2 production from NH3 with potential for portable fuel cell power supplies.

Self-Assembled Preparation of Porous Nickel Phosphide Superparticles with Tunable Phase and Porosity for Efficient Hydrogen Evolution

Promoted Multimetal Oxide Catalysts for the Generation of Hydrogen Via Ammonia Decomposition

Hollow NiMo-based Nitride Heterojunction with Super-Hydrophilic/aerophobic Surface for Efficient Urea-Assisted Hydrogen Production