Abstract:Electrocatalytic reduction has recently received increasing attention as a method of converting waste nitrate into value-added ammonia, but most studies have focused on complex strategies of catalyst preparation and little has been done in the way of large-scale demonstrations. Herein, we report that in situ activation of a pristine Ni electrode, either on a lab scale or a pilot scale, is effective in facilitating nitrate reduction to ammonia, exhibiting extraordinarily high activity, selectivity, and stability. The self-activated Ni cathode has a robust capacity to reduce nitrate over a wide range of concentrations and achieves great conversion yield, NH4+–N selectivity, and Faradaic efficiency, respectively, 95.3, 95.5, and 64.4% at 200 mg L–1 NO3––N and 97.8, 97.1, and 90.4% at 2000 mg L–1 NO3––N, for example. Fundamental research indicates that Ni(OH)2 nanoparticles are formed on the Ni electrode surface upon self-activation, which play crucial roles in governing nitrate reduction reaction (NO3RR) through the atomic H*-mediated pathway and accordingly suppressing hydrogen evolution reaction. More importantly, the self-activated Ni(OH)2@Ni cathode can be easily scaled up to allow large volumes of real industrial wastewater to be processed, successfully transferring nitrate into ammonia with high yields and Faradaic efficiency. This study demonstrates a new, mild, and promising method of cleaning nitrate-laden wastewater that produces ammonia as a valuable byproduct.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.est.1c02278.Quantification of the concentration of 15NH4+-N by 1H NMR spectroscopy, material characterizations, chemical analysis, electrochemical measurements, calculations of the conversion efficiency (%), product selectivity of (%), Faradaic efficiency (%), and the ECSA, DFT calculations, water quality parameters, variations in the values of cell voltage, comparisons of NH4+-N selectivity and Faradaic efficiency between this study and the literature, schematic diagram of the pilot-scale process flow for nitrate wastewater treatment, photos of the electrolytic reactor, comparisons of plots of –ln(Ct/C0) versus time, CV curves, corresponding capacitive currents, and specific activity between the pristine and the self-activated Ni foam electrodes, variations in the pH values as a function of time at different electrolysis cycles, leaching of Ni2+ during the in situ activation process, variations in the concentrations of NH4+–N and NO3––N at different initial concentrations of NO3––N, QS-XPS survey spectra of Ni foam at different electrolysis cycles, XRD patterns, O 1s and Ni 2p QS-XPS spectra, LSV and CV curves, variations in ECSA-normalized LSV curves, and variations in the concentrations of NH4+–N and NO3––N in the real wastewater (PDF)This article has not yet been cited by other publications.

Photocatalytic ammonia synthesis from nitrate reduction on nickel single-atom decorated on defective tungsten oxide

NiWO4 nanoparticles with oxygen vacancies: High-efficiency electrosynthesis of ammonia with selective reduction of nitrite

Ambient ammonia synthesis via nitrite electroreduction over NiS 2 nanoparticles-decorated TiO 2 nanoribbon array

PdSn/NiO/NaTaO3:La for Photocatalytic Ammonia Synthesis by Reduction of NO3− with Formic Acid in Aqueous Solution

Ultrathin Ni/V-layered double hydroxide nanosheets for efficient visible-light-driven photocatalytic nitrogen reduction to ammonia

Elaborately tuning the electronic structure of single-atom nickel sites using nickel nanoparticles to markedly enhance the electrochemical reduction of nitrate into ammonia

Wettability control of defective TiO2 with alkyl acid for highly efficient photocatalytic ammonia synthesis

High-Efficiency Ammonia Electrosynthesis on Anatase TiO 2- x Nanobelt Arrays with Oxygen Vacancies by Selective Reduction of Nitrite

Ambient Electroreduction of Nitrite to Ammonia over Ni Nanoparticle Supported on Molasses-Derived Carbon Sheets

N‐Coordinated Cu–Ni Dual‐Single‐Atom Catalyst for Highly Selective Electrocatalytic Reduction of Nitrate to Ammonia

Self-Activated Ni Cathode for Electrocatalytic Nitrate Reduction to Ammonia: From Fundamentals to Scale-Up for Treatment of Industrial Wastewater

Electrocatalytic nitrate reduction to ammonia on defective Au1Cu (111) single-atom alloys

Defective TiO2- x for High-Performance Electrocatalytic NO Reduction toward Ambient NH3 Production

Electrocatalytic Reduction of Nitrate to Ammonia via a Au/Cu Single Atom Alloy Catalyst.

Nano-Polycrystalline Cu Layer Interlaced with Ti3+-Self-Doped TiO2 Nanotube Arrays as an Electrocatalyst for Reduction of Nitrate to Ammonia

Nickel-cobalt alloy nanosheet-decorated three-dimensional titanium dioxide nanobelts electrodeposited on titanium meshes for boosting selective nitrate electroreduction to ammonia

Ultrathin Co0.5NiS Nanosheets for Hydrazine Oxidation Assisted Nitrite Reduction

Co-Ni bimetallic oxide with tuned surface oxygen vacancies efficiently electrocatalytic reduction of nitrate to ammonia

Tungsten Nitride/Tungsten Oxide Nanosheets for Enhanced Oxynitride Intermediate Adsorption and Hydrogenation in Nitrate Electroreduction to Ammonia

Vacancy-Rich and Porous NiFe-Layered Double Hydroxide Ultrathin Nanosheets for Efficient Photocatalytic NO Oxidation and Storage

Engineering of local electron properties optimization in single-atom catalysts enabling sustainable photocatalytic conversion of N2 into NH3