Abstract:In order to solve the problem of insufficient penetration ability of common liner, a new three-layer liner was proposed. AUTODYN software was used to simulate the efflux forming process of three-layer liner. The influence of four different impact impedance liner materials and different thickness ratio of three-layer liner on efflux performance was studied. In order to study the penetration ability of shaped charge to semi-infinite target plate, the penetration calculation of the target plate was carried out by taking several standoff under different thickness ratios. The optimal thickness ratio of three-layer liner was determined by studying the penetration depth and opening size of the target plate. The results show: By comparing the matching of liner materials with different impact impedances, the head velocity, effective length, total energy, total kinetic energy and effective jet mass of the jet formed when the three-layer liner material is AL 2024, copper and nickel from the outside to the inside are the best. In the analysis of the matching of the thickness ratio of the three-layer liner, the key to the jet forming is the thickness ratio of the outer liner. Within a certain range, the greater the proportion of the thickness of the outer liner, the better the jet forming; when the material of the three-layer liner is AL 2024-copper-nickel from outside to inside, the thickness ratio of the liner is 4/1/1 from outside to inside, and the jet forming is the best. The maximum penetration depth of the shaped charge with a thickness ratio of 1/1/4 from the outside to the inside of the three-layer liner is 395.5 mm, which is 52.3% higher than that of the shaped charge with a double-layer liner. Compared with the shaped charge with single-layer liner, the penetration depth is increased by 62.6%. When the thickness ratio of the three-layer liner is 1/1/4 from the outside to the inside, the maximum entrance diameter of the target plate is 14.3 mm, which is the same as that of the shaped charge with the double-layer liner. Compared with the shaped charge with single-layer liner, the entrance diameter is in-creased by 14.4%.

Selection of shaped charges parameters for producing aluminum particles with velocities in the range of 2.5–16 km/s

Magnetic field using to obtain from the shaped-charge jet of a high-velocity metal element for the objects testing on anti-meteoric resistance

The features of the process of forming compact elements of variable shape from metal liners for testing anti-meteoroidal protection for spacecraft

Formation and Penetration Properties of a Shaped Charge with Zr41.2Ti13.8Cu12.5Ni10Be22.5 Liner

Application of W/Zr amorphous alloy for shaped charge liner

Adaptive material point method for shaped charge simulation

Smooth Particle Hydrodynamics-Based Characteristics of a Shaped Jet from Different Materials

The effect of three-layer liner on the jet formation and penetration capability of shaped charge jet

Forming Control of Rod-Shaped Tantalum-Tungsten Alloy Explosively Formed Projectile

Numerical Simulationand Analysis of a New Double Shaped Charge Liner Formed Penetrator

Using ALE Method to Carry out 3D Simulation of a New Style Shaped Charge Liner Configuration

Effect of explosives charges types on the jet characteristics, penetration performance and fragmentation patterns of shaped charges

Jet forming and optimization of charge structural parameters considering Al/PTFE liner reaction

Numerical Simulation of Forming Projectile with K-charge

Investigation of Penetration Performance of Zr-based Amorphous Alloy Liner Compared with Copper

Numerical Investigation of In-Flight Behavior of Fe-Based Amorphous Alloy Particles in AC-HVAF Thermal Spray Process

Numerical Simulation of Multiple Explosively Formed Projectile Warhead Forming Characteristics considering Various Materials

The Influence of Closed-Cell W-Shaped Liner Parameters on the Penetration Performance of Integral Annular Shaped Charge

Simulation Study on Expansive Jet Formation Characteristics of Polymer Liner

Study on Forming Law and Penetration of a Spherical Cone Composite Structure Liner Based on the Explosion Pressure-Coupling Constraint Principle

Study on Orthogonal Design of the Axial Ratio,the Acoustic Impedance of Aluminum,Bronze and Iron and the Space Between Covers Forming Double Oval Hollow Linear Jet Stream