Abstract:This work shows the performance of LincoSim, a web-based virtual towing tank enabling automated and standardized calm water computational fluid dynamics (CFD) data sampling, extending previous published applications to the case of a high-speed hull. The calculations are performed for a 1:10 scale model of a 43 ft powerboat hull form in the Froude number range from 0.3 to 2.0. The counterpart physical model is the experimental fluid dynamics (EFD) campaign performed at the University of Naples Federico II, where the resistance, sinkage and trim data have been measured. The EFD/CFD data comparison is performed and shown with a discussion of the spotted differences. The average percentage differences between the EFD and CFD data for the whole speed range are 1.84, 6.87 and 6.94 for the resistance, dynamic trim, and sinkage, respectively. These results confirm the maturity of the standardized and automated CFD modeling for calm water hydrodynamic analysis included in LincoSim, even at very high Froude numbers. The wetted length of the keel and chine and the wetted surface are calculated from numerical data using the advanced post-processing. Finally, as a work in progress, we test a first comparison for the same hull of the EFD and CFD data, considering two seakeeping conditions for head waves at a given wavelength for two velocity conditions. Also, this kind of analysis confirms the tight correlation between the measured and computed outcomes. This synergic interplay of EFD and CFD can link the advantages of both methods to support hull design but also requires experiment planning and final data analysis to obtain physical parameters not easily measurable in laboratory, such as the wetted surface, wetted lengths, proper viscous contribution, and pressure distribution both in calm water and in waves.

Revisiting the Serçe Limanı Sail Plan

Boat Trial Validation and Resistance Prediction of a 36-Foot Hydrofoil Catamarans Using CFD

Experimental Study on Dynamical Characteristics of Ship Lift System

Sail assist developments 1979–1985

An assisted propulsion device of vessel utilizing wind energy based on Magnus effect

Experiments and CFD of a variable-structure boat with retractable twin side-hulls: Seakeeping in waves

RANSE simulations for unmanned sailboat performance prediction: Coupling aerodynamics and hydrodynamics in self-sailing

Wing Sails: Numerical Analysis of High-Performance Propulsion Systems for a Racing Yacht

Design, modeling and experimental investigation of a novel solar sail with high area-to-mass ratios for efficient solar sailing

Investigation of the efficiency of wind-assisted systems using model-based design approach

Numerical Investigation of Single and Double Steps in Planing Hulls

Analysis of Dynamic Characteristics of Rotor Sail Using a 4DOF Rotor Model and Finite Element Model

Distinctive Features of Using the Propulsor of the Underwater Sail Type and the Direct-Flow Wave Propulsor on a Semisubmerged Catamaran

50’ Sail Catamaran with Hybrid Propulsion, Design, Theoretical and Experimental Studies

Aerodynamic performance of an OPTIMIST full-scale sail for various sail trims: An experimental study

On the performance of marine propeller in regular waves, Part I: Single Blade loads in moderate sea states

Characterization of a Solar Sail Membrane for Abaqus-Based Simulations

Unmanned sailboat with self-balancing rotating sail based on elastic rope: Modeling, optimization, and sea trials

Impact of the Longitudinal Center of Buoyancy on the Total Resistance of a Passenger Ship

Planing Hull Hydrodynamic Performance Prediction Using LincoSim Virtual Towing Tank

Experimental Study on a High-Speed Trimaran-Planing Boat