Abstract:Experimental and analytical studies were carried out related to the detection and extinguishing of fires, the toxicity of products in equipment with oxygen-enriched media and at elevated pressure. Toxicity of combustion products in the pressurized pressure chambers is due to the release of aerosol particles and gaseous products of thermal-oxidative destruction of materials, for which empirical dependences are presented over a wide temperature range allowing calculations to determine the integral relative yields of reaction products. Analysis of the experimental results shows that the increase in the mass yield of aerosol particles occurs more intensely than that of toxic gases, and a noticeable release of gases begins at a temperature of about 523 K, while the release of dispersed particles occurs already at a temperature of approximately 473 K. At the early stage of thermal destruction in the temperature range 473–623 K, the yield of aerosols is 5 times higher than the yield of gases by mass. When the temperature rises close to the ignition temperature, the combustion source can be detected using gaseous products, in particular CO and CO2. Justification for the methodology for assessing the main parameters of fire extinguishing in the pressurized chambers is given. The most important elements of the main components, elements and installation as a whole are: inertia, intensity of supply of fire extinguishing agent. Dependence obtained analytically, which was confirmed in experiments, between the extinguishing time and the intensity of the supply of fire extinguishing agent is presented, which considers the characteristics of the environmental parameters in the chamber and the thermophysical properties of the flame. Dependences were obtained related to the extinguishing time on the intensity of the supply of sprayed water, on the size of the sample, and on the oxygen content in the chamber atmosphere. Results of the experimental studies indicate that changes in oxygen concentration in the atmosphere have a more noticeable effect on extinguishing parameters than changes in gas pressure.

Hazard identification posed by plant protection products during warehouse fires

Analysis of Flammability and Smoke Emission of Plastic Materials Used in Construction and Transport

Hazard evaluation of forest combustibles based on the correlation between pyrolysis products and combustion parameters

Assessment of Syngas Storage Tank Hazards Taking Account of the Domino Effect

Comprehensive laboratory study on smoke gases during the thermal oxidative decomposition of forest and vegetation fuels

Experimental and Analytical Studies of the Toxicity of Combustion Products, Detection and Extinguishing of Fires in the Pressurized Pressure Chambers in Environments Enriched with Oxygen and at the Alevated Pressure

Some relevant parameters for assessing fire hazards of combustible mine materials using laboratory scale experiments

Risk management and loss prevention strategies for fertilizer industries

Composition of the Gas-Air Mixture in the Containment and Suppression of Forest Fires with Promising Extinguishing Agents

The Influence of Hydrogen Concentration on the Hazards Associated with the Use of Coke Oven Gas

Organic contaminants formed during fire extinguishing using different firefighting methods assessed by nontarget analysis

Hazard Assessment of the Thermal Stability of Nitrification By-Products by Using an Advanced Kinetic Model

Hazard analysis of flue gases generate by coal mining conveyor belt fires

Combustion Characteristics of Materials and Generation of Fire Products

Calorimetric studies and lessons on fires and explosions of a chemical plant producing CHP and DCPO

The ecotoxicity and mutagenicity of fire water runoff from small-scale furnishing materials fire tests

Effect of Burn Parameters on PAH Emissions at Conditions Relevant for Prescribed Fires

The Effects of Thermal Pyrolysis and Decomposition Products on Explosive Characteristics of Flufenacet and Sulfentrazone

Combustion Behavior Characterization of Major Crops Through Cone Calorimeter

Fire Safety for Green Façades: Part 1: Basics, State-of-the-Art Research and Experimental Investigation of Plant Flammability