Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. Lightweight design is universally recognized as a critical criterion for many engineering problems. In addition to the well-developed topology optimization (TO) method, structural bionics is also considered an effective approach to developing innovative structure designs with lightweight. In the process of natural evolution, bamboo has developed a unique hollow structure with ingenious mechanical properties. Inspired by these characteristics, this paper selected bamboo as a bionic prototype to carry out bionic structure optimization of guide arm. First, the initial guide arm was modeled and simulated for its mechanical behavior. Secondly, similarity analysis between bamboo and guide arm was performed from three aspects, and the parametric bionic guide arm model was established step by step. Then, the key parameters affecting the performance of the bionic guide arm were verified by the parameter sensitivity analysis method. The multi-objective optimization was carried out with the minimum of the total mass and the maximum deformation of guide arm as the optimization objectives. The optimal solution of Pareto solution set was determined by multi-objective decision methods of the Technique for Order Preference by Similarity to an Ideal Solution (TOPSIS) and Gray Relational Analysis (GRA). Finally, finite element (FE) method was used to make a comparison between the initial model and the optimal bionic model in terms of mechanical performance. According to the results, under the premise of the mass of the optimized bionic model decreased by 17.44%, the maximum deformation was decreased by 9.24%, the equivalent stress was decreased by 17.33%, and the first-order frequency was increased by 22.92%. Comparison results showed that the proposed bionic model provided the best lightweight solution for guide arm. This study reveals that structural bionics provides a new solution for the lightweight design of guide arm and similar beam structural components.

Methods for lightweight design of mechanical components in humanoid robots

Generative Design of a Calf Structure for a Humanoid Robot Based on Gait Simulation

Studying on the Technique of Integration Analysis to Rigid-Flexible Mixture Virtual Prototyping in Complex Mechanic System

Topology Optimization of Biped Robot Based on Rigid-flexible Coupling Dynamics

Computational Design of Skinned Quad-Robots

Lightweight design of multi-material body structure based on material selection method and implicit parametric modeling

Novel Lightweight Hydraulic Integration Methodology for Robotic Applications

An Integrated Design and Simulation Environment for Rapid Prototyping of Laminate Robotic Mechanisms

Lightweight Chassis Components — The Development of a Hybrid Automotive Control Arm from Design to Manufacture

From CAD to URDF: Co-Design of a Jet-Powered Humanoid Robot Including CAD Geometry

Structure and process optimization and performance analysis of carbon fiber composite industrial robot big arm

Experimental development of lightweight manipulators with improved design cycle time that leverages off-the-shelf robotic arm components

A topology optimization method for collaborative robot lightweight design based on orthogonal experiment and its applications

TOPOLOGICAL OPTIMIZATION OF DESIGN ELEMENTS OF A ROBOTIC CELL

A Study on Topology Optimization of Aerospace and Automobile Components

Distributed design optimization of multi-component systems using meta models and topology optimization

Light-Weight Design Method for Force-Performance-Structure of Complex Structural Part Based Co-operative Optimization

A systems design approach for the co-design of a humanoid robot arm

Mechanical Design for Robot Locomotion

The Further Development and Refinement of an Expert-Systems Approach to the Creative Design of Mechanisms and Mechanical Systems

Bionic topology optimization design and multi-objective optimization of guide arm