Abstract:Purpose: Rupture of an arterosclerotic plaque in the carotid artery is a major cause of stroke. Biomechanical analysis of plaques is under development aiming to aid the clinician in the assessment of plaque vulnerability. Patient-specific three-dimensional (3D) geometry assessment of the carotid artery, including the bifurcation, is required as input for these biomechanical models. This requires a high-resolution, 3D, noninvasive imaging modality such as ultrasound (US). In this study, a high-resolution two-dimensional (2D) linear array in combination with a magnetic probe tracking device and automatic segmentation method was used to assess the geometry of the carotid artery. The advantages of using this system over a 3D ultrasound probe are its higher resolution (spatial and temporal) and its larger field of view. Methods: A slow sweep (v = ± 5 mm/s) was made over the subject's neck so that the full geometry of the bifurcated geometry of the carotid artery is captured. An automated segmentation pipeline was developed. First, the Star-Kalman method was used to approximate the center and size of the vessels for every frame. Images were filtered with a Gaussian high-pass filter before conversion into the 2D monogenic signals, and multiscale asymmetry features were extracted from these data, enhancing low lateral wall-lumen contrast. These images, in combination with the initial ellipse contours, were used for an active deformable contour model to segment the vessel lumen. To segment the lumen-plaque boundary, Otsu's automatic thresholding method was used. Distension of the wall due to the change in blood pressure was removed using a filter approach. Finally, the contours were converted into a 3D hexahedral mesh for a patient-specific solid mechanics model of the complete arterial wall. Results: The method was tested on 19 healthy volunteers and on 3 patients. The results were compared to manual segmentation performed by three experienced observers. Results showed an average Hausdorff distance of 0.86 mm and an average similarity index of 0.91 for the common carotid artery (CCA) and 0.88 for the internal and external carotid artery. For the total algorithm, the success rate was 89%, in 4 out of 38 datasets the ICA and ECA were not sufficient visible in the US images. Accurate 3D hexahedral meshes were successfully generated from the segmented images . Conclusions: With this method, a subject-specific biomechanical model can be constructed directly from a hand-held 2D US measurement, within 10 min, with a minimal user input. The performance of the proposed segmentation algorithm is comparable to or better than algorithms previously described in literature. Moreover, the algorithm is able to segment the CCA, ICA, and ECA including the carotid bifurcation in transverse B-mode images in both healthy and diseased arteries.

Comparison of pre-mortem 2D-3D ultrasound examination to post-mortem micro-CT of carotid arteries – first experiences

Comparative study of contrast-enhanced ultrasonography and histopathology of the carotid plaque in patients undergoing carotid endarterectomy

New Technologies in the Assessment of Carotid Stenosis: Beyond the Color-Doppler Ultrasound—High Frame Rate Vector-Flow and 3D Arterial Analysis Ultrasound

Assessment of carotid atherosclerotic stenosis with ultrasonography versus CT angiography

Application of Contrast Enhanced Ultrasound in the Diagnosis of Carotid Plaque Characteristics：comparison with Magnetic Resonance Angiography

Correlation Between the Different Conventional Ultrasonic Performance and Microvessel Density in Atherosclerotic Plaques

0016: Analysis of Neovascularization Within Carotid Plaques in Patients with Ischemic Stroke Using Contrast-Enhanced Ultrasound

Preliminary Study on Evaluation of Neovascularization Within Carotid Soft Plaques with Contrast-Enhanced Three Dimensional Ultrasonography

Quantitative Assessment of Carotid Artery Atherosclerosis by Three-Dimensional Magnetic Resonance and Two-Dimensional Ultrasound Imaging: a Comparison Study

Imaging modality-dependent carotid stenosis severity variations against intravascular ultrasound as a reference: Carotid Artery intravasculaR Ultrasound Study (CARUS)

Imaging of Carotid Stenosis: Where Are We Standing? Comparison of Multiparametric Ultrasound, CT Angiography, and MRI Angiography, with Recent Developments

Automated 3D geometry segmentation of the healthy and diseased carotid artery in free-hand, probe tracked ultrasound images

Multiparametric ultrasound evaluation with CEUS and shear wave elastography for carotid plaque risk stratification

3-D Contrast-Enhanced Fusion Ultrasound for Accurate Volume Assessment of Vessel Lumen and Plaque in Carotid Artery Disease as Compared With Computed Tomography Angiography

Scan-rescan reproducibility of carotid atherosclerotic plaque morphology and tissue composition measurements using multicontrast MRI at 3T.

Assessment of Neovascularization of Carotid Artery Atherosclerotic Plaques Using Superb Microvascular Imaging: a Comparison with Contrast-Enhanced Ultrasound Imaging and Histology

Assessment of atherosclerotic plaque morphology using contrast-enhanced ultrasound and its impact on primary cardiovascular events following simultaneous carotid endarterectomy and coronary artery bypass grafting

Comparison of superb micro-vascular imaging and contrast-enhanced ultrasonography in the diagnosis of carotid artery plaque

Comparative Study of Multiple Detector Row Spiral CT Angiography (MDCTA) of Carotid Artery with the Digital Subtraction Angiography (DSA)

Study on the Consistency of Angiogenesis in Carotid Plaque Evaluated by Contrast‐Enhanced Ultrasound and Superb Microvascular Imaging and Its Correlation With Stroke Occurrence

[Clinical Cohort Study of Imaging Evaluation and Postoperative Pathology of Carotid Vulnerable Plaque].