Abstract:Ejector refrigeration systems pose a promising alternative to vapour compressor technologies. Still, they have not been penetrating the market because of the strong dependency of the ejector behaviour ("component-scale") on the underlying fluid-dynamics ("local-scale"), which directly affects the system performances ("system-scale"). Furthermore, within the broader discussion concerning refrigerant phase-out, the refrigerant selection is a cutting-edge and challenging task, especially because the ejector performance is influenced by the coupling taking place between the working fluid and component design. This paper contributes to the broader framework of ejector research investigating the complex relationships between the factors mentioned above that arise during the operation of a standard ejector refrigeration system. An integrated model (CFD-LPM) has been applied to compare fourth generation and natural refrigerants (R1233zd(E), R1234yf, R1234ze(E), R290, R1270, and R600a) to commonly used refrigerants (R134a, R245fa, R152a) on five ejector geometries, obtained changing the nozzle exit position and the mixing chamber throat dimension from a reference case. Based on the results in terms of performance curves, tested refrigerants could be divided into three groups: (i) R1270 and R290, having higher COP (0.5 – 1.03) but lower critical temperature Tcrit (20.7 – 25.0 °C), (ii) R134a, R152a, R1234yf, R1234ze R600a, with an intermediate value of COP (0.27 – 0.83) and critical temperature Tcrit (22.8 – 28.0 °C), (iii) R245fa and R1233zd, with lower COP (0.25 – 0.58) but higher critical temperature Tcrit (26.0 – 31.0 °C). Increasing nozzle exit position has been found to slightly affect the performances (+5% COP) while the ejector entrainment process has been found to highly depend on the mixing chamber diameter (up to +35% COP). One of the tested geometries has been then selected, with R290 as operative fluid, to perform a boundary conditions sensitivity analysis. This led to the definition of a system performance map for different system temperature levels at the generator and evaporator.

Thermodynamic analysis and optimization of a modified cascade refrigeration system using two-phase ejectors and low GWP fluids

Energy and exergy analysis of a new ejector enhanced auto-cascade refrigeration cycle

Investigation on A Two-Stage Ejection Refrigeration System

Advanced Exergy Analysis on a Modified Auto-Cascade Freezer Cycle with an Ejector

Performance Analysis of an Advanced Ejector-Expansion Autocascade Refrigeration Cycle

Experimental investigation on two-phase driven ejector performance in a novel ejector enhanced refrigeration system

The new refrigeration system with vortex tube and ejector

Optimisation of a Cascade Refrigeration System with Natural Refrigerants, Based on Nature-Inspired Algorithms

Theoretical Analysis on a Novel Two-Stage Compression Transcritical CO2 Dual-Evaporator Refrigeration Cycle with an Ejector

Thermodynamic Analysis on A Novel Gas-gas Ejector Enhanced Autocascade Refrigeration Cycle

Thermodynamic Investigation on Low GWP Drop‐in Alternatives to HFC‐245fa in Ejector Refrigeration Cycle for Air Condition Application

Optimization Analyses on the Performance of an Auto-Cascade Absorption Refrigeration System Operating with Mixed Refrigerants

Thermodynamic Analysis of a Modified Transcritical Co2 Two-Stage Compression Dual-Temperature Refrigeration Cycle with an Ejector

Performance Evolution on A Dual-Temperature Co2 Transcritical Refrigeration Cycle with Two Cascade Ejectors

Multi-scale evaluation of ejector performances: The influence of refrigerants and ejector design

Thermodynamic analysis and performance optimization on an ultra‐low‐temperature cascade refrigeration system using refrigerants R290 and R170

Performance Analysis of a Modified Ejector-Enhanced Auto-Cascade Refrigeration Cycle

Thermodynamic Analysis on a Modified Ejector Expansion Refrigeration Cycle with Zeotropic Mixture (r290/r600a) for Freezers

Theoretical Analysis and Optimization of a Hybrid CO2 Transcritical Mechanical Compression – Ejector Cooling Cycle

An Experimental Investigation on a Modified Cascade Refrigeration System with an Ejector

An Improved Cascade Mechanical Compression–ejector Cooling Cycle