Abstract:As a novel rich nitrogen content material, 5-Amino-1H-Tetrazole (5AT) has been considerably popularized in the propellants area recently. The pyrolysis is deemed as the prelude of combustion for solid phase 5AT, which plays a crucial role in combustion process and grasping the pyrolysis characteristics will be more beneficial to further explore the combustion properties of 5AT-based propellant. In this paper, several efforts have been made to enhance the pyrolysis behaviors of 5AT, including employing metal particles as catalysts, and modifying the surface treatment method. Due to the calorific value, the boron and copper powder are selected as the potential catalysts. The solvent/non-solvent (S/NS) and solution recrystallization method are compared to explore the impact of these two modification methods. TG-FTIR technique is applied to capture evolved signals of organic compounds to further deduce the most probable decomposition pathway. Moreover, model-free and model-fitting methods are both employed to calculate the kinetic parameters. The results reveal that, for the modified 5AT samples with the same boron powder catalyst, the activation energies and reaction model (all governed by F4) in the initial stage (100–330 °C) are not significantly impacted by these two modification methods. However, during the latter stages (400–750 °C), the catalytic actions of boron powder appear to be more active, and solution recrystallization method exerts better modification effect, the activation energies was reduced 18.3 kJ/mol and 10.9 kJ/mol respectively for the latter stages compared to S/SN method. Also, the reaction model is transformed from nth-dimensional model (D3) to nth-order model (F1) in the third stage. Particularly, the catalytic actions of copper powder results in the simplification of decomposition steps for 5AT, the activation energies was 138.8 kJ/mol and the catalytic effect of which was improved about 25% compared to the catalytic effect of boron powder in the first stage and its reaction model is also found to be changed into F3. It illustrates that copper powder could embody a better catalytic effect than boron powder under the same modification method. The conclusions of this study could provide a worthwhile guidance for the understanding, designs and applications of the 5AT-based propellants.

Investigation of the Reaction Mechanism of 5-Amino-1H-Tetrazole with Nitrocellulose Using Thermal Analysis Techniques

Experimental insight into interaction mechanism of guanidinium-5-aminotetrazole (GA) and nitrocellulose

Insights into pyrolysis and combustion mechanism of green energetic agent 5-amino-1 h-tetrazole with different particle sizes

Experimental insight into interaction mechanism of 1H-Tetrazloe and nitrocellulose by kinetics methods and TG-DSC-FTIR analysis

Interaction Mechanism Studies of 1H-Tetrazole Derivatives and Nitrocellulose. Part 1: Introduction of Amino Groups on C and N Atoms

Effect of multi-type oxides on the catalytic pyrolysis behaviors of 5-amino-1H-tetrazole

Effects of nitroguanidine on the thermal behavior and burning characteristics of 5-amino-1H-tetrazole-based propellants

Experimental Investigation on Combustion Behaviors and Reaction Mechanisms for 5-Aminotetrazole Solid Propellant with Nanosized Metal Oxide Additives under Elevated Pressure Conditions

Experimental insight into catalytic mechanism of transition metal oxide nanoparticles on combustion of 5-Amino-1H-Tetrazole energetic propellant by multi kinetics methods and TG-FTIR-MS analysis

anidine on the thermal behavior and burning characteristics of 5-amino-1 H-tetrazole-based propellants

Exploring the Influence of Metal Oxides on the Pyrolytic Behavior and Decomposition Mechanism of the Green Gas Generating Agent 5-Aminotetrazole

Catalytic pyrolysis of 5-Amino-1H-Tetrazole with copper and its oxide: A deep insight into the combustion mechanism for high nitrogen compound

A strategic approach to thermal stability enhancement of nitrocellulose

Insights into thermochemistry, kinetics, and pyrolysis behavior of green gas generator 5- aminotetrazole by experiment and theoretical methods

Catalytic co-pyrolysis of 5-Amino-1H-Tetrazole assembled with copper and boron powder: Pyrolysis kinetics and reaction mechanism

Characterization of thermal decomposition mechanism and combustion performance of 4,4’‐azobis(1,2,4‐triazole)**

Particle size effects on thermal kinetics and pyrolysis mechanisms of energetic 5-amino-1h-tetrazole

Thermal Decomposition Behavior, Kinetics, Thermal Safety and Burning Characteristics of Guanidinium-5-aminotetrazole (GA) Based Propellants

Thermal stability assessment of nitrocellulose by using multiple calorimetric techniques and advanced thermokinetics

Analysis and Characterization of Nitrocellulose As Binder Optimized by 1-Butyl-3-methylimidazolium Bis(trifluoromethylsulfonyl)imide

Pyrolysis Kinetics and Combustion Behaviors of a High-Nitrogen Compound, 4,4'-Azobis(1,2,4-triazole)