Abstract:Abstract. In this paper, the planetary load-sharing behavior and fatigue life of different wind turbine gearboxes when subjected to rotor moments are examined. Two planetary bearing designs are compared – one design using cylindrical roller bearings with clearance and the other design using preloaded tapered roller bearings to support both the carrier and planet gears. Each design was developed and integrated into a 750 kW dynamometer tests, the loads on each planet bearing row were measured and compared to finite-element models. Bearing loads were not equally shared between the set of cylindrical roller bearings supporting the planets even in pure torque conditions, with one bearing supporting up to 46 % more load than expected. A significant improvement in planetary bearing load sharing was demonstrated in the gearbox with preloaded tapered roller bearings with maximum loads 20 % lower than the gearbox with cylindrical roller bearings. Bearing life was calculated with a representative duty cycle measured from field tests. The predicted fatigue life of the eight combined planet and carrier bearings for the gearbox with preloaded tapered roller bearings is 3.5 times greater than for the gearbox with cylindrical roller bearings. The influence of other factors, such as carrier and planet bearing clearance, gravity, and tangential pin position error, is also investigated. The combined effect of gravity and carrier bearing clearance was primarily responsible for unequal load sharing. Reducing carrier bearing clearance significantly improved load sharing, while reducing planet clearance did not. Normal tangential pin position error did not impact load sharing due to the floating sun design of this three-planet gearbox.

Research on load sharing characteristics of planetary transmission for NW high-power wind turbine gearbox

Analysis of Load-Sharing Behavior of the Multistage Planetary Gear Train Used in Wind Generators: Effects of Random Wind Load

Dynamic modeling and analysis of load sharing characteristics of wind turbine gearbox

Load sharing and distributed on the gear flank of wind turbine planetary gearbox

Planetary Gear Load Sharing of Wind Turbine Drivetrains Subjected to Non‐torque Loads

Load-sharing characteristics of planetary gear transmission in horizontal axis wind turbines

Dynamic characteristics analysis of planetary gear system with internal and external excitation under turbulent wind load

Three‐dimensional bearing load share behaviour in the planetary stage of a wind turbine gearbox

Research on Efficiency and Load Sharing Characteristics of High-Speed-Ratio Planetary Gear Transmissions

Study of Load Distribution and Sharing Characteristics of Planetary Geartrain for Wind Turbines

Dynamic Load Sharing Behavior for the Pitch Drive in MW Wind Turbines

Effect of Turbulent Wind Conditions on the Dynamic Characteristics of a Herringbone Planetary Gear System of a Wind Turbine

Comparison of planetary bearing load-sharing characteristics in wind turbine gearboxes

Effects of Non-torque Loads and Carrier Pinhole Position Errors on Planet Load Sharing of Wind Turbine Gearbox

Nonlinear dynamics modeling and analysis of transmission error of wind turbine planetary gear system

APPLICATION AND SIMULATION OF POWER SPLIT IN HYBRID TRANSMISSION WIND TURBINES

Dynamic Modeling and Analysis of Wind Turbine Drivetrain Considering the Effects of Non-Torque Loads

Experimental evaluation of the mesh load factor (Kγ) of a 6MW wind turbine gearbox

Nonlinear dynamic characteristics of wind power concentric planetary-face gear system with elastic lubrication and friction considering thermal effect under random wind load

Load sharing performance analysis of planetary gear system considering the coupling effects of gear pair and journal bearing