Abstract:In countries suffering from heavy ambient air pollution, ventilation is a problem, as ventilation intakes outdoor air pollutants, such as particulate matter with an aerodynamic diameter less than 2.5 um (PM2.5), while removing indoor air pollutants. Thus, it is important to identify appropriate ventilation-purification strategies to build healthy indoor environments with low energy consumption. This study reports the comparison of two sets of strategies, i.e., mechanical ventilation with filters and natural ventilation with indoor air cleaners, in respect to energy consumption and the PM2.5 and carbon dioxide (CO2) exposure of occupants in a typical apartment in Beijing, China. A dynamic mass balance model was employed to calculate the PM2.5 and CO2 exposure concentrations, while the energy consumption of heating and cooling was simulated with the Designer's Simulation Toolkit. It was found that natural ventilation with air cleaners provided lower PM2.5 exposure compared with that of mechanical ventilation with filters; however, mechanical ventilation achieved a lower CO2 exposure concentration. The annual cooling, heating, and fan energy consumption of natural ventilation strategies are lower than those of mechanical ventilation strategies. With respect to natural ventilation, an infiltration rate of 0.3–0.4 h−1 was the preferred setting, which led to low PM2.5 and CO2 exposure with lower energy consumption. The basic requirements for controlling indoor PM2.5 could be met if the threshold is set at 25 µg/m3. The results provide guidelines on how to combine multiple ventilation purification strategies to improve indoor air quality with lower energy usage.

Influence of air inlet/outlet arrangement of displacement ventilation on local environment control for unearthed relics within site museum

Energy-efficient preservation environment control for enclosed exhibition hall of earthen relics

Life Cycle Energy Analysis of Museum Buildings: A Case Study of Museums in Hangzhou

The indoor thermal environment performance of various air-conditioning system configurations and airflow modes in a large space museum building

Research on Thermal and Humidity Environment of Cultural Relics Exhibition Room

Evaluation of air curtain system orientated to local environmental control of archaeological museum: A case study for the stone armor pit of Emperor Qin’s Mausoleum Museum

A Museum Storeroom Air-Conditioning System Employing the Temperature and Humidity Independent Control Device in the Cooling Coil

Correlation of Environmental Parameters and the Water Saturation Induced Deterioration of Earthen Archaeological Sites: the Case of World Heritage Liangzhu City, China

Performance investigation of outdoor air supply and indoor environment related to energy consumption in two subway stations

A novel humidity control system for cultural relic showcase

Examination and Optimization of Classroom Indoor Environments in China’s Hot Summer and Cold Winter Regions

Quantitative Analysis of Mold Growth Differences on Surfaces in Damp Soil Ruins Affected by Ventilation and Lighting Modes: Soil Ruin Exhibition Halls in High-humidity Regions

Influence of the Visitor Walking on Airflow and the Bioaerosol Particles in Typical Open Tomb Chambers: An Experimental and Case Study

Research on the Cooling Characteristics in Building Interior Zones Using Displacement Ventilation System

Numerical and Experimental Investigation on Environmental Air Exchange in a Museum Showcase

A comparative study of the effects of ventilation-purification strategies on air quality and energy consumption in Beijing, China

A Study of Fresh Air Control in Subway Stations

REFLECTIONS ON THE INDOOR ENVIRONMENTAL MONITORING SYSTEM OF THE HERITAGE BUILDINGS IN THE PALACE MUSEUM – A CASE STUDY OF THE MERIDIAN GATE EXHIBITION HALL

Simulation Study On The Energy Comsumption Of Displacement Ventilaiton In Comparison With Mixing Ventilaiton

Optimal ventilation rate for effective displacement ventilation