Abstract:Fe3O4 nanoparticles were synthesized by an eco‐friendly process and were used as adsorbents to remove methylene blue from aqueous solutions. The effects of pH, adsorbent dose, kinetics, isotherm, and thermodynamics parameters were studied. The adsorption systems were found to be compatible with the Langmuir isotherm model and the pseudo‐second‐order kinetic model. The magnetic properties of the adsorbents allow them to be separated from wastewater by simple separation. For the optimization of the adsorption variables, response surface methodology was successfully applied, and optimum values of these variables were determined with a quadratic model equation. Water coloring has the properties of resistance to mutagenic, toxic, aggressive, carcinogenic, destructive, strong light and unstable oxidation and air pollution and has serious effects on environmental systems and human health. Because of its severe toxicity, methylene blue (MB) can cause cancer, mutagenesis, and teratogenic consequences in people as well as enter the food chain. The main objective of this investigation is to study the modeling and the optimization parameters of MB adsorption using a low‐cost adsorbent Fe3O4. The parameters evaluated for adsorption are the adsorbent dosage, pH, contact time, and temperature using the response surface methodology. The principal variables affecting MB removal were pH (3–11), catalyst dosage (0.01–0.3 g), contact duration (10–180 min), and temperature (25–55 °C). To select an experimental domain, a preliminary study was performed first. The results showed that at pH 10, 1.4 g L−1 Fe3O4‐nanoparticles (NPs) had the highest removal efficiency of cationic dye MB (20 ppm) from aqueous solutions by batch adsorption technique. The pseudo‐second‐order (PSO) kinetic models and the Langmuir isotherm provided the best fit for the adoption of MB. The adsorption process was exothermic and spontaneous, according to thermodynamics studies. To determine the effect of the investigated variables and their interaction on the adsorption process, a Box–Behnken design was used. A second‐order polynomial equation was used to model the experimental results. The experimental findings were consistent with the suggested model as demonstrated by the high value of the determination coefficient. The performance of the model equation verified the experimental observation with just a slight divergence, and the values acquired from the experiment and model predictions were found to be in suitable agreement. According to the numerical optimization, 98.61 % is the optimal elimination efficiency for MB adsorption. These results suggest that an adsorption process utilizing Fe3O4 NPs is efficient in environmental remediation.

Lemon Peel‐Extracted Recyclable Copper Oxide Nanoparticles for Methylene Blue Dye Adsorption: Optimization, Isotherms, Kinetics, Thermodynamics, and Reusability Study

Catalytic Reduction of Methylene Blue Dye by Copper Oxide Nanoparticles

In Situ Synthesis of Cu2O Nanoparticles Using Eucalyptus globulus Extract to Remove a Dye via Advanced Oxidation

Isotherm, Kinetics, Thermodynamics, Recyclability and Mechanism of Ultrasonic assisted Adsorption of Methylene Blue and Lead (II) ions using Green Synthesized Nickel Oxide Nanoparticles

Biogenic synthesis of copper oxide nanoparticles using a cold tolerant bacterium for RB5/DR23 Azo dye adsorption

Green synthesis of copper oxide nanoparticles using Ziziphus oenoplia extract and its dye degradation properties

Adroit effect of copper nanoparticles and copper nanozyme and their effective decolorization of azo dyes

Adsorption studies of Methylene Blue, Coomassie Brilliant Blue, and Congo Red dyes onto CuO/C nanocomposites synthesized via Vitex negundo Linn leaf extract

Utilization of nano-biosorbents based on pine needles and banana peel for methylene blue removal: equilibrium, kinetics, thermodynamic study, and application

Citrus limon peel-based biosynthesis: Lead oxide, zinc oxide, cadmium oxide, and copper oxide nano quantum dots for subtraction of anionic Actas Pink dye (AAPD)

Efficient adsorptive removal of paracetamol and thiazolyl blue from polluted water onto biosynthesized copper oxide nanoparticles

Synthesis of Mg-Doped CuO Nanoparticles for Efficient Removal of Congo Red Dye from Wastewater: Adsorption Study

Methylene Blue Adsorption by Fe3O4 Nanoparticles: An Optimization Study Using Response Surface Methodology

Ophiorrhiza mungos -Mediated Silver Nanoparticles as Effective and Reusable Adsorbents for the Removal of Methylene Blue from Water

Magnetically separable Cu0.5Ni0.5MnFeO4@GO nanocomposites for efficient methylene blue removal

Graphene Nanosheets Decorated with Copper Oxide Nanoparticles for the Photodegradation of Methylene Blue

Adsorptive Removal of Congo Red Using Organically Modified Zinc–Copper–Nickel Ternary Metal Hydroxide: Kinetics, Isotherms and Adsorption Studies

Green synthesis of CuO nanoparticles using Jasmin sambac extract: Conditions optimization and photocatalytic degradation of Methylene Blue dye

Poly(methyl methacrylate) functionalized graphene oxide/CuO as nanocomposite for efficient removal of dye pollutants

Facile combustion derived synthesis of copper oxide nanoparticles: Application towards photocatalytic, electrochemical and DNA cleavage studies

Adsorption of dyestuff by nano copper oxide coated alkali metakaoline geopolymer in monolith and powder forms: Kinetics, isotherms and microstructural analysis